Products
our commitment to nickbaler
Position:Home > Products <<    Return
NK30LT 45kg Used Clothes Press Baler
45kg Used Clothes Press Baler Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. and get 45kg for mainly purpose ,its Hydraulic lifting chamber door improves the work efficiency,
  • Series :Vertical Clothes Balers
  • Port :China
  • Mini Order :1 Units
  • Payment :T/T L/C
  • Service :12 Month
  • Certification :CE SGS TUV
Parts use

Nick Baler company manufactures & standard model of Clothes vertical balers ranging in size from 400-1200mm , main used in garment and used clothes recycling area, the structures with one ram baler ,two ram baler ,double chamber baler and one time compression baler too, with high-density vertical balers are easy to use and maintenance friendly and provides years of trouble-free recycling, Therefore ,your best choice,That is Nick Baler.

The Nickbaler success in the recycling baler sector is attributable to the unique lifting chamber loading system in combination with the manual control system. 

These two unique features allow the Nickbaler to function with a much lower labour input requirement and make our balers the got to machines for serious used clothes management compacting solutions.Due to its compact design the nickbaler requires less valuable floor space in the business premises than other comparable balers.

IMG_0208.jpgIMG_20180530_141908.jpg
mmexport1546499807146.jpgmmexport1546499833753.jpg


Part specification

Textile/Clothes Balers

 

Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the tight crossed tying.

 

Features

● Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the ‘# ‘tying
● The ram will stop running downwards when the feeding gate is opened which ensure the safety of the operation
● Equipped with independent emergency stop for safe operation
● Special ram guides design makes the platen not slope because of uneven materials feedings during compression

Model

NK30LT

Hydraulic power

30Ton

Packaging size(L*W*H)

600*400*400-600 mm

Feed opening size(L*H)

600*460mm

Chamber Size (L*W*H)

600*400*1200 mm

Bale weight

45-100Kg

Capacity

10-12 Bale Per hour

System Pressure

25Mpa

Packing materials

Cross packing

Packing way

Front-Back 4 pcs/ Left-Right 2 pcs

Voltage(can   be customized)

380V/50HZ

Power

7.5KW/10HP

Machine size(L*W*H)

1300*760*3780mm

Weight

1800Kg


Product Application
  • Used Clothing Baler wool baler Fiber Baler Machine
  • Wool baler Fiber Baler Machine
  • Wool baler Fiber Baler Machine
  • Maintenance of small hydraulic baler
Video introduction
Leaving a message
Relevant Assorises nkbaler IS THE BEST BALER MACHINE PRODUCER IN CHINA
  • Mineral Water Bottle Baling machine

    1. The rail steel bag outlet, fully automatic microcomputer control electric box, can realize automatic feeding, automatic pressing and automatic out of the bag, which effectively saves labor costs.

    2. Remote control of the electric box, simple and convenient operation, remote control is also possible. You can choose the control method according to your own habits.

    3. 4-layer steel wire high pressure tubing, the tubing is wear-resistant, high-density, and thick-walled to ensure no oil spray or oil leakage during work.

    4. Brand high pressure plunger pump, high pressure plunger pump, high efficiency, low noise and high quality. The flow part from the inlet to the outlet of the oil pump is made of cast iron. The pump body is non-corrosive and anti-wear hydraulic oil medium.


    瓶子4.jpg瓶子5.jpg
    瓶子6.jpg

    瓶子7.jpg








  • Scrap Rubber Cutting Machine

    This Rubber Hydraulic Cutting Machine used for cutting all kinds of large sized natural rubber or synthetic rubberproducts,such as large plastic tubes,bale film,rubber lump,sheet materials and etc. this machine used two cylinder to cut ,and keep it balance,mainly consists of rubber knife,
    frame, cylinder, base, auxiliary table, hydraulic system, and electric system.
    Its with NIck brand company design and special developent on this point for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber into small pieces. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder


    Machine Features :

    1.Hydraulic control operation ,manual feeding ,auto-cutting .

    2.Hydraulic system stabilization , double cylinder balance cutting .

    3.It can fix security masks and safety nets equipment for protecting .

    4.It can fix auto-roller processing after cutting .


  • NK-T60L 45kg Used Clothes Bale Press Machine

    Textile/Clothes Balers


    NK-T60L 45kg Used Clothes Bale Press Machine Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the tight crossed tying.


    Features


    1.Double chamber Structure for carrying out loading and baling synchronously to increase working efficiency

    2.Cross Strapping for making tighter and neater bales 

    3.Availability for Bale Wrapping either plastic bags or sheets can be used as the wrapping material, protecting the textile material from getting damp or stained

    4.Adjustable Bale Height for achieving various bale size and weight 

    5.Electric Controlled for easy operation, simply operating on buttons to move platen upward and downward.


  • NK-T120S Double Chambers Used clothing baler Suppliers

    Textile/Clothes Balers


    NK-T120S Double Chambers Used clothing baler Suppliers Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the tight crossed tying.


    Features

    1.Double chamber Structure for carrying out loading and baling synchronously to increase working efficiency

    2.Cross Strapping for making tighter and neater bales 

    3.Availability for Bale Wrapping either plastic bags or sheets can be used as the wrapping material, protecting the textile material from getting damp or stained

    4.Adjustable Bale Height for achieving various bale size and weight 

Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top