Products
our commitment to nickbaler
Position:Home > Products <<    Return
NKY81-2500B Hydraulic Metal Scrap Baler Copper Baler
Hydraulic Metal Scrap Baler Copper Baler are applicable in Metal recycling companies, to press metal scraps (steel, copper, aluminum,stainless steel) into acceptable furnace charges and reduce the transport cost.
  • Series :Scrap Metal Horizontal Balers
  • Port :China
  • Mini Order :1 Unit
  • Payment :T/T.L/C
  • Service :12 Month
  • Certification :CES SGS TUV
Parts use

Hydraulic scrap Metal baler can be manual control hydraulic baler and PLC control hydraulic baler by classification. Most of these hydraulic balers have several baling applications. Some hydraulic balers have specific features to suit certain materials and better baling. So what is the best baler for you? In a word, the baler which can produce your ideal bale size and weight in maximum number of bales per hour, is your best choice. Of course, it is very important that this baler is affordable for you.

微信图片_20200813090452 拷贝.jpgghs 拷贝.jpg


Part specification

Nick Baler has a complete line of hydraulic scrap balers in our product range. From vertical baler to horizontal baler, from mini baler to large fully automatic horizontal baler, from single ram baler to two ram baler, from cardboard baler to tyre baler, From metal baler to car baler ,you can always find your materials for baling solutions here. For one kind of waste materials, you can have several selections. Take cardboard baler for example, mini cardboard baler is suitable for vessel because it requires little space. Mill size baler is quite good to supermarket's warehouse because the purchase cost is competitive and baling output is enough there. Manual-tie horizontal cardboard baler is ideal for a cardboard recycling center. And large fully automatic horizontal cardboard baler is the right choice for large distribution center or recycling center.

 

1

Main  pressure cylinders

Type

YG340/220-1000

Quantity

1 units

Intended push force

2500KN

return trip size

1000mm

2

Main  pressure cylinder

Type

YG220/160-1500

Quantity

2units

Intended push force

950KN×2

return trip size

1500mm

3

Turn cylinder

Type

YG125/80-400

Quantity

1unit

Intended push force

80KN

return trip size

400mm

4

Door lid cylinder

Type

YG180/120-1635

Quantity

1unit

Intended push force

635KN

return trip size

1635mm

5

Pressure Indoor Size

2000×1400×900mm

6

Bale size

500×500mm

7

Cycle time

S

~100s

8

Motor

Type

Y200L2-6

power

22KW

Pressure Indoor Size

970rpm

Quantity

2sets

9

Hydraulic working power

25MPa

10

Pumps

Model

160YCY14-1B

maximum pressure

31.5MPa

Intended row capacity

160ml/r

Quantity

2units











 


Product Application
  • Waste Paper Horizontal Baling Machine
  • Waste Magazine Baling Press Machine
  • Waste Kraft Paper Bale Press
  • Waste corrugated box Baling Machine
Video introduction
Leaving a message
Relevant Assorises nkbaler IS THE BEST BALER MACHINE PRODUCER IN CHINA
  • Crocodile shearing machine

    Equipment scope








    Applicable to the processing equipment of ZTE scrap steel shearing, used for light and thin materials, steel bars, steel plates, round steel, steel pipes, scrap steel, copper scrap and other structural parts, stainless steel, metal briquettes, automobiles, aluminum alloys, copper parts, steel wires, Iron wire, waste steel and other materials are cut by cold work.








    Features:




    1. The gantry shear adopts hydraulic transmission. Compared with the mechanical transmission shear, it has the advantages of small volume, small inertia, smooth movement, simple operation, flexible operation, large cutting section, convenient adjustment of the scissors mouth, etc. The operation is safe and easy to use Realize overload protection.




    2. Gantry shearing machine has manual, automatic and remote control functions. The operation control is convenient and simple. The shear mouth starts and stops at any position where the work process is heavy, and the size of the shear mouth can be arbitrarily controlled according to the size of the cut material. , To obtain economic work efficiency




    3. The rapid design of the gantry shearing machine can change the speed faster without increasing the power of the motor and the displacement of the oil pump.Equipment scope








    Applicable to the processing equipment of ZTE scrap steel shearing, used for light and thin materials, steel bars, steel plates, round steel, steel pipes, scrap steel, copper scrap and other structural parts, stainless steel, metal briquettes, automobiles, aluminum alloys, copper parts, steel wires, Iron wire, waste steel and other materials are cut by cold work.








