News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
Technical problems in the wheat straw baler industry in my country
Author : admin Time : 20-07-12 AllPageView : 230

At present, the overall level of my country's wheat straw baler packaging industry is relatively low, most manufacturing enterprises have weak technical development capabilities, and the technology content of wheat straw baler is low.

In the development of new products, the overall technical strength of the industry is insufficient. The new products developed are often copied from the equipment of foreign counterparts. The general mechanical functions are not as good as the original ones. In short, the new products have no new ideas.

1). The product design quality is not high and the predictability is poor.

The research and development of wheat straw baling Press machines require that the design staff have a good solid theoretical foundation, rich practical experience, innovative spirit and comprehensive quality. However, it is possible to prepare these premises only for products with low complexity, but not enough for products with high complexity and automation.

1520722623341 拷贝.jpg

When designing packaging machinery products with complex structure and high degree of automation, due to the objective premise and the limitations of human own physiological factors, the design is easy to make mistakes, artificial omissions, and often lack predictability.

Whether the designed products are processed with good craftsmanship, whether the dimensions of the various departments are accurate, whether there are any human omissions, how to assemble, etc., the design staff's experience is helpless, but it is these problems that directly affect the quality of the product.

2) The product design and manufacturing cycle is long and cannot respond quickly to the market.

The wheat straw baler packaging machinery enterprise generally adopts the wing machine drawing, which enables the enterprise to get rid of the drawing board, shorten the product design cycle, and improve the quality of the design, but it has not solved the problem from the fundamental seven.

At present, the market situation is that the life cycle of products is getting shorter and shorter, and the production form is increasingly showing a single-piece small batch format to adapt to the rapid change of the market. All of these pose severe challenges to traditional design and manufacturing models.

3) The high cost of product design and manufacturing leads to an increase in product cost and lack of market competitiveness.

1520722638485 拷贝.jpg

In order to test the function of the product, the wheat straw baling Press machine sometimes needs to do some functional trial and error. Some test faces are destructive, and some are costly. In some cases it is impossible to test at all.

These all bring difficulties to the design and manufacture of products, and increase the extra cost, which is sometimes very high; the main reason is that the quality of the product design is not high, the predictability is poor, the probability of the occurrence of waste products increases, so that the finished product The rate decreases. The cost allocated to each product increases.for more information ,please visit us : www.nickbaler.net 


Recommended news
  • The impact of environmental awareness on waste paper baler

    With the increasing use of waste paper baler machinery, the frequency of use has gradually increased. However, there are still some people who may not know the waste paper baler very well. Some people even think that the waste paper baler is a waste paper recycling machine. Some people even think that it is the evolution of the waste paper basket. In fact, this is not the case. The waste paper baler is actually an existence for more convenient recycling of waste paper. The waste paper baler can compress and integrate waste paper to facilitate recycling and transportation.

    People's awareness of environmental protection is getting stronger and stronger, and environmental problems are becoming more and more serious. Every one of us citizens should fulfill their environmental protection obligations and contribute to environmental protection. Therefore, under the background of environmental protection, the waste paper baler came into being and was well received. Our waste paper packaging technology is not particularly perfect, but we are also following in the footsteps of foreign advanced technology, and we are constantly innovating and improving. 

    8-2废纸.jpg

    The waste paper baler can pack some waste paper for recycling and reuse, which is mainly suitable for some large paper mills or large users of paper products. And the waste paper baler can also recycle old things such as plastic straws.

    The application of waste paper baler greatly reduces the loss of manpower and material resources, and is convenient and fast, simple to use, and large-area waste paper baling and recycling is of great significance to environmental protection and avoiding waste.

    NICKBALER waste paper baler can be designed and customized according to the actual site of the customer. www.nickbaler.net

  • The influence of hydraulic system on waste paper baler

    The cleaning operation of the hydraulic system inside the waste paper baler is very important to the baler, because the waste paper baler needs a good hydraulic system when working. Therefore, in daily work, the cleaning of the baler should not be underestimated and must be taken seriously. Below, let's take a look at the precautions for cleaning the waste paper baler:

    When cleaning the waste paper baler, a low-viscosity special cleaning oil should be used. The clean oil is added to the fuel tank of the waste paper baler and heated to 50-80 degrees Celsius. Start the hydraulic pump and let it run dry. When cleaning the baler, you must often knock on the tube. This can remove the attachments. Clean for about 20 minutes. Check the contamination status of the oil filter, and clean the filter, and then clean it again. Repeat until there are not many contaminants on the filter. It’s okay when it’s time.

    The cleaning time of waste paper baler is generally 2 hours. For the more messy hydraulic system, each area can be cleaned according to the work area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate to clean the system.

    7-2废纸.jpg

    After cleaning, the clean oil must be drained, and the inside of the oil tank must be cleaned. When the waste paper baler system is restored to the normal operating state, add the specified hydraulic oil.

    Nick Machinery's waste paper baler has the characteristics of easy installation and operation, safe and reliable use, strong adaptability to the workplace, and reasonable price. www.nickbaler.net

  • Technological innovation is the top priority for the development of waste paper baler

    After years of development, waste paper baler has formed a considerable scale, although the scale of development of my country's baler industry has been very large. Nowadays, the development of all walks of life is inseparable from innovation. If the vertical waste paper baler can be developed in terms of technological innovation, at the same time in response to the call of the country, it will also bring more economy to the vertical waste paper baler equipment enterprises. interest.

    The new technology of vertical waste paper baler can increase the output of equipment. Although my country's waste paper baler industry has developed so fast in the past two years and the export volume has increased significantly, it is undeniable that there are still many shortcomings in the vertical waste paper baler

    If these problems are not improved in a short time, it will inevitably affect the development of the baler industry and the position of the vertical waste paper baler in the baler industry. The concentration of my country's baler industry is not enough, production capacity is scattered, and economies of scale cannot be formed. At present, the production capacity of the vertical waste paper baler has developed rapidly, but the technological progress of the industry is relatively slow, and the R&D and innovation capabilities are low. The service life and reliability of the vertical waste paper baler have gradually been unable to meet the needs of technological development. Therefore, technological innovation is urgently needed.

    The vertical waste paper baler is currently still stuck on capacity expansion, which makes China's baler industry lack a certain brand effect. Therefore, in terms of technological innovation of vertical waste paper baler, we must increase efforts to make contributions to my country's baler industry.

    6-2废纸.jpg

    The quality of the vertical waste paper baler is inseparable from the oil cylinder, and the function of the oil cylinder determines the stability of the baler. Similarly, the quality of hydraulic oil also affects the failure rate and service life of the cylinder. The cylinder needs to use No. 46 anti-wear hydraulic oil to ensure the efficient production of the baler.

    In the current baler industry, many small manufacturers are reluctant to develop and research new products, and will blindly imitate the products of large baler manufacturers. This is also an important factor leading to the slow development of the waste paper baler market.

    With the management philosophy of "Integrity creates the brand, and quality determines the future", Nick Machinery continues to improve the mechanism, strengthen brand awareness, and make products with excellent quality and better after-sales service. www.nickbaler.net


Recommended products
  • NK8060T15 Diesel Engine Baler
  • Wood Shaving Bedding Machine
  • PET Bottle Baling Press Nick Baler
  • Automatic Waste Paper Box Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top