News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
What's the function of straw baling machine
Author : admin Time : 20-02-06 AllPageView : 421

China is a big agricultural country. When the summer harvest and autumn and winter come, many stalks of rice, wheat, corn and other crops are burned in the fields. The large amount of dense smoke produced has seriously affected the ecological environment and air quality. In response to this, implementation plans for comprehensive utilization of Straw Baling Machine have been issued in various parts of China, and the state has also subsidized this to some extent. However, many farmers friends can still see it being burned. So what causes the repeated prohibition of Straw Baling Machine burning? What are the benefits of comprehensive Straw Baling Machine utilization?
1.
Straw Baling Machine is high-quality fertilizer
Rice Straw Baling Machine, big wheat and rape Straw Baling Machine are good organic fertilizers. Implementing Straw Baling Machine return to the field, or using rapid decay techniques such as preservatives and compound bacteria to concentrate and compost fertilizers and apply them to farmland will promote soil fertility and soil physics Nature, enhance crop disease resistance, optimize farmland ecological environment have very good results, can increase grain production by 10-20%.
2. 
Straw Baling Machine is an important feed for the development of aquaculture
The direct use of Straw Baling Machine to feed cattle and sheep and other herbivorous livestock to develop the breeding industry can greatly save the breeding costs and increase farmers' income. At the same time, fertility can be improved by returning the Straw Baling Machine to the field. If the Straw Baling Machine is treated by silage and ammoniation, it can also improve the crude protein content of the Straw Baling Machine, the digestibility of organic matter, and the feed intake.

3. Straw Baling Machine is a good base for the development of edible fungi

Straw Baling Machine, wheat Straw Baling Machine and corn cob are good culture substrates for edible fungus cultivation. Approximately 5 kg of Straw Baling Machine can be consumed per square meter of cultivated area. The quality of the culture medium after use is still a rare high-quality organic fertilizer, which can be directly returned to the field without pollution and harm.
4. Straw Baling Machine is an alternative material for new energy

Crop Straw Baling Machine power generation can not only relieve the energy shortage in rural areas, but also help protect ecology and resources. It is a good clean renewable energy source. Through the gasification of Straw Baling Machine, the carbon, hydrogen, oxygen and other elements in the Straw Baling Machine become combustible gases such as carbon monoxide, hydrogen, and methane, which can be directly used as high-quality energy for domestic and industrial production, and improve the biomass energy conversion rate than direct combustion -4 times.
5. Straw Baling Machine is an important biomass energy
According to expert estimates, crop Straw Baling Machines contain about 5% protein and about 30% cellulose, and also contain certain amounts of calcium, phosphorus and other minerals. The nutritional value of 1 ton of common Straw Baling Machine is on average equivalent to that of 0.25 tons of grain.
6. 
Straw Baling Machine is an environmentally-friendly industrial raw material.
Using Straw Baling Machine as a raw material, developing building materials, light panels, fast-food lunch boxes, packaging materials, etc., and developing environmentally-friendly green industries, can play the role of Straw Baling Machine instead of wood to make a variety of products.

Recommended news
  • The solution to the pressure-free hydraulic system of the waste paper baler

    Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.

    Common causes of failure: the overflow valve fails, and the oil pump is not working properly.

    Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.

    1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.

    2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.

    微信图片_20200731152256 拷贝.jpg

    Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nickbaler.net


  • The oil pump of the horizontal waste paper baler is overheated.

    The oil pump of the horizontal waste paper baler generally has a plunger pump and a vane pump. The reasons for the loud noise of the oil pump system may include: loosening of the fastening screws of the oil pump; wear of the power bearing or stator of the oil pump; serious damage to the oil pump; inside the oil tank Air bubbles, poor oil intake of the hydraulic pump and other reasons will cause this problem. At this time, we should analyze the specific situation and solve the problem of excessive noise in the hydraulic waste paper baler oil pump!

    The possible causes of the failure of the oil pump overheating problem are that the oil pipe is blocked, causing the pressure of the hydraulic oil to increase; the power of the oil pump is too large and overloaded; the hydraulic oil is used unreasonably and the viscosity is too high.

    The quality of the hydraulic oil of the hydraulic waste paper Baler has a great influence on the hydraulic pump. The replacement cycle of the plunger pump is generally one year. If the plunger pump is noisy, it is recommended to consider replacing the plunger pump plunger.

    IMG_20190508_075449 拷贝.jpg

    The waste paper baler is used to extrude waste paper and similar products under normal conditions to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. https://www.nickbaler.net


  • The first refueling method of horizontal waste paper baler

    The method of refueling the newly purchased waste paper baler equipment before starting, and the oil leakage problem of the newly purchased horizontal waste paper baler equipment has been plagued by the majority of user groups, so how to solve the problem of the waste paper baler oil Well, let's take a look at the waste paper baler equipment with Nick Machinery. What should I pay attention to when using the refueling method?

    1. The oil leakage of the waste paper baler is relatively severe. If the oil pump pressure is adjusted too high, the wear of the movable parts will increase the sealing gap, the sealing device will be damaged, the viscosity of the oil used in the waste paper baler will be too low, etc., which will increase the leakage. After clarifying the reason, adopt the corresponding steps to eliminate it.

    2. Poor heat dissipation, insufficient heat dissipation area of ??the fuel tank, too little oil storage in the fuel tank, resulting in too fast oil circulation, poor cooling of the waste paper Baler cooler, such as failure of cooling water supply or failure of electric fans, high ambient temperature, etc. All are the reasons for poor heat dissipation.

    3. The system does not have an unloading circuit or the unloading circuit does not perform well. When the waste paper baler system does not need to pressurize the oil, the oil is still overflowing to the fuel tank under the working pressure set by the overflow valve or at the unloading pressure Return to the fuel tank downstream in a higher environment. 

    4. Misuse of oil with too high viscosity, the waste paper baler will cause excessive hydraulic loss.

    3-2废纸 (2).jpg

    The horizontal waste paper baler can be customized in different models according to the different needs of customers.https://www.nickbaler.net

Recommended products
  • Cow dung dewatering machine manufacturers
  • Cow dung dring machine price
  • Cow dung compressor, Cow Dung Block Press
  • NK8060T15 Diesel Engine Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top