News Center
our commitment to nickbaler
  • The household garbage vertical baling machine is specially used for packing household garbage,waste paper,waste plastic,etc.It is widely used in factories,ships,hotels,tourist resorts and other places.It can compress the volume of articles and facilitate transportation.

    So,do you know what causes the wire failure in the daily production of the household garbage vertical baling machine?

    1.The electrode is not well welded,and the joint is loose and welded again,and then welded again.

    2.The voltage is too low or unstable.Check the voltage across the solenoid.The change value should be within 10 of the rated voltage.

    3.The coil insulation is poor and leakage occurs,so the coil needs to be replaced.

    20201009_093318_001.jpg

    4.If the electromagnet core fails,it cannot be attracted.The solenoid core must be replaced.

    5.The push rod is too long to accurately suck the solenoid valve core.You need to trim the putter to the proper position.

    6.The electromagnet works at high frequency, which will cause the iron core to dry and cause heating and expansion,which will cause the iron core to jam and repair.The core needs to be replaced.

    The NK6040T10 household garbage vertical baling machine produced by Nicke Company has simple operation and automatic bale delivery,which improves work efficiency and installs emergency stop settings to make the operation safer.

    Website:www.nkbaler.net,or call:86-29-86031588


    20-10-09
  • Everyone knows the waste paper vertical baling machine,but do you know the hydraulic movement of the waste paper vertical baling machine?What controls it?

    1.The movement direction of the hydraulic cylinder of the waste paper vertical baling machine is controlled by the reversing valve. 

    The pressure oil output from the hydraulic pump of the waste paper vertical baling machine enters the lower part of the hydraulic cylinder through the throttle valve and the left ring groove of the reversing valve valve along the pipeline.Cavity.

    Under the action of the pressure oil of the waste paper vertical baling machine,the piston moves upward and the pushing mechanism realizes the lifting action. 

    At this time,the oil discharged from the upper cavity of the hydraulic cylinder flows back to the oil tank through the ring groove and pipeline on the right side of the valve core of the reversing valve.

    4.jpg

    2.The movement speed of the hydraulic cylinder is controlled by the throttle valve.The pressure oil output by the hydraulic pump of the waste paper vertical baling machine flows through the one-way valve and is divided into two paths,one through the throttle valve to the hydraulic cylinder,and the other through the overflow valve back to the tank.

    When the lifted external load exceeds the carrying capacity set by the overflow valve,the oil pressure reaches the high pressure of the hydraulic pump. 

    At this time,the hydraulic force acting on the steel ball pushes the steel ball open,and the pressure of the waste paper vertical baling machine The oil flows directly back to the tank through the overflow valve and the oil return pipe,and the oil pressure will not continue to rise.

    Therefore,the overflow valve also plays a role in making the system have overload safety protection.

    Nick is a professional company engaged in the development,production,sales and service of hydraulic machinery and packaging machinery.It has a good brand,good quality and perfect after-sales service.Is your best choice.

    Website: www.nickbaler.net,or call: 86-29-86031588


    20-10-09
  • Chipless processing is a common processing method for the physical and mechanical properties of the surface layer of a hydraulic Heavy Duty Baler.Because of its simple process and low cost,it has been applied in actual production.

    The chip-free processing methods are shot blasting and hydraulic processing,and liquid abrasive strengthening processes are also used,which are all referred to as hydraulic Heavy Duty Baler surface strengthening processes.

    1.Work hardening of the surface layer of the hydraulic Heavy Duty Baler.

    2.The metallographic structure change of the surface layer of the hydraulic Heavy Duty Baler is grinding.

    废纸1 拷贝.jpg

    3.The residual stress of the surface layer of the hydraulic Heavy Duty Baler.

    4.Measures for the physical and mechanical properties of the surface layer of the hydraulic Heavy Duty Baler.

    Nick hydraulic Heavy Duty Baler has simple structure,stable action,simple operation,low failure rate and easy cleaning and maintenance.It is a good helper for your production.

    Company website:www.nickbaler.net,Tel: 86-29-86031588,looking forward to cooperating with you.


