Product Application
our commitment to nickbaler
  • Laos metal shearing machine market advantage
    Laos metal shearing machine market advantage

    We all know that mineral resources are finite and non-renewable. Coupled with continuous development for a long time, these resources will become less and less. The regeneration of scrap metal resources is an inevitable phenomenon. In addition, the improvement of people’s living standards, every family’s car, Motorcycles and electric vehicles have greatly increased the demand for metal and the large amount of scrap metal produced. The scrap metal recycling market is getting bigger and bigger, and the demand for metal shears for corresponding dismantling equipment has also continued to rise.

    The metal shearing machine adopts electro-hydraulic control, simple operation, and can realize automatic point and linkage cycle. It is an ideal equipment for foundry workshops, scrap metal recycling industry and charge processing. It has powerful functions, fast speed, good performance, compact structure, and no Requires foundation, stable mechanical properties and other characteristics.

    The metal shearing machine can perform cold shearing of various metal structures such as scrap car iron sheets, hydraulic oil drums, refrigerator iron sheets, TV casings, angle steels, channel steels, etc., and process them into qualified charge.

    The recycling and reuse of scrap metal is an important part of building a new resource-based society. It is also a good steelmaking charge. It not only increases the consumption of old metals, but also effectively reduces the mining of mineral resources and waste discharge.

    IMGP1369 拷贝.jpg


    鳄鱼式剪切机,+鳄鱼式液压金属剪切机 拷贝.jpg


    shear machine 2 拷贝.jpg


    P1000149 拷贝.jpg


    More
  • Working principle of New Zealand gantry shears
    Working principle of New Zealand gantry shears

    The working principle of gantry shears:

    1. Work with the power generated by the hydraulic pump carried by the motor

    The hydraulic gantry shears rely on the action of the voltage pump to make the oil enter the cylinder of the machine body through the pipeline, and then the interacting parts in the cylinder cooperate to expose the oil cloth, and the one-way valve makes the oil circulate in the oil tank, which is also working A simple hydraulic system, through dynamics, enables the machine itself to run and work on its own during operation.

    2. Energy conversion device

    The hydraulic gantry shear is to make the hydraulic pressure pump and the hydraulic motor work through the conversion of energy. These two different devices operate in the opposite direction, and they will generate pressure and output the speed. These devices are usually positive displacement devices. Yes, the hydraulic motor converts pressure into machinery in the system actuator. This is what we often call the conversion of pressure energy and mechanical energy in physics.

    3. Interaction of check valve and relief valve

    Gantry shears use a simple one-way valve to make the oil flow above or below the cylinder. Under the action of high temperature, the cylinder is automatically operated. In this way, the liquid machine uses liquid to transfer perseverance, and the overflow valve is to avoid excessive system pressure to achieve timely unloading function.

    龙门剪4.jpg龙门剪5.jpg


    More
  • Nepal gantry shearing machine purchase
    Nepal gantry shearing machine purchase

    Selection criteria for gantry shears:

    1. If the price of the gantry shearing machine is lower than the average price of the industry, then the buyer should be alert. The too low price does not mean low profit, but low cost, and low cost will directly Affects the life and use effect of the gantry shears, and even implies that the company will not invest too much in after-sales and R&D.

    2. Don't cut the price with the manufacturer when you come up. You must first ask about the specifications, whether it is suitable for your own use, and then consult other gantry shear manufacturers with the same specifications and models. The price will always rank second and first. It is the specifications and models of the metal shearing machine, after-sales service and the manufacturer's commitment.

    The manufacturer of the NICKBALER gantry shearing machine recommends that you also pay attention to the details of the manufacturer in addition to the price of the equipment, so as to avoid worries.

    龙门剪2.jpg龙门剪1.jpg


    More
  • How to control the heating of hydraulic metal baler
    How to control the heating of hydraulic metal baler

    The hydraulic oil of the normal temperature hydraulic metal baler should be controlled within 60℃ in the coming summer. With the gradual increase in temperature, the temperature of the hydraulic metal baler of the hydraulic oil will increase. When it reaches 80 degrees or more, because of the different thermal expansion coefficients, the relative gap between the operating components and the movement of the hydraulic components will cause abnormal changes in oil temperature. When the oil temperature exceeds 60 degrees, the viscosity of the oil will decrease, the leakage will increase, and the sliding part of the oil film will be destroyed, which will increase the wear of the hydraulic components and accelerate the temperature rise. Large gaps increase oil leakage; gaps become smaller, and there may be a phenomenon of "death" between the components, which are unable to move the machine, and the thermal deformation caused by the destruction of the original accuracy.

    In view of the high temperature of the hydraulic baler, the following measures can be taken:

    1. Strengthen the regular inspection of hydraulic components, motors and pumps, and replace them immediately if they are found to be damaged. A good motor and oil pump can effectively reduce the temperature of the hydraulic oil.

    2. Appropriately reduce the working pressure of the hydraulic station system to avoid overloading of the equipment system with excessive pressure, so that the pump and valve group through the hydraulic oil can effectively reduce the friction and lower the temperature.

