News Center
our commitment to nickbaler
  • Proper use of machinery and equipment, careful implementation of maintenance systems and strict compliance with safe operating procedures are necessary conditions for extending the life of the machine, improving production efficiency and ensuring safe production. To this end, it is recommended that users establish maintenance and safe operation procedures. Operators should be familiar with the machine structure and operating procedures, and must also pay attention to the following points:

    (1) High-quality anti-wear hydraulic oil should be strictly used in the hydraulic oil added to the oil tank, must be strictly filtered, and should always maintain a sufficient amount of oil, and should be filled with oil immediately when insufficient. The waste paper packer is used to squeeze the waste paper and similar products under normal conditions, and pack it with special packaging tape to form it, which greatly reduces its volume, so as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises. Introduced advanced technology and advanced technology of similar products at home and abroad.

    662740243389905709.jpg

    (2) The oil tank should be cleaned and replaced with new oil once every six months, but the filtered oil should not be washed for more than one month for the first time. The used new oil is allowed to be used again after strict filtration.

    (3) The lubricating parts of the machine should be filled with lubricant at least once per shift as required.

    (4) The debris in the bin should be cleaned in time.

    (5) Without learning, those who do not understand the structure, performance and operation rules of the machine shall not start the machine without permission. The waste paper packer is used to squeeze the waste paper and similar products under normal conditions, and pack it with special packaging tape to form it, which greatly reduces its volume, so as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises. Introduced advanced technology and advanced technology of similar products at home and abroad.

    (6) When the machine has serious oil leakage or abnormal phenomena in the work, it should be stopped immediately to analyze the cause and eliminate the fault, and it must not be forced to run with disease.

    (7) During the operation of the machine, it is not allowed to repair or touch the moving parts, and it is strictly forbidden to press the materials in the bin with hands or feet. With the growing awareness of environmental protection, the waste paper baler has played a big role. It can reuse some waste paper, and it is more and more accepted by everyone. Domestic waste paper baler has been It is constantly innovating and following the development of some advanced technologies abroad.

    (8) The adjustment of pumps, valves and pressure gauges must be carried out by experienced technical workers. If the pressure gauge is found to be faulty, it should be checked or updated immediately.

    (9) The user should formulate detailed maintenance, maintenance and safe operation control rules according to the specific situation.as more information ,please visit :www.nickbaler.net

    20-04-24
  • Over the years, the baler industry has developed, and automatic / semi-automatic baler, waste paper baler, vertical waste paper baler, straw baler and other equipment have been reached, and the automatic waste paper hydraulic baler industry is still in short supply. There is still a big market waiting to be developed, which shows that the automatic waste paper hydraulic baler machinery industry has better prospects. With the growing awareness of environmental protection, the waste paper baler has played a big role. It can reuse some waste paper, and it is more and more accepted by everyone. Domestic waste paper baler has been It is constantly innovating and following the development of some advanced technologies abroad.

    A good quality product requires our efforts to build, is committed to the research and development and production of automatic waste paper hydraulic baler machinery, and has been recognized by users. It will maintain its original intention, keep improving, and strive to do well and continue to build Be your own tomorrow and work hard for tomorrow. Mineral water bottle packing machine This product has the characteristics of good rigidity and stability, beautiful appearance, easy operation and maintenance, safety and energy saving, low investment cost of equipment basic engineering and so on. It is widely used in various types of waste paper mills, old waste recycling companies and other unit enterprises. It is suitable for packaging and recycling of old waste paper and plastic straws. It is a good equipment for improving labor efficiency, reducing labor intensity, saving manpower, and reducing transportation costs. as more information ,please visit : www.nickbaler.net

    IMG_0880.JPG

    20-04-10
  • Hydraulic Nick Baler Waste paper Baling Machine introduces equipment maintenance methods. Hydraulic Nick Baler Waste paper Baling Machine is easy to operate and is accepted by more and more companies. However, as the packer is continuously used every day, even the best products have a period of use.

    In addition to the quality of Nick Baler Waste Paper Baling Machine itself, how to increase the life of Nick Baler Waste Paper Baling Machine and reduce the failure rate as much as possible, so that it can play a high utilization value has become a concern of many enterprises.