    20-10-08
  • Accumulating customer resources is a work that every sales company has to do,but retaining customers is difficult.

    If we want to do a good job of our own products,we must retain customers,so how do hydraulic Heavy Duty Baler manufacturers retain customers?

    1.Make a good product.The so-called good products are products that are of good quality and trusted by users.Such products do not need to be promoted by themselves,customers will also help promote,and naturally they will have a good reputation.

    2.There must be good service.Many companies think that the packer will not be broken,and there is no after-sales service.There is no service.

    In fact,service is in many links of the entire sales,depending on whether you are careful.

    IMG_2996 拷贝.jpg

    3.Do not deceive customers.Honesty and trustworthiness are the traditional virtues of the Chinese nation.

    But in the process of doing business,in order to facilitate the order,many business personnel sometimes exaggerate and say that they cause dissatisfaction with the customer,and then lose the customer's,then also lose the order.

    Nick Machinery is a professional company engaged in the development,production,sales and service of hydraulic machinery and packaging machinery.It is your best choice to focus on creating professionalism, building reputation with integrity,and creating sales with service.

    Nick company's website:www.nickbaler.net,or call: 86-29-86031588


    20-09-30
  • With the gradual changes in our lives,no matter what kind of equipment,after a period of use,there will always be an aging state of the machine.

    In this case,our machines will be unusable,causing our property losses.

    Therefore,for the automatic waste paper Heavy Duty Baler,the maintenance of the automatic waste paper Heavy Duty Baler is also very important.Next,I will explain the aging problem of the automatic waste paper Heavy Duty Baler.

    废纸1 拷贝.jpg

    First of all,the maintenance of the automatic waste paper Heavy Duty Baler often determines the service life of the machine itself and the efficiency of the machine.

    The automatic waste paper Heavy Duty Baler is also classified as a mechanical type,and its process requirements are relatively high,and its structural parts will be mass-produced after strict inspection.

    The irregular density of structural parts can also cause problems with hydraulic Heavy Duty Balers.

    For this,try to choose branded products when choosing a fully automatic waste paper Heavy Duty Baler.

    Secondly, regarding the appropriate use of the machine,and the intensity of the work load.Before purchasing a fully automatic waste paper Heavy Duty Baler,you should carefully understand its constituent materials,and the aging speed will vary with different materials.

    废纸.jpg

    We should have a detailed understanding of the automatic waste paper Heavy Duty Baler before purchasing.Nick produces a variety of waste paper Heavy Duty Baler models to meet your needs.

    If you are interested or have questions about the waste paper Heavy Duty Baler,please open our company's website: www.nickbaler.net,or call: 86-29-86031588


    20-09-30
  • With the gradual changes in our lives,no matter what kind of equipment,after a period of use,there will always be an aging state of the machine.

    In this case,our machines will be unusable,causing our property losses.

    Therefore,for the automatic waste paper Heavy Duty Baler,the maintenance of the automatic waste paper Heavy Duty Baler is also very important.Next,I will explain the aging problem of the automatic waste paper Heavy Duty Baler.

    First of all,the maintenance of the automatic waste paper Heavy Duty Baler often determines the service life of the machine itself and the efficiency of the machine.

    The automatic waste paper Heavy Duty Baler is also classified as a mechanical type,and its process requirements are relatively high,and its structural parts will be mass-produced after strict inspection.

    20200916_140156_012.jpg20200916_142304_019.jpg


    The irregular density of structural parts can also cause problems with hydraulic Heavy Duty Balers.

    For this,try to choose branded products when choosing a fully automatic waste paper Heavy Duty Baler.

    Secondly,regarding the appropriate use of the machine,and the intensity of the work load.Before purchasing a fully automatic waste paper Heavy Duty Baler,you should carefully understand its constituent materials,and the aging speed will vary with different materials.

    We should have a detailed understanding of the automatic waste paper Heavy Duty Baler before purchasing. Nick produces a variety of waste paper Heavy Duty Baler models to meet your needs.

    If you are interested or have questions about the waste paper Heavy Duty Baler,please open our company's website:www.nickbaler.net, or call: 86-29-86031588


    20-09-29
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top