After the hydraulic baler is finished running, pay attention to it when unwinding the belt. Must strictly follow the instructions on the accompanying instructions to operate. After the manual is finished, the Baler tape should be returned to the non-tape. This can reduce the time when the strap is stored in the storage box, and then reduce the arc mentioned above, reduce the degree of bending of the strap, and then reduce the probability of using the cassette of the hydraulic strapping machine. When the operator is carrying out the action of threading the hydraulic baler, the arc of the lead should be upward as much as possible.
We know that the straps on the straps present a circular loop. As the time is longer, the straps will naturally form a certain arc, and if this arc is larger, it will affect the straps in the belt to a certain extent. The degree of smoothness, especially the fully automatic baler with a high degree of automation, so the staff advocates to put the arc upwards as much as possible when putting on the belt.
The development trend of horizontal semi-automatic hydraulic baler
1. High speed and low energy consumption. Improve the working efficiency of hydraulic presses and reduce production costs.
2. Mechatronics and hydraulic integration. Make full use of mechanical and electronic technologies to promote the improvement of the entire hydraulic system.
3. Automation and intelligence. The rapid development of microelectronics technology provides sufficient conditions for the automation and intelligence of hydraulic presses. Automation is not only embodied in processing, it should be able to realize automatic diagnosis and adjustment of the system, and have the function of fault prevention.
4. The hydraulic components are integrated and standardized. The integrated hydraulic system reduces pipeline connections and effectively prevents leakage and pollution. Standardized components bring convenience to the maintenance of the machine.
If metal cutting chips cannot be handled properly, it will cause the following hazards:
1. The cutting oil consumption is large, and a large part of it is taken away by the metal cutting chips, which leads to waste
2. The cutting oil attached to the metal chips will drip and leak during storage and transportation, resulting in dirty, slippery ground (safety hazards) and environmental pollution
3. The content of cutting oil on metal chips will affect the quality and price of metal recycling
4. Since the reform and opening up, my country has vigorously developed heavy industry. A large amount of heavy metal ions are discharged into soil, lakes, rivers and other water bodies, and then into the ocean, seriously endangering human health and living environment.
1. The electrical working procedure of the iron filing briquetting machine
Start: Turn on the power, the power indicator light is on-press the motor start button, the contact is closed-AC contactor, the coil is energized, the contact is closed-the main contact is closed, and the motor is energized to start.
Stop: Press the motor stop button-the AC contactor coil is de-energized-the main contact is disconnected, and the motor stops when the power is cut off.
Iron chip briquetting machine generally has two motors. The starting and operating modes are star step-down starting and delta normal pressure operation. The starting operation control of the motor M2 is the same as that of Ml.
The power is turned on, the emergency stop button is in the closed state, the control circuit is energized, and the power indicator light is on, and the motor can be started at this time.
Press the emergency stop button, the normally closed contact of the contactor will be disconnected, the motor control circuit will be de-energized, and the power indicator will go out.
①The on and off of the motor power supply is controlled by the AC contactor, which can realize low voltage protection.
②Equipped with earth leakage protection device.
③A miniature circuit breaker with double protection of overload and short circuit is installed in the control circuit.
Nick Machinery is strictly controlled in accordance with the operation mode of the ISO9001 international quality management system, and the quality fully meets the requirements of economic industrial design. www.nickbaler.net
The maintenance of customer resources and accumulation of customer resources for waste paper balers are the work that every sales company must work hard to do. It is difficult to retain each customer. We must do our own products, which may be a word for customers. Scared away, how can hydraulic paper Baler manufacturers retain customers?
To make a good product, the so-called good product is the quality, the product that users trust. The automatic waste paper baler is a mechatronic product, mainly composed of mechanical systems, control management systems, feeding systems and power systems. The whole Baler process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving. The compression frame of the mineral water bottle Baler machine is basically similar in structure to the compression frame, but there are 4 Baler heads and 1 set of thread feeding device on it. The baling heads of the waste paper hydraulic baler (4 in total) are the parts of the whole equipment with complex structure and multiple actions. Each hydraulic baler of waste paper has exactly the same structure and can be interchanged. Such a product does not need to be advertised, it will naturally have a good reputation, and users are willing to buy it.
