News Center
our commitment to nickbaler
  • The cotton waste baler is mainly suitable for compacting,binding,and packing the soft and space-consuming waste cotton.Effectively save manpower,material resources and financial resources for your organization.It is convenient for your storage and transportation.

    Characteristics of waste cotton baler

    1.This machine adopts hydraulic transmission.Compared with mechanical transmission baler,it has the characteristics of small size,light weight,low movement inertia,low noise,good dynamic performance and high work efficiency.

    纺织品3.jpg

    2.This machine adopts integrated control of mechanical,electrical and hydraulic,which can be started and stopped at any position,and it is easy to realize overload protection.

    Nick brand waste cotton baler has simple structure,small volume,simple daily operation and maintenance,convenient transportation and storage,continuous operation and high efficiency.


    20-09-07
  • The box shear is an efficient scrap processing equipment.The original designer of the box shear comes from Europe.It has a compact structure and a one-piece design for easy movement.It can be controlled by a hybrid of an engine and an electric motor,or it can be controlled separately by an engine or an electric motor.

    The biggest advantage of the box shear is its high overall utilization.It can be mainly reflected in labor,energy consumption,mechanical loss,equipment maintenance costs,etc.

    The box-type shearing machine body is welded with high-strength manganese plates,and the easily worn parts are lined with imported 900 high-strength wear-resistant plates.The blades of the box-type shearing machine are made of alloy steel,which can withstand a long time.High-intensity work.

    箱式1.jpg

    The hydraulic system of the box-type shearing machine adopts hydraulic circulation design,which speeds up the cutting speed of the box-type shearing machine.The general box-type shearing machine can only cut 3.5 times a minute,and the cycle design can reach 4.5 times.Speed greatly improves work efficiency.

    Nick Company is a professional company engaged in the development,production,sales and service of hydraulic machinery and packaging machinery.It is your best choice to build professionalism with concentration,reputation with integrity,and sales with service.


    20-09-07
  • The metal baler is suitable for steel mills,recycling and processing industries,crushing and non-ferrous and ferrous metal smelting industries.All kinds of metal scraps,steel shavings,scrap steel,scrap aluminum,scrap copper,scrap stainless steel,scrap cars,etc.can be extruded into rectangular,cylindrical,octagonal and other shapes of qualified charge to reduce transportation and torch costs

    So how to choose a metal baler?

    1.If you want to choose a metal baler that satisfies you and your production,you must first look at its quality.Good quality can be better produced.

    2.It depends on whether the baler is good or not,including its efficiency,infrequent failures,long service life,etc.This is the prerequisite for ensuring the maximum efficiency of the equipment.

    金属14.jpg

    3.It depends on the applicability of the baler.If a piece of equipment can meet the production needs of a variety of bales,it will not only save costs for the enterprise,but also maximize the benefits.

    Nick is a professional company engaged in the development,production,sales and service of hydraulic machinery and packaging machinery.It is your best choice to focus on creating professionalism,building reputation with integrity,and building sales with service.


    20-09-07
  • The metal shavings briquetting machine can directly cold press powdered cast iron shavings,steel shavings,copper shavings,aluminum shavings,excellent mineral powders,etc. into cakes for easy transportation and casting.Not only does it ensure that the original raw materials remain unchanged,the water output rate is increased,and the recovery loss of the furnace does not exceed 10%.The molding also ensures that the original raw materials remain unchanged.The metal chip briquetting machine flow control valve uses the saving port area between the regulating spool and the valve body and the part of the resistance it generates to regulate the flow,thereby controlling the movement speed of the fulfilling element.The flow control valve is divided into 5 types according to its use:

    1.Saving valve:After setting the saving port area,the movement speed of the fulfillment element that does not change much in load pressure and does not require high uniformity of movement is basically stable.

    金属2.jpg

    2.Speed:control valve:When the load pressure changes,the pressure difference between the inlet and outlet of the saving valve can be maintained as a fixed value.In this way,after the saving port area is adjusted,no matter how the load pressure changes,the speed control valve can maintain the same flow rate through the saving valve,so that the movement speed of the fulfilling element is stable.

    3.Diversion valve:Regardless of the size of the load,the equal diversion valve or synchronization valve can be used to obtain the same flow of two fulfillment elements of the same oil source;the share diversion valve is the share distribution valve that obtains the flow according to the share.

    4.Collecting valve:The effect is opposite to that of the diverting valve,so that the flow into the collecting valve is distributed in proportion.

    5.Diverting and collecting valve:It has both functions of dividing valve and collecting valve.

    Nick brand metal baler is easy to operate, safe and energy-saving, it is your best helper.


    20-09-07
  • The horizontal waste paper baler is a hydraulic compression baler that is better for us to carry out waste paper shells,cardboard,paper scraps and other fluffy materials.It can ensure that the finished paper bales of the baler are tidy,which is beneficial to storage,transportation and handling.

    1.Tighten the fasteners at the joints of the tubing,otherwise there will be no pressure in the cylinder due to air leakage.

    2.The oil inlet pipe and the oil return pipe are connected according to the thickness of the caliber,and the oil return pipe returns to the fuel tank.

    3.The hydraulic oil (46#) should not be less than 2/3 of the oil tank during the initial installation.

    废纸.jpg

    4.The power supply voltage is 380V.After the power supply is connected,test the direction of rotation of the oil pump and motor after the power supply is connected.There is a mark on the oil pump.Rotate according to the direction of the mark.If the direction of rotation is opposite,the power supply is reversed.

    5.After the tubing and the power supply are connected,the empty machine (without filler) is tested and run according to the operating procedure to see if there is any problem.If the operation is normal,the filler can be pressed.

    The Nick brand waste paper baler is simple to operate and automatically discharges the bale,which improves work efficiency.The installation of emergency stop settings makes the operation safer.


    20-09-07
  • The horizontal waste paper baler is a hydraulic compression baler that is better for us to deal with fluffy materials such as waste paper shells,cardboard,paper scraps,etc.It can ensure that the finished paper bales of the baler are tidy,which is conducive to storage,transportation and handling. 

    But how much can you know about installing and debugging the Compactor Baler?

    1.Installation of the baler machine:Choose a horizontal position when installing the baler,and the baler should not be installed in direct sunlight.Installing the baler in a well-ventilated environment is conducive to the heat dissipation of the baler during work.

    2.Test of the power supply of the Compactor Baler:Install the Compactor Baler's power supply according to the manual of the Compactor Baler,and then turn on the main switch of the Compactor Baler to check whether the Compactor Baler can start normally.

    废纸1.jpg

    3.Debugging of the baler machine:After the power supply is notified,start to check the machine.First,adjust the speed of the baler to the bottom position,turn on the switch,and test to see if the baler can work normally.

    After the Compactor Baler is running,test whether the performance of each switch of the Compactor Baler can operate normally,and whether each device is abnormal in its work.

    The Nick brand waste paper baler is simple to operate and automatically discharges the bale,which improves work efficiency.The installation of emergency stop settings makes the operation safer and perfect after-sales.


    20-09-07
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top