We need to know what the material need to be pressed first when you need us support you to choose a baler, our fully automatic horizontal baler can work on below materials, we need to design baler for you on different material because different force is required on different material and the density is also varied by materials.
Our Automatic Horizontal Baling Press Machine can work on these material: Aluminum Alloy Frame, Aluminum can, Cardboard( OCC,Carton), Cellulose Fiber, Chopped straw/Hay, Coco Peat, Foam(Sponge), Disposable Tableware, Hollow Plastic(PET Bottle,HDPE Jar,PP Container).
Full Automatic Balers with Cyclone for Packaging Plants
Specially used for recycling waste paper, cartons/cardboards trims/scraps etc. which are popular in packaging/corrugation industrial, paper/ printing plants etc.
1.The host frame system: More high quality steel gas shielded welding casting solid framework, advanced mechanical design makes equipment durability.
2. Conveying system:High quality thickening flange beam frame, high strength steel plate type transmission belt.
3. Hydraulic System : Hydraulic pump, solenoid valve, key parts adopt imported components and hydraulic cylinder oil seal, packing pressure, fast, durable, low noise.
4.Electric control system: Using Siemens motor, original mitsubishi PLC programming controller.
5.Other buttons, sensors, infrared correlation, such as remote control system for the key parts adopt imported components, key operation simple and convenient maintenance.
6.Security alarm system:Program control five safety automatic lock down alarm. In the equipment misuse, lack of power supply, power phase sequence error, high pressure, people stray into the mouth when the automatic shutdown alarm.
NKW100Q Scrap Paper Recycling Baler Press
Scrap Kraft paper, Carton, Cardboard ,Soft Film
Feed opening size
Main motor power
Main cylinder force
Max. systemworking force
About 17 tons
Tie wire line
4 line φ2.75～φ3.0mm3 iron wire
≤30S/ (go and back)
Chain conveyor technology
About 9 tons
terra hole size
With the increasing use of waste paper baler machinery, the frequency of use has gradually increased. However, there are still some people who may not know the waste paper baler very well. Some people even think that the waste paper baler is a waste paper recycling machine. Some people even think that it is the evolution of the waste paper basket. In fact, this is not the case. The waste paper baler is actually an existence for more convenient recycling of waste paper. The waste paper baler can compress and integrate waste paper to facilitate recycling and transportation.
People's awareness of environmental protection is getting stronger and stronger, and environmental problems are becoming more and more serious. Every one of us citizens should fulfill their environmental protection obligations and contribute to environmental protection. Therefore, under the background of environmental protection, the waste paper baler came into being and was well received. Our waste paper packaging technology is not particularly perfect, but we are also following in the footsteps of foreign advanced technology, and we are constantly innovating and improving.
The waste paper baler can pack some waste paper for recycling and reuse, which is mainly suitable for some large paper mills or large users of paper products. And the waste paper baler can also recycle old things such as plastic straws.
The application of waste paper baler greatly reduces the loss of manpower and material resources, and is convenient and fast, simple to use, and large-area waste paper baling and recycling is of great significance to environmental protection and avoiding waste.
The cleaning operation of the hydraulic system inside the waste paper baler is very important to the baler, because the waste paper baler needs a good hydraulic system when working. Therefore, in daily work, the cleaning of the baler should not be underestimated and must be taken seriously. Below, let's take a look at the precautions for cleaning the waste paper baler:
When cleaning the waste paper baler, a low-viscosity special cleaning oil should be used. The clean oil is added to the fuel tank of the waste paper baler and heated to 50-80 degrees Celsius. Start the hydraulic pump and let it run dry. When cleaning the baler, you must often knock on the tube. This can remove the attachments. Clean for about 20 minutes. Check the contamination status of the oil filter, and clean the filter, and then clean it again. Repeat until there are not many contaminants on the filter. It’s okay when it’s time.
The cleaning time of waste paper baler is generally 2 hours. For the more messy hydraulic system, each area can be cleaned according to the work area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate to clean the system.
After cleaning, the clean oil must be drained, and the inside of the oil tank must be cleaned. When the waste paper baler system is restored to the normal operating state, add the specified hydraulic oil.
After years of development, waste paper baler has formed a considerable scale, although the scale of development of my country's baler industry has been very large. Nowadays, the development of all walks of life is inseparable from innovation. If the vertical waste paper baler can be developed in terms of technological innovation, at the same time in response to the call of the country, it will also bring more economy to the vertical waste paper baler equipment enterprises. interest.
The new technology of vertical waste paper baler can increase the output of equipment. Although my country's waste paper baler industry has developed so fast in the past two years and the export volume has increased significantly, it is undeniable that there are still many shortcomings in the vertical waste paper baler.
If these problems are not improved in a short time, it will inevitably affect the development of the baler industry and the position of the vertical waste paper baler in the baler industry. The concentration of my country's baler industry is not enough, production capacity is scattered, and economies of scale cannot be formed. At present, the production capacity of the vertical waste paper baler has developed rapidly, but the technological progress of the industry is relatively slow, and the R&D and innovation capabilities are low. The service life and reliability of the vertical waste paper baler have gradually been unable to meet the needs of technological development. Therefore, technological innovation is urgently needed.
The vertical waste paper baler is currently still stuck on capacity expansion, which makes China's baler industry lack a certain brand effect. Therefore, in terms of technological innovation of vertical waste paper baler, we must increase efforts to make contributions to my country's baler industry.
The quality of the vertical waste paper baler is inseparable from the oil cylinder, and the function of the oil cylinder determines the stability of the baler. Similarly, the quality of hydraulic oil also affects the failure rate and service life of the cylinder. The cylinder needs to use No. 46 anti-wear hydraulic oil to ensure the efficient production of the baler.