    3. Increase the hydraulic oil cooler air cooling and water cooling. These two heat dissipation devices are added to the oil tank of the metal baler, which can effectively reduce the high temperature of the hydraulic oil.

    c297af619f30cf4a9108a21332ac0a99 拷贝.jpg金属机 拷贝.jpg
    mmexport1492234423664 拷贝.jpg1-2废纸 (2).jpg


    More
  • Metal briquetting machine for processing scrap metal
    Metal briquetting machine for processing scrap metal

    Waste recycling and reuse is a hot topic discussed in the current society. It includes cans, scrap bicycles and motorcycles, scrap aluminum, etc., industrial scrap metal, scrap steel, scrap iron, light and thin materials, etc. Some of them can be recycled. Some of them cannot be recycled. Take the most common scrap metal among them, it is re-recycling resources. So what is the use of scrap metal after being processed by a metal briquetting machine?

    The metal briquetting machine is a kind of mechanical equipment that can recycle scrap metal resources for briquetting and packaging. Anyone who knows this industry knows that the cost of recycling scrap metal on the market is very low. After the metal briquetting machine is used for briquetting and packaging Later, it will become a cuboid or cylinder. In addition, these scrap metal sales channels after briquetting and packaging are also very good. Not only are they convenient for transportation, they can also be sent directly to steel mills for recycling.

    Nick Machinery's scrap metal briquetting machine is suitable for steel mills, recycling and processing industries, and non-ferrous and ferrous metal smelting industries. Various metal scraps, steel shavings, scrap steel, scrap aluminum, scrap copper, etc. can be extruded into rectangular, cylindrical, octagonal, and other shapes of qualified charge to reduce transportation and smelting costs.

    484053 拷贝.jpg2 拷贝.jpg
    123 拷贝.jpgghs 拷贝.jpg


    More
  • How to choose gantry scissors machine
    How to choose gantry scissors machine

    How do you choose gantry scissors? Here are some tips for you!

    First of all, gantry shears are divided into automatic and manual. Manual equipment is relatively cheap, but automatic equipment has higher work efficiency and processing quality, which can reduce labor costs, so automatic gantry shears are more popular.

    Secondly, choose equipment with wide applicability. The materials to be processed by gantry shears are various. When choosing gantry, you should see whether the equipment is suitable for processing various metals. If it is more applicable, it will be more applicable. Convenience.

    Finally, choose equipment of big brands, with high quality and guaranteed quality.

    剪贴机12.jpg剪贴2.jpg


    More
  • Precautions of metal cake press
    Precautions of metal cake press

    1. Frequently check the condition of the equipment cylinder, if the cylinder piston is not clean, clean it up in time.

    2. The hydraulic oil used in the oil tank must be kept clear and free of impurities, and the hydraulic oil must be replaced after a period of time.

    3. The speed of the oil pump must be controlled well, and the pressure cannot be increased too quickly or too strongly, or the hydraulic system will be subject to a huge impact, which will affect the performance of the equipment.

    4. The handle of the operating oil pump is suitable, and it cannot be lengthened or swayed.

    5. The safety valve cannot be disassembled at will, and the spring cannot be adjusted at will. In order to avoid pipeline safety risks.

    6. Check the working condition of the metal cake press frequently. If there are any abnormal parts, pay attention to repair or replacement.

    Finally, if the metal cake press is not used for a long time, wipe it clean and store it in a well-ventilated environment. 

    metal baler 22.jpgmetal baler 2.jpgmetal baler 13.jpg


    More
  • The advantages of hydraulic gantry shears
    The advantages of hydraulic gantry shears

    Now the new type of gantry shears are hydraulically driven, the advantages of hydraulic gantry shears are very prominent, mainly reflected in the following aspects.

    1. Superior performance, stable cutting with gantry shears, fast cutting speed, and no noise, it is a very good equipment.

    2. The gantry shears are easy to install and operate, and it does not require any foundation. You can use the gantry shears immediately after a simple training.

    3. The gantry shear has a wide range of applications, and it is easy to control no matter what material it is cutting. For example, all kinds of scrap steel plates, ferroalloys, etc., can be cut with gantry shears.

    4. Longmen scissors are environmentally friendly products. Modern people pay great attention to environmental protection, and longmen scissors will not produce pollution during use. This not only meets the needs of environmental protection development, but also improves social and economic benefits.

    In short, gantry shears have superior performance and are worth choosing. 

    metal shearing machine11.jpgmetal shearing machine 4.jpg


    More
  • The characteristics of the metal baler
    The characteristics of the metal baler

    Metal balers are mainly used in steel mills, recycling industries, and non-ferrous and ferrous metal smelting industries.

    The metal baler is hydraulically driven. Of course, you can choose manual operation or PLC automatic operation. There are many ways to unload the package, you can choose to turn the package, push the side, push the package, and of course, you can also choose to take the package manually. .

