News Center
our commitment to nickbaler
  • The waste paper Baling Machine is specially used for the recovery and compression of waste corrugated boxes,cardboard,newspapers and other materials,but sometimes it cannot work quickly.Do you know the reason?

    1.The air pressure of the waste paper Baling Machine oil pump is not as high as the flow demand.In order to prevent oil leakage,it is necessary for the waste paper Baling Machine to proceed with appropriate and tight inspections and tests before proceeding.

    2.If the safety valve of the waste paper Baling Machine is deformed in the light pressure Baling Machine,it will seriously affect the main valve core.The main valve core is blocked at the small opening,which will cause the pressure oil of the door source baling pump to overflow into the oil tank and make the baling oil.

    The flow of the waste paper Baling Machine into the actuator is greatly reduced,so the fuel supply schedule is slowed down.


    3.The front and rear drainage of the waste paper Baling Machine is serious.When working fast, it is easy to cause the wind pressure to be too low,but it far overwhelms the oil return circuit.When the piston ring seal of the oil cylinder of the waste paper Baling Machine is worn,both sides of the cylinder of the waste paper Baling Machine It is easy to cause a problem with excessive air leakage and cause oil leakage in the cylinder of the waste paper Baling Machine.

    The Nick brand waste paper Baling Machine is simple to operate and automatically discharges the bale,which improves work efficiency.The installation of emergency stop settings makes the operation safer and perfect after-sales.If you have more needs,please call: 86-29-86031588

  • The straw Baling Machine is a recycling and compression baling machine specially used for waste paper,waste cardboard,carton factory scraps,waste books,waste magazines,plastic film,straw and other loose materials.It can reduce the volume and facilitate transportation.

    So,how to maintain the straw Baling Machine?

    1.Before starting the machine,please inject 25 kg of gear oil(one time refueling can be used continuously for more than 10 years),and tighten the oil filler plug after refueling.

    2.Check the power lines carefully to prevent trouble spots and leakage,and ensure that the electrical level is safe.

    3.Carefully check whether the bolts and screws of the connecting parts of the machine motor and transmission parts can be consolidated and whether there is any looseness in order to fasten them in time.


    4.Set the preheating temperature according to the species.Corn and wheat stalks are between 80°C and 90°C,and peanut husks and rice husks are between 80°C and 100°C.

    5.After turning on the machine,run it idling for 1 minute,check whether the machine can rotate normally,and then feed a small amount of material when it is normal,and load the material evenly after the remaining material in the standby device is clean.

    6.Before loading,please pay attention to the hard sundries in the raw materials,and prevent stones and iron from entering the silo to avoid damage to the machine.

    7.It is necessary to add oil to the oil filling space on the universal joint every 8 hours of operation,and 2-3 drops of oil at a time are sufficient.Please load a little wet material before stopping,so that the material can be discharged smoothly after starting the next day.

    Nick brand straw Baling Machine has simple structure,small volume, simple daily operation and maintenance,convenient transportation and storage,continuous operation,high efficiency

  • When a product can meet our needs,its function must be affirmed,such as a plastic bottle packing machine,which can efficiently pack waste plastic bottles,greatly improving work efficiency,reducing labor intensity,saving manpower,and reducing transportation.Cost,then,we can say that the plastic bottle Baling Machine is a high-quality environmentally friendly tool for waste processing in the new era.

    In the process of recycling plastic bottles,handy packaging equipment is often inseparable. A small city produces hundreds of thousands of plastic bottle garbage every day.If it is pulled by a truck,there are four or five.In fact,the plastic bottles are large and piled too loosely.

    If a plastic bottle packer is used for compression and packaging,it can be easily loaded in a car,and the packaging efficiency of the plastic bottle packer is also quite high,which can process 6-20 tons of plastic bottle waste in one hour.


    The use of the plastic bottle packing machine makes the huge and messy beverage bottle stack particularly neat,compact,neat and beautiful,and it also greatly reduces the venue and transportation costs.The packed plastic bottles are of regular shape and neatly placed,which has a higher safety factor in storage and transportation.