In the current baler industry, many small manufacturers are reluctant to develop and research new products, and will blindly imitate the products of large baler manufacturers. This is also an important factor leading to the slow development of the waste paper baler market.
With the management philosophy of "Integrity creates the brand, and quality determines the future", Nick Machinery continues to improve the mechanism, strengthen brand awareness, and make products with excellent quality and better after-sales service. www.nickbaler.net
The hydraulic baler has strong flexibility. The hydraulic baler can be driven by a diesel engine. It is equipped with wheels below for easy movement, so the flexibility is better. This is also one of the reasons for the high sales. This machine is mainly used for straw processing. Processing, the following analysis of its practicality:
First of all, in terms of objective factors, there will be a large amount of straw after the harvest of crops every year, and the straw baler can be combined with the silk rolling machine, shredder, etc. to carry out in-depth processing of it, to achieve full utilization of waste resources, and the entire production The process is noise-free and pollution-free, and meets the requirements of energy-saving and environmentally friendly social development.
NICKBALER hydraulic straw baler can turn a lot of green garbage into treasure, protect the environment, increase the utilization rate of rural soil, and conform to the concept of environmental protection. www.nickbaler.net
Generally speaking, for waste paper hydraulic balers, if you want to use them well, you must first know the composition of the equipment and the principle and characteristics of the waste paper hydraulic balers. These are the most basic and most important.
The balers currently sold can be roughly divided into two types, the vertical waste paper hydraulic baler and the horizontal waste paper hydraulic baler. The horizontal waste paper hydraulic baler is larger than the vertical machine, but its compression force is also larger than that of the vertical baler, the size of the baler is relatively large, the power of the bale is high, and it can complete self-motion.
The working principle of the waste paper hydraulic baler is simple and automatic operation, which can increase the total power of the baler and save the labor cost of the baler. The bullet-proof door structure of European and American standards can protect the safety of the operator with maximum efficiency. The emergency button is installed separately and the location is eye-catching, which makes the operation of the machine safer.
Many people may be more concerned about the market for waste paper balers, but now with the rise in the price of materials manufactured by the baler, the price of waste paper balers is also constantly fluctuating. The quality of the waste paper baler is the quality. Many machines look the same, but the difference of a screw will affect the service life and use effect of a machine.
With the development of science and technology, people nowadays pay more and more attention to environmental protection. Today's society advocates the recycling of waste products, especially waste paper and waste plastics, such as beverage bottles after drinking beverages, and waste paper after office work. Those that can be recycled and discarded not only affect the environment, but also fail to achieve the degree of utilization of the items. In most waste recycling stations, waste paper balers are used, and the baler helps a lot when transporting the waste to the recycling site. It also provides a lot of convenience for our lives.
The waste paper baler maintains the environment with the early autumn to create a high and refreshing climate. Many people's views on waste recycling outlets are: pollution, noise, and smell. In fact, don't underestimate this waste recycling station. Only by its existence can clean streets and a comfortable environment. Many kinds of waste products can be recycled. In the waste cardboard packaging processing area, the baler packs and compresses the waste cardboard piled into hills into blocks, which not only reduces environmental pollution, but also facilitates transportation.
In the waste plastic recycling area, waste plastic bottles are divided into industrial plastics and food plastics after they arrive here, and they are sorted, cleaned, dried, and packaged before being transported to different plastic manufacturers. More and more balers have indeed brought a lot of convenience to our environmental protection.
The metal briquetting machine is fully hydraulically controlled, and the electrical main control part adopts PLC control, and the whole working process can realize automatic operation. The system is equipped with a manual working program, which is convenient for the adjustment of forward, backward, mold opening, and mold closing actions. The equipment is equipped with one-time and two-time feeding procedures to facilitate the pressing of metals of different shapes and sizes. According to customer requirements, automatic feeding and discharging devices can be added.
There are some precision parts in the hydraulic transmission system of the metal briquetting press. The operator feels convenient and labor-saving for the hydraulic transmission of the machine. However, its disadvantage is that it is quite easy to damage. The reason can not be analyzed is that it is not clear about its structural characteristics and working principle, so it is not known how to prevent and maintain it.
The hydraulic system of the metal briquetting machine has three factors: air ingress, pollution, and overheating. These three factors are all very bad. There is a close internal connection between them, and the connection is relatively strong. If there is a problem on any one side, another one or more problems will occur together. Through long-term practice, it has been concluded that 75% of the causes of diseases in hydraulic systems have a lot to do with these three aspects. One is overheating; two, the working fluid is deteriorated due to the dirt entering; third, it enters the air.
Solution: The assembly and cleaning of some main precision parts in the system must be carried out in a very clean room. Closed doors and windows, clean floors, and good room temperature are all indispensable factors indoors.
What will happen to the cans we drank? Random disposal will not only pollute the environment, but also waste resources. It is undoubtedly a good way to press it into shape and reuse it. Due to the recent increase in iron prices, the automatic aluminum can balers are in hot sales, and the products are in short supply. Below we will briefly introduce the structure and performance of the equipment.
The aluminum can baler produced by our company is a high-density baler, which has the advantages of convenient operation, safety and reliability, accurate positioning, compact structure, and small footprint.
Why do more and more companies choose aluminum can balers, because:
1. The price of steel has rebounded, and the price of cans after packaging and compression is higher than that before compression;
2. The equipment has a high degree of automation, and only one person can complete the production;
3. The equipment is under high pressure and the finished product has high density. Whether it is steelmaking or casting, it can reduce production costs, and there will be no slag drop or break during transportation;
4. In addition to compressing cans, this equipment can also compress hard plastics, sponges, fibers and other items, with a wide range of applications.