News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
Nick Baler has several type of straw hydraulic baler for choice
Author : admin Time : 20-07-15 AllPageView : 289

The straw baler always has small precision parts during production and processing. Because of the composition of these small parts, the straw baler can work better.

One is the plunger pump. The plunger reciprocates in the pump cylinder to create a volume change between the plunger and the pump wall. The pump repeatedly sucks and discharges liquid and increases its pressure. The pump has the characteristics of high rated pressure, compact structure, high efficiency and convenient flow adjustment. It is widely used for high pressure, high flow and flow demand adjustment, such as hydraulic straw baler, construction machinery and ships. Piston pumps belong to the category of reciprocating pumps that generate high pressure. The second is the blade pump of the straw baler.

5551f3b79e8eca95552053df065711d 拷贝.jpg

The vane pump converts the mechanical energy of the power machinery into hydraulic machinery (potential energy, kinetic energy, pressure energy) through the rotation of the impeller. When the vane pump rotor rotates, the vanes are closely attached to the stator under the action of centripetal force and pressure oil. on the surface. The working volume formed by the two blades and the inner surface of the rotor and the stator is first discharged from small to large, and then discharged from large to small. When the blade rotates once, the oil absorption and discharge are completed twice. The structure of the blade pump is simple and the flow rate is large. Uniform, large displacement, high efficiency, more than one ton per hour.

The wire frame of the straw baler is composed of 4 sets of wire devices installed on the frame.The entire wire frame is suspended on a central axis of the compression frame, and moves horizontally relative to the compression frame under the action of the hydraulic motor.The compression frame is Welded components, equipped with wheels at the bottom, can move horizontally along the main slide rail under the push of the hydraulic cylinder. The lifting table is mainly made up of two horizontal beams bolted together. The lifting table can be moved up and down in the vertical direction under the push of two hydraulic cylinders.

For more information ,please visit : www.nickbaler.net or www.nkbaler.com 

even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time

Recommended news
  • The solution to the pressure-free hydraulic system of the waste paper baler

    Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.

    Common causes of failure: the overflow valve fails, and the oil pump is not working properly.

    Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.

    1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.

    2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.

    微信图片_20200731152256 拷贝.jpg

    Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nickbaler.net


  • The oil pump of the horizontal waste paper baler is overheated.

    The oil pump of the horizontal waste paper baler generally has a plunger pump and a vane pump. The reasons for the loud noise of the oil pump system may include: loosening of the fastening screws of the oil pump; wear of the power bearing or stator of the oil pump; serious damage to the oil pump; inside the oil tank Air bubbles, poor oil intake of the hydraulic pump and other reasons will cause this problem. At this time, we should analyze the specific situation and solve the problem of excessive noise in the hydraulic waste paper baler oil pump!

    The possible causes of the failure of the oil pump overheating problem are that the oil pipe is blocked, causing the pressure of the hydraulic oil to increase; the power of the oil pump is too large and overloaded; the hydraulic oil is used unreasonably and the viscosity is too high.

    The quality of the hydraulic oil of the hydraulic waste paper Baler has a great influence on the hydraulic pump. The replacement cycle of the plunger pump is generally one year. If the plunger pump is noisy, it is recommended to consider replacing the plunger pump plunger.

    IMG_20190508_075449 拷贝.jpg

    The waste paper baler is used to extrude waste paper and similar products under normal conditions to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. https://www.nickbaler.net


  • The first refueling method of horizontal waste paper baler

    The method of refueling the newly purchased waste paper baler equipment before starting, and the oil leakage problem of the newly purchased horizontal waste paper baler equipment has been plagued by the majority of user groups, so how to solve the problem of the waste paper baler oil Well, let's take a look at the waste paper baler equipment with Nick Machinery. What should I pay attention to when using the refueling method?

    1. The oil leakage of the waste paper baler is relatively severe. If the oil pump pressure is adjusted too high, the wear of the movable parts will increase the sealing gap, the sealing device will be damaged, the viscosity of the oil used in the waste paper baler will be too low, etc., which will increase the leakage. After clarifying the reason, adopt the corresponding steps to eliminate it.

    2. Poor heat dissipation, insufficient heat dissipation area of ??the fuel tank, too little oil storage in the fuel tank, resulting in too fast oil circulation, poor cooling of the waste paper Baler cooler, such as failure of cooling water supply or failure of electric fans, high ambient temperature, etc. All are the reasons for poor heat dissipation.

    3. The system does not have an unloading circuit or the unloading circuit does not perform well. When the waste paper baler system does not need to pressurize the oil, the oil is still overflowing to the fuel tank under the working pressure set by the overflow valve or at the unloading pressure Return to the fuel tank downstream in a higher environment. 

    4. Misuse of oil with too high viscosity, the waste paper baler will cause excessive hydraulic loss.

    3-2废纸 (2).jpg

    The horizontal waste paper baler can be customized in different models according to the different needs of customers.https://www.nickbaler.net

Recommended products
  • Cow dung dewatering machine manufacturers
  • Cow dung dring machine price
  • Cow dung compressor, Cow Dung Block Press
  • NK8060T15 Diesel Engine Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top