The manufacturer of small waste paper Baling Machines in Shaanxi Nick Machinery Factory has always put quality first:
The diversified development of products has brought a broad space for development of small-scale Shaanxi Nick Machinery Factory waste paper baler, and also increased the diversity of various small-scale Shaanxi Nick Machinery Factory waste paper baler manufacturers.
At present, the entire small-scale waste paper baler market in Shaanxi Nick Machinery Factory in our country, because the skills are not foreign customs, the funds are not in place, and the discussion staff is not rich, most of the automatic waste paper baler manufacturers in Shaanxi Nick Machinery Factory are still in development. In this regard, we point out that if we want to break this undesirable status quo in the waste paper baler market of the small-scale Shaanxi Nick Machinery Factory, we must reform the straw small-scale Shaanxi Nick Machinery Factory waste paper baler, and the small-scale Shaanxi Nick Machinery Factory waste paper baler. Changes in skills, changes in product quality, changes in product varieties, etc.
China’s fully hydraulic small waste paper baler in Shaanxi Nick Machinery Plant has been slow to develop, and its skills can’t keep up. This is obvious to all. From the introduction of foreign imported equipment in the past to the development of its own fully automatic waste paper baler equipment in Shaanxi Nick Machinery Plant, this The imitation skills have remained unchanged until today. Such excessive imitation has led to the very slow development of the waste paper baler in China's Shaanxi Nick Machinery Factory. Therefore, it is necessary to develop the straw baler that belongs to us through learning and research. Equipment can better meet the growing demand for shopping malls, and can promote the rapid development of the packaging industry.
The change in product quality is also important, because the quality of the small-scale Shaanxi Nick Machinery Factory waste paper baler is not only related to the quality of the product to be produced, but also the production of the small-scale Shaanxi Nick Machinery Factory waste paper baler manufacturer.
1. Shearing oil cylinder: It is a double-acting single-piston rod type oil cylinder. Its front end is connected with the frame, and the rear part is connected with the machine base by lower pins (one on each side), and the frame shaft is driven by the push-out and retraction of the piston rod. swing. Implement the cutting action.
2 Frames: The frame is an important flowing part. The left side of the front part is equipped with an upper shear. The middle is connected with the frame by the frame shaft and frame bushing, and the rear is connected with the upper pin shaft of the shear cylinder. .
3. Machine base: It is composed of welding base, left frame, right frame, etc. The right frame and the left frame of the base are welded parts, of which the right and left frames use inner and outer (double) side plates, and the structure is firm.
4. There is a platform and a slope at the front of the machine base, and a lower shear is installed between them. There is a large hole in the middle of the left and right frames for installing the frame, and there is a hole in the rear for installing the shearing cylinder. The front part of the frame is welded with a pressure material cylinder bracket, which is used to install the pressure material cylinder and other portal metal shears.
NICKBALER has rich production experience and integrated services. Using our balers can greatly improve work efficiency and reduce human and financial expenditures. Contact us at 86-29-86031588 or https://www.nkbaler.net/.
The semi-automatic plastic bottle Baling machine is mainly used for Baling machinewaste products, but because it is semi-automatic packing, it needs to be worn manually. Many friends do not know how to operate it. NKBALER has summarized the following points based on experience , I hope it can help everyone.
Semi-automatic plastic bottle Baling machine strapping method:
1. Install the pp tape on the pp tape mounting roller.
2. There is a brake pad connected to the "L"-shaped metal rod on the roller and the fuselage. There are two white rollers on the metal rod. middle.
3. After the upper and lower extensions are inserted, press the connecting spring on the front of the upper extension (the machine is turned on at this time).Line packing.
The above is the method of wearing the semi-automatic plastic bottle baler. I believe that through the introduction, everyone has a deeper understanding of how to operate the plastic baler. If you have other questions, you can leave a message for consultation.https://www.nkbaler.net/.
The electrical control part of the waste paper baler is mainly composed of PLC, motor and electrical components of relays and switches. The most vulnerable parts of these parts are the motor and electrical components. Today we share with you: baler electrical control Box Daily Precautions
1. Pay attention to the grounding, lightning protection, rainproof and moisture-proof of the power cord.
2. Non-professional operators of the electric control cabinet are prohibited from using it.
3. Pay attention to the antifreeze work of the motor and the long-term overload of the motor. Effective prevention of these two items can greatly reduce the damage to the motor, thereby maintaining the normal Baling machineof the waste paper baler.
4. Pay attention to the button operation of the console part, do not use too much force on the switch button, and prevent misoperation to avoid damage caused by short circuit.
The above 4 points are what I want to share with you today, I hope it can help you!
NKBALER provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other Baling machineequipment, company website: https://www.nkbaler.net/. Tel: 86-29-86031588, looking forward to contacting your cooperation!