    At present, there are a variety of metal baler models on the market. Customers can choose a more suitable model according to their own needs. If there is no power supply in the place where they are used, they can choose a diesel engine for power.

    metal baler 1.jpgmetal baler 3.jpgmetal baler 10.jpg


    More
  • Metal baler can fundamentally save costs
    Metal baler can fundamentally save costs

    From a big point of view, only one-time purchase is required, and the packaging work can be completed efficiently by consuming electric power. This way, a piece of equipment can not only replace multiple labor costs, but also ensure the quality and speed of packaging. Every worker is at the speed of a metal baler, so this kind of equipment is really a good helper for the company and can save most of the cost.

    From a small point of view, such equipment does not occupy a large area, and it is very convenient to use a conveyor belt to connect to other equipment. After a year, the total output value will definitely double or even double.

    金属20.jpg金属2.jpg


    More
  • Metal baler rebirth metal scraps
    Metal baler rebirth metal scraps

    In particular, many companies have also applied briquetting machines to the use of scrap metal slag, allowing the scrap metal slag to be reused.

    The sources of metal shavings are very wide. When people are dealing with some metal materials, they will produce a lot of metal shavings. In the past, we could only throw them away, which was very wasteful. It can be said that neglecting the recycling and reuse of scrap metal slag not only causes a waste of resources, but also produces a lot of pollution to the environment.

    With the continuous development of science and technology, we have developed a briquetting machine using briquetting machines, which can be processed at high temperatures to compress these scraps into blocks and reuse them. The volume of the compressed block is not very large, and it is convenient to store and transport. In this way, it is also better to avoid other losses during transportation, reduce costs, and pollute the environment.

    金属2.jpg金属3.jpg
    金属17.jpg金属19.jpg


    More
  • Application range of metal baler
    Application range of metal baler

    How are metal scraps produced? They are scraps, shavings, and leftovers produced from machined metal, all of which are scrap metal. After the chips are produced, the workers usually push the materials to the side with trolleys. After a certain amount, the recyclers collect these chips, and the company can also get a part of the income. The disadvantages of stacked chips are: the metal chips are piled together, and the cutting fluid in the metal chips can not be well placed, resulting in the whole floor, which has a great impact on the workshop environment. In summer, flies fly everywhere. This makes many companies very distressed.

    The metal chip briquetting machine can solve this situation from the root cause. Metal shavings briquetting machine, processing iron shavings, aluminum shavings, stainless steel shavings, copper shavings, squeezing hair-like masses or fingernail-like granules into round cakes, one is to reduce the stacking volume of chips , The second is to improve the workshop environment. The metal chip briquetting machine complete system is equipped with a waste liquid collection device. Through the secondary filtration, your waste cutting oil can be put on the ground and the cutting liquid can be reused, thereby improving economic benefits .

    金属线2.jpg金属线4.jpg


    More
  • Nick Baler Hydraulic metal Baler Press
    Nick Baler Hydraulic metal Baler Press

    NKY81 Series Hydraulic Scrap Metal Baler

    No

    Type

    Nominal Force

    (KN)

    Power (KW)

    Feed Box Size

    (mm)

    Bale Size

    (mm)

    Productivity

    (kg/h)

    Operation

    1

    NKY81-1250

    1250

    15

    1200*700*600

    300*300

    800-1500

    Manual or PLC

    2

    NKY81Q-1350

    1350

    22

    1400*600*600

    600*240

    1500-2200

    Manual or PLC

    3

    NKY81-1600A

    1600

    22

    1600*1000*700

    350*350

    2000-3000

    Manual or PLC

    4

    NKY81-1600B

    1600

    22

    1600*1200*800

    400*400

    2000-3000

    Manual or PLC

    5

    NKY81-2000A

    2000

    30

    1600*1200*800

    400*400

    2000-3000

    Manual or PLC

    6

    NKY81-2000B

    2000

    37

    1800*1400*900

    450*450

    2500-3500

    Manual or PLC

    7

    NKY81-2500A

    2500

    44

    1800*1400*900

    450*450

    3000-5000

    Manual or PLC

    8

    NKY81-2500B

    2500

    44

    2000*1400*900

    500*500

    3000-5000

    Manual or PLC

    9

    NKY81-2500C

    2500

    60

    2000*1750*1000

    500*500

    3500-5000

    Manual or PLC

    10

    NKY81-3150A

    3150

    60

    2000*1400*1000

    500*500

    3500-5000

    Manual or PLC

    11

    NKY81-3150B

    3150

    60/66

    2000*1750*1200

    500*500

    3500-5000

    Manual or PLC

    12

    NKY81-3150C

    3150

    90

    2600*2000*1200

    550*550

    4000-7000

    Manual or PLC

    13

    NKY81-4000A

    4000

    66

    2000*1600*1100

    550*550

    4000-7000

    Manual or PLC

    14

    NKY81-4000B

    4000

    110

    2600*1750*1200

    550*550

    5000-8000

    Manual or PLC

    15

    NKY81-4000C

    4000

    90

    3000*2000*1200

    600*600

    6000-8000

    Manual or PLC

    16

    NKY81-6000

    6000

    135

    5000*2000*1200

    700*700

    8000-10000

    Manual or PLC


    More
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top