Secondly, there must be a good service. Many companies think that the Baler belt is not bad, and there is no after-sales service. There is no service in terms of service. In fact, service lies in many aspects of the entire sales, depending on whether you are diligent.
Third, not to deceive customers. Honesty and trustworthiness are the traditional virtues of the Chinese nation. However, in the process of doing business, many business personnel always have no margin in what they say in order to facilitate orders. This will cause customers to say no. If you lose the customer Yes, then the order was lost.
Through the different models of waste paper hydraulic baler, we can often learn different information from them, so that we have an understanding of the baler, then how to choose the model of the plastic bottle baler?
As an indispensable part of packaging equipment, plastic bottle balers have many types and different models. The information of these models can reflect the main categories and main technical parameters of their own plastic bottle balers. The waste paper baler is used to squeeze waste paper and similar products under normal conditions, and package them with special packaging tape to greatly reduce the volume, thereby reducing transportation volume, saving freight, and increasing benefits for enterprises.
Generally speaking, the ordinary type of plastic bottle Baler machine is mainly composed of two parts: the main model and the auxiliary model. Through these two signals, the information of most products can generally be reflected, for example, the series of plastic bottle Baler machines, plastic bottles There is a lot of information about the varieties of Baler machines and the specifications of plastic bottle Baler machines.
1. Through the main model, you can understand the main classification of the plastic bottle Baler, its structural characteristics, and the manufacturer's project code. For plastic bottle balers that do not have any classification, the classification and ranking of the equipment can be determined by its own nature. Its structure code and other project codes can be determined by our manufacturers according to the specifications of the product, all of which are very much At that time, the same Baler equipment had different names for different manufacturers.
2. The auxiliary model is mainly to remind us of the main parameters of the equipment, the order of derivation and the information of the design order, etc. Under normal circumstances, the main parameters are represented by numbers, and generally take their and limit values; if more than two parameters need to be marked at the same time, they need to be separated by slashes. The main parameters commonly used in Baler scale products mainly include filling volume, size, and production capacity, etc. The derivation order is generally distinguished by Roman characters, while the design order will be displayed in English letters. Generally, the first product does not have a sequence code.
The straw briquetting machine is used to make new fuels and industries that are more popular in the production of feed. The fuel produced is used to replace coal, oil, natural gas and other energy sources, and is used in heating, industry, clothing production and other industries to produce feed. Because of its high nutritional value and easy storage, it is very popular and used by farmers. However, the straw briquetting machine looks simple in appearance, and the actual working principle is not as simple as imagined. Those who want to master the straw briquetting machine quickly and clearly The working principle also has a knack.
The working principle of the straw briquetting machine is: the equipment feeds the raw materials to be processed uniformly and continuously into the cavity enclosed between the ring die and the pressure roller of the straw briquetting machine through the feeding hopper and the screw feeding device. In the body, the raw materials are gradually brought into the gap between the ring die and the pressure roller under the force generated by the mutual movement of the ring die and the pressure roller. With the increase of the extrusion force, the bonding force between the materials increases and is squeezed into the ring die. In the hole, when the extrusion force is increased to overcome the frictional resistance of the die hole to the material, it is continuously extruded from the ring die hole in a strip shape. When extruding, the material is cut into blocks of appropriate length by the slices on the shell of the machine body. The size of the finished product processed is determined by controlling the aperture size of the die configured by the ring die, and the length of the finished product processed by the straw briquetting machine can be controlled by the distance between the cutter and the die hole.
The working principle of the straw briquetting machine is simple and easy to understand, and the operation is not a difficult problem. There are many types of raw materials that can be processed by the straw briquetting machine. Due to the different properties of the processed raw materials, the finished products are processed. The performance is different, and the benefits when used for fuel and feed are also different.
The machines produced by Nick Machinery have the characteristics of many varieties, complete specifications and strong compatibility. And can be designed and manufactured according to customer requirements. www.nickbaler.net