    The following is the maintenance and maintenance of hydraulic Nick Baler Waste paper Baling Machine.

     How much do you know about the advantages of Nick Baler Waste paper Baling Machine equipment? According to the prospect of progress in the times, technological products are also constantly developing. If you have used it, you must know how many advantages of Nick Baler Waste paper Baling Machine. If you have never used it, then you can just consider it. I started to like Nick Baler Waste paper Baling Machine.

    mmexport1525170858847.jpg

       1. It is recommended to install an oil-water separator, the air source is dry: the general air source is relatively humid, the hydraulic Nick Baler Waste paper Baling Machine will cause unstable performance due to the entry of moisture, and will cause damage in the long run. Before use, the oil storage of the oil-water separator oil storage tank should be at least 2/3, and the water in the water storage tank should be drained regularly.

       2. The choice of Nick Baler Waste paper Baling Machine is also very important, the inner diameter is generally 8-10mm; the length of the trachea is generally not more than 15-20m. Fully automatic Nick Baler Waste paper Baling Machine is an electromechanical integration product, mainly composed of mechanical system, control system, feeding system and power system. The whole packaging process is composed of auxiliary time such as pressing, returning, lifting, transferring, ascending, ascending, and receiving. If the trachea is too long, consider adding a booster device in the middle, which will affect the performance of the baler equipment.

       3. Before each operation of the baler, please take a few minutes to check whether the air source is working properly and the hydraulic pressure is stable. The air pressure of the baler is preferably 0.7MPa.

       4. When using, adjust whether the baler's pulling force can be determined by the sound when the baler is working. Nick Baler Waste paper Baling Machine With the increasing awareness of environmental protection, Nick Baler Waste paper Baling Machine has played a big role. It can reuse some waste paper and is more and more accepted by everyone. Domestic Nick Baler Waste paper Baling Machine has been constantly innovating and following the development of some advanced technologies abroad. The louder the sound, the stronger the pull, and vice versa.

       5. To develop the good habit of diligently adding lubricating oil, according to the frequency of use of the baler, regularly add appropriate amount of lubricating oil to the air inlet of the baler to reduce wear.

       6. After working for a long time, you should use a wire brush to clean the broken plastic belt on the tightening wheel and the anti-slip plate.

       7. After the work is completed or during non-working hours, the air source is turned off. Misoperation control will cause the baler to run without belt, resulting in wear of wearing parts.

       8. When Nick Baler Waste paper Baling Machine fails, please ask after-sales personnel or experienced personnel to disassemble and repair it.

    Nick Baler Waste paper Baling Machine is simple to operate. Because there is no need for manual operation in the entire operation process, that is, the entire workflow can be completed by the operation of buttons. So there will be no accidents due to some temporary machine failure during operation. You can decide the size of Nick Baler Waste paper Baling Machine yourself.for information ,please visit :www.nickbaler.net 

    20-04-07
  • Talking about the matters needing attention in the process of installing the hydraulic oil pump of the waste paper baler


    The waste paper baler has the characteristics of good rigidity, toughness, beautiful appearance, convenient operation and maintenance, energy saving, and low investment cost of equipment basic engineering. It is widely used in various types of waste paper mills, used materials recycling companies and other unit enterprises. It is suitable for the packaging and recycling of used waste paper and plastic straws. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.

    DSCN0494 拷贝.jpg

    Matters needing attention in the process of installing the waste paper baler hydraulic oil pump:

    1. The installation height, length and pipe diameter of the suction pipe of the oil pump should meet the calculated values, and strive to be short and reduce losses (such as elbows, etc.); and ensure that the pump does not exceed its allowable cavitation margin during operation. The inner diameter of the suction pipe should not be less than the specified requirements, the suction pipe should not be too long, the bend at 90 degrees should not exceed two, and it is connected to the oil pump inlet with a soft short connection.

    2. The installation of the oil pump has a very important impact on the smooth operation and service life of the pump, so the installation and calibration work should be carried out carefully, and must not be rash. The support or base of the hydraulic pump must be strong and firm, and the pump shaft of the hydraulic pump must be well aligned with the motor.