    The emergence of plastic bottle Baling Machines has brought many benefits to our daily lives,especially in the recycling and reuse of resources.Plastic bottle Baling Machines can meet the demand for energy saving,and can provide more efficient resource services for the operation of agricultural and sideline products processing industries.

    Nick Baler high-end technology makes the plastic bottle packer more adapt to the development of the times and provide you with better services.

    If you are interested or have questions about the plastic bottle packing machine,please open our company's,or call:86-29-86031588

  • The waste paper Baling Machine is specially used for the recovery and compression of waste corrugated boxes,cardboard,newspapers and other materials.What is the cause of the noise?

    1.The power supply is reversed.Generally,if the new machine waste paper Baling Machine is noisy,it is mostly because the wires are connected reversely.If the wires are connected reversely,the motor will reverse,and the reverse will cause a lot of noise.The user only needs to exchange any two wires in the power supply.Okay.

    2.Chain grinding chain cover.The waste paper Baling Machine may cause the chain cover to deform due to accidental heavy collision during transportation or use.Once deformed,the chain will wear the chain cover, and a certain amount of noise will also be generated at this time.


    3.Motor failure.If the waste paper Baling Machine has been used for a very long time and there is a sudden abnormal noise,then it may be that the motor is faulty and needs to be repaired by professionals.

    The Nick brand waste paper Baling Machine is easy to operate,high in safety,automatic out of the package,and more efficient.It is your best choice

  • In daily life like tea packaging,powder packaging,liquid packaging,etc.,the packaging machine cannot be separated.Therefore,it can be said that the Baling Machine is very important to these industries,so how can the service life of the Baling Machine be extended in daily use?

    First of all,use tools when adjusting equipment and machines.They must be appropriate and special attention must be paid.Some waste paper Baling Machines that need to pack waste paper often need to adjust the size of the packaging volume according to different needs.It is recommended to pay attention to the relevant adjustment common sense before each adjustment.In normal operation,special attention should be paid to whether the machine is damaged,whether the random technical data is kept intact,and if any problems are found,timely maintenance is required.


    Secondly,in daily use,it is especially like a waste paper Baling Machine to keep it clean.It is recommended to simply clean at least once a day,and once a week.After each cleaning,inject clean and clean lubricating oil into all parts of the Baling Machine.

    In short,to extend the Baling Machine,it is necessary to start from the daily scientific use method,and only from the small details can it truly extend its service life.Nick brand automatic Baling Machine has simple structure,stable action,simple operation,low failure rate and easy cleaning and maintenance.It is a good helper for your production.

  • For a long time,foreign waste paper has been favored by many domestic paper mills due to its lower price and better quality.

    Affected by the increased environmental protection supervision,the reform of the paper supply side has accelerated,small and medium-sized enterprises have shut down due to high environmental pressures,and the industry is facing capacity shrinkage.Therefore,the prices of major paper products have risen across the board,and the performance of the sector has continued to improve.


    At the same time,industry concentration has increased and leading companies have gained more market share.Environmental protection is expected to become stricter in the second half of the year,and new capacity in the paper industry is limited.

    The centralized sorting and processing of waste paper bins is also helpful to promote the application of waste paper Baling Machines.Waste paper boxes,cartons,paper tube and paper shell waste,waste plastic bottles,mineral water bottle waste,plastic bag plastic film waste,etc.are all recyclable waste.The implementation of garbage classification will also increase the recycling volume of the surrounding major resource recycling stations to a certain extent.The waste paper Baling Machine will greatly improve the recycling efficiency of recyclable garbage and reduce the amount of labor,which will also be greatly affected.Small packing stations are welcome.


    The waste paper Baling Machine has become a source of basic power to promote the development and growth of enterprises.

    In addition,Nick Machinery has also established a complete service system to ensure that any mechanical failures encountered by users after purchase and during use can be resolved in a timely manner to ensure their own economic interests and achieve sustainable development.

    These development policies have further improved our reputation in the market and become a well-known brand of domestic waste paper Baling Machines.

Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top