News Center

our commitment to nickbaler
  • In order to ensure that the metal shearing machine is more stable and convenient in operation, the operator must follow the correct process to complete the installation, so what is the correct installation process?

    1. The installation must be carried out in accordance with the corresponding steps, and all parts must not be installed incorrectly or reversed, otherwise it will affect the normal operation of the metal shearing machine.

    2. Locate the center point of the metal shearing machine, and place all parts steadily to keep the entire machine stable and to ensure that its internal structure is also stable.

    After the metal shearing machine is installed, you need to check the corresponding lines to see if all the lines are normal and whether there is any damage to the parts, and then try again. Only after completing such a process can you be able to Use within the time limit.

    If there is any damage, check again after repairing, and make sure that the metal shearing machine is installed correctly, so as to ensure that there will be no danger during use.

    鳄鱼式剪切机,+鳄鱼式液压金属剪切机 拷贝.jpg

    NICKBALER metal shearing machine has the characteristics of fast speed, simple structure, stable action, low failure rate and easy cleaning and maintenance. https://www.nickbaler.net

    21-11-09
  • Although the electro-hydraulic proportional control system of the semi-automatic waste paper baler has different structures and functions, they can all be summarized into functions such as command components, comparison components, electric controllers, electro-hydraulic proportional valves, hydraulic actuators, and detection feedback components. A system composed of the same basic unit.

    1. The command component is an input component that generates a control signal, which is added to the input terminal of the system.

    2. The function of the comparison element is to compare the input signal with the feedback signal, and the deviation signal obtained is used as the input of the electronic control.

    3. The function of the electric controller is to process, reshape and amplify the input signal in order to meet the control requirements of the electro-mechanical conversion device.

    4. The core of the electro-hydraulic proportional control is the proportional valve. The proportional valve can be divided into two parts, the electro-mechanical converter and the hydraulic amplifying element. The valve may also have a detection feedback element.

    5. Hydraulic actuator, usually refers to hydraulic cylinder or hydraulic motor, which is the output device of the system, used to drive the load.

    6. Detect the feedback element of the semi-automatic waste paper baler. For closed-loop control, a feedback element needs to be added. It detects the actual value of the controlled quantity or intermediate variable and obtains the feedback signal of the system.

    1-2废纸 (2).jpg

    The NICKBALER semi-automatic baler adopts a PLC control system, which can automatically feed and detect, automatically and continuously discharge the bale, and has a stable hydraulic system. https://www.nickbaler.net

    21-11-09
  • After the hydraulic baler has been used for a long time, the cylinder of the waste paper baler will crawl at a low speed. There are many reasons for this phenomenon. Let's take a look at the own reasons for the crawl of the cylinder of the waste paper baler:

    1. The mixing of air into the hydraulic medium reduces the volumetric compression modulus of the liquid, changing from "rigid" to "elastic", resulting in unstable speed of the oil cylinder of the waste paper baler, which is one of the most common causes of crawling.

    2. The sliding parts of the hydraulic baler cylinder are severely worn, strained and seized.

    3. The process and accuracy problems of the oil cylinder of the waste paper baler: the size of the sealing groove is incorrect, the piston rod is bent in the full length or partially, the coaxiality of the cylinder bore and the guide sleeve is poor, and the straightness of the cylinder inner diameter Differences will cause crawling phenomenon.

    微信图片_20210608090416 拷贝.jpg

    NICKBALER seizes the trend of market development, strengthens innovation ability, and strives to introduce more Baler equipment that meets social needs. https://www.nickbaler.net


    21-11-05
  • NICKBALER vertical waste paper baler is specially used for the recycling, compression and packaging of waste corrugated boxes, cardboard, newspapers and other materials.

    The performance advantages of vertical waste paper packaging:

    1. The hydraulic transmission power is stable and the pressure is high

    The hydraulic system of the vertical waste paper baler can continuously and stably generate driving force, and the pressure is greater than that of the pneumatic transmission device, which can effectively realize low-speed and large-tonnage operation.

    2. Compact structure

    With the same power, the hydraulic system transmission device has a smaller volume, a more compact structure, and has better performance than a pneumatic transmission device.

    3. Good safety performance

    The safety protection work of the vertical waste paper baler using hydraulic transmission is relatively easier, and the safety threat coefficient is small during operation.

    8-2小型废纸.jpg

    NICKBALER vertical waste paper baler has the characteristics of small footprint, simple operation, high work efficiency, and mobile use. https://www.nickbaler.net

    21-11-03
  • Three aspects should be paid attention to when choosing a horizontal garment Baler machine:

    In production, many companies or individuals need to use a baler for the purpose of convenient storage and transportation. There are many types of balers from the specific purpose of use, such as common horizontal clothing balers, cotton balers, and so on. Balers are widely used for loose compression packaging of cotton gauze, hemp, wool, paper skin, sponge, plastic, waste paper, waste aluminum, waste iron, stainless steel corners, etc.

    A good baler can make the extruded packaging uniform in size and specific gravity density, thereby effectively reducing transportation and smelting costs, and more in line with the requirements of container transportation. Because of the versatility and commonality of the baler, the baler is used frequently and wears a lot. How to keep the performance of the baler stable, the longer it is used? This requires a certain amount of effort in purchasing. As a commonly used machine in production, look for the three key points of the manufacturer's qualification, reputation and mechanical quality when purchasing a horizontal garment baler.

    1. Qualification of Baler machine manufacturer, only the scale of Baler machine manufacturer reaches a certain scale and the operating time reaches a certain number of years before there is enough experience in the production and maintenance of Baler machine.

    2. The credibility of the Baler machine manufacturer, the people who do the production know that credibility is a treasure. In particular, the reputation of the manufacturer must be strictly inspected when purchasing and purchasing a Baler. Reputable manufacturers not only provide good service and follow-up services, but also provide more convenience when purchasing.

    3. The quality of the baler and work-related accidents are unwilling to be seen by factories and individuals. How to avoid industrial accidents is actually very important when purchasing machinery. At this time, the advantages of the good quality of the old factory are highlighted. Quality is about work safety. If you don't want to deal with all kinds of troubles in the future, you still have to choose a reliable old factory or personally inspect and buy it.

    服装net7.jpg

    NICKBALER cooperates with people from all walks of life in an honest and trustworthy manner to create high-quality machinery and equipment!https://www.nickbaler.net


    21-10-26
  • Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.

    Common causes of failure: the overflow valve fails, and the oil pump is not working properly.

    Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.

    1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.

    2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.

    微信图片_20200731152256 拷贝.jpg

    Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nickbaler.net


    21-10-22

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • Tony.wang@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top