News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
How to properly maintain the hydraulic system daily
Author : admin Time : 22-07-25 AllPageView : 54

1. Choose the right hydraulic oil

For the hydraulic system of an excavator, it cannot lack the support of hydraulic oil in the working process. In addition to providing power to the excavator, the hydraulic oil can also act as a lubricating and cooling device for the excavator.

Its important functions also make the quality of the hydraulic oil have an important impact on the performance of the hydraulic system. And this requires us to choose the most suitable oil quality in the process of selecting the hydraulic oil in close contact with the working environment and the specific type of the oil pump.

2. Prevent the system from entering air

In the process of using the excavator, the hydraulic system should also be prevented from entering air. If the hydraulic system enters the air, the performance of the system will be greatly affected or even many abnormal conditions such as noise, slowing down of operating speed, etc. The work intensity of the excavator will also be greatly reduced.

Therefore, during the actual use of the excavator, it is necessary to avoid placing the oil tank on the surface to prevent air from entering the hydraulic system. If air is found to enter the oil tank after the excavator is refueled, it should be the first time. To exclude.

3. Control oil pollution

The quality of the oil used by the baler will also have a greater impact on the stability of the overall system. Therefore, in order to ensure the working efficiency of the baler, it is necessary to avoid contamination of the hydraulic oil during the actual application.

In the actual use process, the independent use of different hydraulic oils should also be ensured to avoid mixing, and a filter should be placed at the inlet of the oil tank to prevent impurities such as moisture and dust from entering the system.

When the system is used for a certain period of time, it should be cleaned regularly to ensure that the impurities in the hydraulic pump and hydraulic valve can be removed in time.

4. Control the temperature of hydraulic oil

In the process of using the baler, if the hydraulic oil is overheated, its viscosity will be greatly reduced, and its lubricity will be deteriorated, which will increase the wear of the baler equipment. Both operating efficiency and operating performance will have a negative impact.

In order to avoid this situation, we need to temporarily suspend the operation after a certain period of time in the actual work process, and wait for the hydraulic oil temperature to drop to a reasonable range before proceeding with the follow-up work.

At the same time, in the process of operation, the regular cleaning of the cooling device of the Baler and the good control of the oil volume in the oil tank should also be ensured, so that the excavator can run smoothly and safely.

1658720032713989.jpg


Recommended news
  • How does Kenya prevent the aging of plastic hydraulic balers?

    The protection status of the plastic hydraulic baler often determines the service life of the machine itself and the working power of the machine. The plastic hydraulic baler itself is actually a type of high-precision machinery. High-precision machinery has very high process requirements. Structural parts need to be strictly inspected before mass production. Insufficient internal density will lead to problems and faults in plastic hydraulic balers. Faced with this, the large or regional brand plastic hydraulic baling machinery manufacturers on the market at that time did a good job. Therefore, We should pay attention to this.

    1.When choosing a plastic hydraulic baler, try to choose brand products.

    2.The problem of proper use of itself, everything has a shipping cost, and the high strength and overloaded working strength shorten the service life of the plastic baler, so the customers who use the plastic hydraulic baler should be moderate in their use.

    3.The daily maintenance of plastic hydraulic balers is the basic work of equipment protection, and it must be institutionalized and standardized. For the regular protection and maintenance of plastic hydraulic balers, work quotas and material consumption quotas should be formulated and checked according to the quotas.The regular protection and maintenance operations of plastic hydraulic balers should be included in the audit content of the worker contract responsibility system.

    4.The regular inspection of the plastic hydraulic baler is a planned preventive inspection. In addition to the human senses, the inspection method should also be checked regularly.

    5.The plastic hydraulic baler equipment should also be thoroughly inspected and dealt with: inspection of oil cylinders, oil pumps, electrical appliances, and various sliding parts. The protection of the plastic hydraulic baler should comply with the protection regulations.

    The protection specification of the plastic hydraulic baler is the requirements and regulations for the daily protection of the equipment. Following the protection specification of the plastic hydraulic baler can prolong the service life of the equipment and ensure a safe and comfortable working environment.

    微信图片_202206220828158.jpg

    Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. Follow NICKBALER: https://www.nickbaler.net


  • Features of MSW Baling Press Machine

    1. The structure of the hydraulic MSW horizontal baler is mainly closed-door and open-door structure. The closed-door structure can make the density of the bales larger, which is suitable for the compression and baling machine of more items, hydraulic opening and closing, manual bundling, safe and fast operation.Open door structure, both sides are locked, continuous delivery, automatic threading (wire) or hooking (wire), automatic bundling, and faster operation.

    2. Imported PLC programming, LCD screen, simple, clear and clear at a glance.

    3. The connection method of the ball joint hydraulic cylinder is not prone to failure and increases the use time of the cylinder.

    4. Thickened steel plate, the fuselage is firmer.

    5. The oil circuit is standardized, and the hydraulic oil pipe hose is rarely used, which avoids the oil leakage phenomenon caused by the loosening of the screw due to the vibration of the machine, and also reduces the potential safety hazard.

    6. A variety of operation methods.

    7. Energy saving, low noise.

    mmexport1560419350147 拷贝.png

    All of NICKBALER Machinery's balers can do the job you need and are very easy to operate. If you have any questions, you can go to NICKBALER's website to learn.https://www.nickbaler.net.


  • NK-T90L Double Chambers Clothes Balers

    NK-T90L double-chamber Clothes baler The double-chamber clothes baler is used for the compression and Baling Machine of old clothes, towels, rags, fabrics and other materials.

    It is also known as an open double-chamber baler, a rotatable dual-chamber baler, or a two-case baler. This baler is designed with two compression chambers. The two compression chambers are rotated and balanced by a central shaft. The double cavity can realize feeding in one cavity and compressing the bale in the other cavity, which greatly improves the work efficiency. When the block is compressed,the cavity will have a signal to automatically carry the box, so that it can be easily bundled. This double-chamber clothes baler combines the dual advantages of the double-chamber baler and the suitcase baler, and is currently the most efficient, user-friendly and labor-saving garment baler in the industry.

    cc561b38ee076be9aa635a9ef866467 拷贝.png

    The double-chamber clothes baler produced by NICKBALER has always had its own uniqueness, because we believe that only by making our products more refined and more distinctive, our sales will be broader. If necessary, feel free to contact us at 86-29-86031588


Recommended products
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
  • Waste paper baling machine with manufacturer price
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • Tony.wang@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top