    Features:




    1. The gantry shear adopts hydraulic transmission. Compared with the mechanical transmission shear, it has the advantages of small volume, small inertia, smooth movement, simple operation, flexible operation, large cutting section, convenient adjustment of the scissors mouth, etc. The operation is safe and easy to use Realize overload protection.




    2. Gantry shearing machine has manual, automatic and remote control functions. The operation control is convenient and simple. The shear mouth starts and stops at any position where the work process is heavy, and the size of the shear mouth can be arbitrarily controlled according to the size of the cut material. , To obtain economic work efficiency




    3. The rapid design of the gantry shearing machine can change the speed faster without increasing the power of the motor and the displacement of the oil pump.

    Model  

    Cutting   pressure(Ton)

    Capacity  

    (T/H)

    Blade   length

    (MM)  

    Cutting   speed

    (Time/Min)  

    Power  

    KW

    NKLMJ-315

    315

    3-5

    1200

    2-4

    22*2

    NKLMJ-400

    400

    4-7

    1400

    2-4

    37*2

    NKLMJ-500

    500

    5-8

    1500

    2-4

    45*2

    NKLMJ-630

    600

    8-10

    1600

    2-4

    45*3

    NKLMJ-800

    800

    12-15

    1800

    2-4

    55*3

    NKLMJ-1000

    1000

    15-20

    2000

    2-4

    55*4

    NKLMJ-1250

    1250

    20-30

    2500

    2-4

    55*4

    NKLMJ-1500

    1500

    30-50

    2500

    2-4

    75*4

    NKLMJ-2000

    2000

    60-80

    2700

    2-4

    75*6


  • Heavy metal scrap baling shear

    Hydraulic heavy metal shear baler scrap cars press baling shear  is suitable for the steel plants, recycling companies, ferrous & non-ferrous metal smelting industry to compress metal scrap(steel parings, waste steel, waste copper & aluminum, waste stainless steel, scrap from discarded automobiles) into acceptable furnace charges of cuboids, , so as to reduce the cost of transportation & smelting, to speed up furnace charging.then cut the bale after baled into pieces.

    This machine use high pressure Hydraulic drive,with PLC control and make sure the safety .
    the cover door use hydraulic locked gate ensures more convenient operation, unique double-cutting design of cutters improves the cutting efficiency and lengthens the lifespan of the cutters.
    The Bale-discharging:"turn-out",big square metal cutting shearer equiped. and Big enough pressing room to feed large size scrap.

    625345505_1157260677 拷贝.jpgNK1580T200  1 拷贝.jpg


  • Hydraulic scrap metal cutting steel shear machine

    hydraulic alligator metal shears are applied in recycling companies, automobile dismantling plants, smelting & casting industry to cold-shear section steel and metallic structural parts into acceptable furnace charges. this type alligator metal shears can work automatic continuous and manual single operation,which are the best equipment for light furnace charge and steel cutting.

    22-126683752 拷贝.jpg鳄鱼式剪切机,+鳄鱼式液压金属剪切机 拷贝.jpg



  • NKY81-2000B Scrap Metal Baler Supplier

    Hydraulic scrap Metal baler can be manual control hydraulic baler and PLC control hydraulic baler by classification. Most of these hydraulic balers have several baling applications. Some hydraulic balers have specific features to suit certain materials and better baling. So what is the best baler for you? In a word, the baler which can produce your ideal bale size and weight in maximum number of bales per hour, is your best choice. Of course, it is very important that this baler is affordable for you. Scrap Metal Baler Supplier be used to compress scrap metals, scraps, scrap aluminum, scrap copper, scrap stainless steel.


     in recycling companies, metal processing companies, steel companies.


    to Reduce the deliverying cost and scrap recycling cost

    c297af619f30cf4a9108a21332ac0a99 拷贝.jpgIMG_20180817_141257 拷贝.jpg


Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top