News Center
our commitment to nickbaler
  • Nick brand horizontal waste paper baler is safe, reliable, low power consumption, economical and reasonable, easy to use, simple to maintain and operate, and is a good helper for your production.

    The recycling and utilization of waste paper is a measure to reduce waste of resources and greatly increase production efficiency in our country.

    IMG_20190813_152525 拷贝.jpg

    Before the horizontal waste paper baler packs waste paper, the waste paper must be sorted, processed, and deinked before it can be packaged. If the waste paper recycling process is not strictly sorted. This results in the mixing of different types and grades of waste paper.

    In this way, it is difficult for paper mills to produce different products using different types of waste paper, which affects the quality of waste paper recycled pulp and increases costs; it also limits the packaging capacity of the horizontal waste paper baler.

    Therefore, Nick Machinery advises customers to sort and pack the raw materials after they have been purchased. It is best to store them in a place that is sheltered from wind and rain. When they are stored, they can be transported to paper mills and other places. This can reduce the waste of waste paper raw materials. It is also convenient for paper mills, and at the same time can obtain higher economic benefits.

    If you are interested or have questions about the above horizontal waste paper baler, please log in to our company's website: www.nkbaler.com, or call: 86-29-86031588

    21-01-15
  • Nick brand automatic baler has simple structure, stable action, simple operation, low failure rate and easy cleaning and maintenance. It is your best choice.

    Because my country's demand for paper is increasing, it is estimated that by 2021, my country's paper and paperboard production will reach 60 to 65 million tons, and its total annual pulp consumption will be 54.6 million to 59.2 million tons. By then, the output of wood pulp will be 17.8 million tons, accounting for 30%, and the output of waste paper pulp will reach 31.4 million tons, accounting for 53%. This means that the output of waste paper pulp will double in the next 10 years. Such a large demand for waste paper raw materials cannot be met by imported waste paper alone. The way out is to increase the domestic waste paper recycling rate.

    However, domestic use of waste paper recycling equipment is still at the stage of semi-automatic or even manual operation. In order to solve the contradiction between waste paper recycling efficiency and market demand, Nick Machinery developed and produced the NKW180Q series of hydraulic fully automatic Waste paper baler, this equipment realizes the automation of the whole process of paper feeding, squeezing, threading and Baler, and unBaler.

    IMG_20190813_173258 拷贝.jpg

    NKW180Q series hydraulic automatic baler is easy to operate, stable in operation, reasonable in price, model, and performance is currently in the leading position in the market. It is comparable to imported baler of the same type. It is a waste paper baler with high cost performance.

    It is a new product that effectively improves waste paper recycling and improves transportation efficiency. It is also an essential product for realizing the automation of waste paper recycling and enterprises.

    For more information about the fully automatic hydraulic baler models and detailed configuration requirements, please log on to the Nick Machinery website www.nkbaler.net, Tel: 86-29-86031588, best-selling models: NKW160Q, NKW200Q, and support custom-made various models of baler ,welcome.


    21-01-15
  • Nick brand automatic hydraulic baler has simple structure, stable action, simple operation, low failure rate and easy cleaning and maintenance. It is a good helper for your production.

    Before we buy hydraulic Baler equipment, we always care about the core components of hydraulic Baler equipment, such as the cylinder, motor, oil pump, oil tank, and hydraulic equipment frame of the hydraulic Baler machine. Next, Nick Machinery will introduce to you.

    The hydraulic cylinder is a linear actuator whose output force is proportional to the effective area of ?the piston and the pressure difference between both sides.

    850550112639171837 拷贝.jpg

    Its function is to convert hydraulic energy into mechanical energy. The input of the hydraulic cylinder is the flow and pressure of the fluid, and the output is the speed and force of the linear motion. The piston of the hydraulic cylinder can complete linear reciprocating motion, and the output linear displacement is limited.

    The hydraulic cylinder is an energy conversion device that converts hydraulic energy into mechanical energy of reciprocating linear motion.

    The hydraulic cylinder of the hydraulic baler consists of a cylinder tube and a cylinder head, a piston and a piston rod, a sealing device, a buffer device and an exhaust device. The buffer device and the exhaust device depend on the specific application, and other devices are essential.

    The hydraulic cylinder is an indispensable core component of the hydraulic baler. A good hydraulic cylinder plays an important role in the hydraulic baler.

    862714578880469543 拷贝.jpg

    Nick Machinery attaches great importance to the components in the hydraulic balers, and only by selecting good materials can they produce excellent quality hydraulic balers.