    3. The place where the oil pump is installed should be wide enough to facilitate the maintenance work.

    4. The suction and discharge pipes of the oil pump should have brackets, which are not allowed to bear the load of the pipes.for moe information ,please note nick baler : www.nickbaler,net 


    20-03-31
  • Using the brand packer technology, it is designed to have dual circuit control of the whole machine, which is more stable and reliable than the previous single circuit control. The dual circuit control reduces the internal load of the machine's electrical board, and the operation of each circuit of the packer structure is smoother and more stable.

    So what are the requirements for the use of Hydraulic baler oil by the baler?

    1. In areas where fire protection is required, the Hydraulic baler oil's rich ignition point should be high; in cold climate areas, the Hydraulic baler oil's freezing point should be low.

    DSCN0493 拷贝.jpg

    2. The Hydraulic baler oil should not be easy to oxidize, avoid colloid and asphaltene due to oxidation, and make the Hydraulic baler oil degenerate. Oxide impurities can also block the Hydraulic baler oil circuit and damage the normal operation of the hydraulic system.

    3. It has no effect on human health.

    4, clean quality, no impurities. If there is moisture, it will reduce the smooth function of the straw baler Hydraulic baler oil; there are mechanical impurities that will block the orifices and the valve core jam; acid and alkali will corrode the metal and damage the seal structure; there will be volatile substances that will change the Hydraulic baler oil Thick and air bubbles occur, which damages the smoothness of the transmission.

    5, has outstanding smooth function. In the hydraulic system of the baler, the working fluid is not only used to transfer energy, but also has a smooth effect on the conflicting surfaces of the hydraulic components. In some machine tools, the Hydraulic baler oil source for the smooth system of the machine tool comes from the hydraulic system, and the hydraulic system uses the same Hydraulic baler oil pump to supply Hydraulic baler oil. Therefore, hydraulic Hydraulic baler oil should have high Hydraulic baler oil film strength and outstanding smooth function within the operating temperature and pressure change scale to avoid dry conflicts.as more information ,please visit us : www.nickbaler.net.


    20-03-31
  • (As more and more companies use waste paper hydraulic balers, the standard for operating waste paper hydraulic balers has also become a growing concern). Mineral water bottle baler This product has good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in various types of waste paper mills, used materials recycling companies and other unit enterprises. It is suitable for the packaging and recycling of used waste paper and plastic straws. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. The waste paper packing machine is used to squeeze and solidify waste paper and similar products under normal conditions, and use special packaging tape to pack and shape, so that its volume is greatly reduced, so as to reduce the volume of transportation, save freight, and increase benefits for the enterprise. Introduced advanced technology and advanced technology of similar products at home and abroad. With the increasing awareness of environmental protection, the waste paper baler has played a great role. It can reuse some waste paper and it is more and more accepted by everyone. The domestic waste paper baler has been In continuous innovation, we are constantly following the development of some advanced technologies abroad. It's about the safety of the company and the workers themselves

    1. Before using the waste paper baling machine, wear working clothes strictly according to the company's system, fasten the cuffs and fasten the buttons to prevent accidents caused by the waste paper baling machine bringing clothes into the machine.

     2. The operators of the baler should be trained before taking up the job, familiar with the structure, performance and use of various parts of the waste paper baler!

    DSCN0497 拷贝.jpg

    3. Before the packing machine is operated, it is necessary to clean the site and clean the oil and debris on the fully automatic waste paper packing machine.

    4. The baling machine must be powered off when performing maintenance and repairs, and it is forbidden to bump the start button and handle!

    5. Before using the baling machine, perform an idle check to check whether there is noise, whether the fuel tank fluid level is sufficient, and whether there is looseness in various parts, etc.

    6. It is strictly forbidden to extend the limb into the working part of the equipment when the baling machine is working, so as not to cause harm to the human body!

    7. It is strictly forbidden to disassemble the parts of the baler randomly. If the equipment fails, please contact the professional maintenance staff for troubleshooting.


    20-03-31
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top