News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
The operation speed of the hydraulic press of the automatic waste paper baler
Author : admin Time : 20-05-31 AllPageView : 675

The operation speed of the hydraulic press of the automatic waste paper baler is as clear as that:

When the hydraulic paper machine enters the automatic waste paper packer, the load of the hydraulic machine is large and the pressure is high. Therefore, to ensure that the hydraulic oil pump is not overweight, the total flow must be reduced, which means that the speed of the hydraulic machine during operation is reduced; At this time, its load becomes smaller and the pressure is low, so that the total flow can be increased under the condition of ensuring that the power of the hydraulic oil pump is not easily exceeded, which also increases the working speed of the hydraulic machine. To sum up, it means that the operating speed of the hydraulic machine is only related to the total flow. In other words, if the total flow becomes larger, the speed will be faster, and if the total flow becomes smaller, the speed will be slower.

mmexport1555663937574.jpg

The immediate hazard factors of the productivity of the fully automatic waste paper packing machine: the packaging model specification model, the different model specification, the different specification, the different specification model immediately determines the productivity of the waste paper packing machine. Axial plunger pump of automatic waste paper baler. The axial plunger pump converts the mechanical kinetic energy of the power machinery into hydraulic machinery (gravity potential energy, mechanical energy, working pressure energy, etc.) according to the rotation of the centrifugal impeller. When the rotor of the axial plunger pump motor rotates, the leaves suffer from the cohesive force and the effect of working pressure oil.

During the whole application process of the automatic waste paper packer, some common faults are unavoidable. The larger common fault means that the indenter does not move and does not move back. If the indenter does not move, it will endanger the application of the waste paper packer and cause waste. There are four key points for the reason that the head of the paper baler does not return:

DSCN0500.jpg

First check part of the hydraulic solenoid valve driving force operation, the main reduction hydraulic cylinder is always advancing, and the working pressure of the hydraulic transmission system is increased, it is confirmed that the forward operation is not terminated, thus causing the indenter to be unable to reverse, the forward operation must be terminated first, and then reverse . If the advancement is still not terminated at this time, it can be judged that the front limit has a common fault, and it is necessary to check whether the front limit is damaged. If the forward movement is terminated, the indenter can not be reversed, it will be caused by the rear limit, check whether the reverse relay is plugged in, if it is not plugged in, it means that the rear limit is caused.

Nick Baler can supply many kinds of baler machine,Waste paper baler machine,For more information ,please visit : www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time


Recommended news
  • How does Kenya prevent the aging of plastic hydraulic balers?

    The protection status of the plastic hydraulic baler often determines the service life of the machine itself and the working power of the machine. The plastic hydraulic baler itself is actually a type of high-precision machinery. High-precision machinery has very high process requirements. Structural parts need to be strictly inspected before mass production. Insufficient internal density will lead to problems and faults in plastic hydraulic balers. Faced with this, the large or regional brand plastic hydraulic baling machinery manufacturers on the market at that time did a good job. Therefore, We should pay attention to this.

    1.When choosing a plastic hydraulic baler, try to choose brand products.

    2.The problem of proper use of itself, everything has a shipping cost, and the high strength and overloaded working strength shorten the service life of the plastic baler, so the customers who use the plastic hydraulic baler should be moderate in their use.

    3.The daily maintenance of plastic hydraulic balers is the basic work of equipment protection, and it must be institutionalized and standardized. For the regular protection and maintenance of plastic hydraulic balers, work quotas and material consumption quotas should be formulated and checked according to the quotas.The regular protection and maintenance operations of plastic hydraulic balers should be included in the audit content of the worker contract responsibility system.

    4.The regular inspection of the plastic hydraulic baler is a planned preventive inspection. In addition to the human senses, the inspection method should also be checked regularly.

    5.The plastic hydraulic baler equipment should also be thoroughly inspected and dealt with: inspection of oil cylinders, oil pumps, electrical appliances, and various sliding parts. The protection of the plastic hydraulic baler should comply with the protection regulations.

    The protection specification of the plastic hydraulic baler is the requirements and regulations for the daily protection of the equipment. Following the protection specification of the plastic hydraulic baler can prolong the service life of the equipment and ensure a safe and comfortable working environment.

    微信图片_202206220828158.jpg

    Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. Follow NICKBALER: https://www.nickbaler.net


  • Features of MSW Baling Press Machine

    1. The structure of the hydraulic MSW horizontal baler is mainly closed-door and open-door structure. The closed-door structure can make the density of the bales larger, which is suitable for the compression and baling machine of more items, hydraulic opening and closing, manual bundling, safe and fast operation.Open door structure, both sides are locked, continuous delivery, automatic threading (wire) or hooking (wire), automatic bundling, and faster operation.

    2. Imported PLC programming, LCD screen, simple, clear and clear at a glance.

    3. The connection method of the ball joint hydraulic cylinder is not prone to failure and increases the use time of the cylinder.

    4. Thickened steel plate, the fuselage is firmer.

    5. The oil circuit is standardized, and the hydraulic oil pipe hose is rarely used, which avoids the oil leakage phenomenon caused by the loosening of the screw due to the vibration of the machine, and also reduces the potential safety hazard.

    6. A variety of operation methods.

    7. Energy saving, low noise.

    mmexport1560419350147 拷贝.png

    All of NICKBALER Machinery's balers can do the job you need and are very easy to operate. If you have any questions, you can go to NICKBALER's website to learn.https://www.nickbaler.net.


  • NK-T90L Double Chambers Clothes Balers

    NK-T90L double-chamber Clothes baler The double-chamber clothes baler is used for the compression and Baling Machine of old clothes, towels, rags, fabrics and other materials.

    It is also known as an open double-chamber baler, a rotatable dual-chamber baler, or a two-case baler. This baler is designed with two compression chambers. The two compression chambers are rotated and balanced by a central shaft. The double cavity can realize feeding in one cavity and compressing the bale in the other cavity, which greatly improves the work efficiency. When the block is compressed,the cavity will have a signal to automatically carry the box, so that it can be easily bundled. This double-chamber clothes baler combines the dual advantages of the double-chamber baler and the suitcase baler, and is currently the most efficient, user-friendly and labor-saving garment baler in the industry.

    cc561b38ee076be9aa635a9ef866467 拷贝.png

    The double-chamber clothes baler produced by NICKBALER has always had its own uniqueness, because we believe that only by making our products more refined and more distinctive, our sales will be broader. If necessary, feel free to contact us at 86-29-86031588


Recommended products
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
  • Waste paper baling machine with manufacturer price
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • Tony.wang@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top