    For more information about the fully automatic hydraulic baler models and detailed configuration requirements, please log on to the Nick Machinery website www.nkbaler.net, Tel: 86-29-86031588, best-selling models: NKW160Q, NKW200Q, and support custom-made various models of baler ,welcome.


    21-01-15
  • The recycling and reuse of waste tires can not only save resources but also reduce pollution, and may also create considerable economic benefits. It is an important part of my country's development of circular economy. Data show that in 2018, the value of waste tire recycling in my country reached 7.48 billion yuan, a year-on-year increase of 1.8%.

    tire bales.jpg

    In recent years, driven by the continuous increase in car ownership, the amount of waste tires has maintained a steady growth. In 2017, the global production of waste tires was 41.652 million tons, and the recycling volume of waste tires was 30.238 million tons. It is estimated that by 2019, global production and recycling will reach 46.502 million tons and 35.84 million tons, respectively. Although there are still some gaps between my country and developed countries in the recycling of waste tires, the amount of waste tire recycling has maintained a small increase in recent years. It is estimated that by 2019, my country's waste tire production will reach 13.4 million tons, and the recycling volume will also maintain a growth trend.

    The NKOT150 scrap tire baler produced by Nick Machinery can compress and pack scrap tires, reduce storage space for scrap tires, reduce transportation costs, and contribute to the scrap tire recycling industry. www.nkbaler.com


    21-01-04
  • Our country has attached great importance to the recycling, processing and utilization of waste tires. Through laws and regulations, it has established a network and payment mechanism for the recycling and utilization of waste tires, established special funds, implemented financial subsidies, tax reductions and other operational measures, and gradually moved towards an internationally integrated model.

    There are four main ways to recycle used tires:

    NK-OT150.jpg

    1. Reuse of the prototype means that the waste tire is not qualitatively changed, only its appearance is changed, and methods such as bundling, cutting, and punching are often used to transform waste tires into useful items.

    2. Burning and recycling, waste tires are a kind of high calorific value material. Burning 1KG of waste tires has 69% higher calories than wood, 10% higher than bituminous coal, and 4% higher than coke.

    3. Production of reclaimed rubber

    Reclaimed rubber is to pulverize waste rubber, and then perform physical and chemical reaction processes such as heating and mechanical treatment on these pulverized materials. After these treatments, the resulting elastic state and viscous rubber can be vulcanized to form rubber again. This method can reduce the cost of producing rubber to a certain extent and improve the performance of the rubber during processing.

    4. Refurbishment and utilization of waste tires

    Retreading is to cut off the worn-out areas of the used tires, then fill them with rubber, and then reuse them after being treated by vulcanization methods.

    NKOT180.jpg

    Regardless of the four methods you use, the recycling, storage and transportation of waste tires are inseparable from the tire baler. The waste tires packaged by the tire baler have a small storage area and are convenient for transportation, saving manpower and costs. High-quality equipment for waste tire recycling, you are welcome to come to Nick Machinery for more detailed information on the baler.www.nkbaler.com

    21-01-04
  • Now we are all vigorously advocating low-carbon environmental protection. When it comes to the use of environmentally friendly waste materials, we have to talk about it. In the process of our daily driving, car tires are relatively easy to be eliminated. Generally, our car tires have to be replaced once in two or three years or 50,000 to 60,000 kilometers. If the tires are accidentally scratched or burst In the case of tires, they must be replaced in advance.

    ddot150.jpg

    Generally, part of the car tires we replaced will be used as retreaded tires, but most of them will be used to disassemble and reuse. Of course, some ingenious people will make tires into swings, seats and other artworks, and some waste tires are used in playgrounds and other places.

    NKOT180.jpg

    Scrap tires are hollow and large in size. They require a lot of space for storage and are not easy to transport. Therefore, Nick Machinery has specially developed a tire baler for this purpose. The NKOT180 tire baler has two cylinder compression, movable and fixed dual rebound devices, and professional tires and other high-elastic materials design. The maximum Baler size of NKOT180 is 2100*1200*1250mm, 4-5 packs can be packed per hour, and the weight of each pack ranges from 1300-2000KG.

    NKOT180 tire baler is mainly used in 4S shops, waste tire recycling stations, etc. If you have any needs in this regard, you can contact us for sales 86-29-86031588, and Nick Machinery can tailor the program for you. www.nkbaler.com


    21-01-04
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top