News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
The requirements of the waste paper baler on the packaging
Author : admin Time : 20-07-29 AllPageView : 380

We often say that the waste paper baler is a piece of equipment that has no requirements for packaging items. The main reason is that the waste paper baler has no special requirements on the shape of the packaged items. It is not like the waste paper baler and the waste paper baler. The size of the frame is limited, so waste paper baler waste paper baler from this level has a wide range of applications. But it is not to say that waste paper baler is suitable for all product packaging.

Generally speaking, the waste paper baler has certain limitations when it comes to packaging powdered items or simple leaking liquid packaging. The waste paper baler is mainly suitable for steel mills, recycling and processing occupations and non-ferrous and ferrous metal training occupations. The waste paper baler can knead all kinds of metal scraps (steel shavings, scrap steel, scrap aluminum, scrap copper, scrap stainless steel and scrap car scraps, etc.) into qualified furnace materials of various shapes such as cuboid, octagon, cylinder, etc. Reduce transportation and training costs, but also increase the furnace casting speed. Because the leakage of such items will fall into the core of the baler, and then damage the core of the baler, so when bundling such items, users should pay more attention to communication with the supplier, and choose the right one. The equipment is packed to prevent unnecessary trouble.

mmexport1551510315157 拷贝.jpg

In addition to the two products listed above, waste paper balers are not strict with regard to packaging items, so the scope of application is very wide. Application of waste paper baler: waste paper baler can be used for various non-metal compact packaging. Such as: cardboard, carton, shredded paper, cotton yarn, wool ball, plastic, grass and wood, sponge, wool, loose fiber, clothing, cloth, tobacco, plastic and other light foam and loose materials. The metal briquetting machine adopts advanced hydraulic transmission technology, uses high-quality wear-resistant oil seals, and the cylinder is processed and assembled by the latest domestic high-tech technology, and then ensures that continuous work does not reduce the cylinder pressure, is durable and runs smoothly; computer control, high degree of automation, Low failure rate, simple protection, etc.

mmexport1551510319717 拷贝.jpg

Nick Baler Hydraulic Bale Press Factory will never stop, will continue to improve the quality and function of the product itself, and produce better quality mechanical equipment for a wide range of users. Thank you for your support! for further information ,please visit us :www.nickbaler.net 


Recommended news
  • The solution to the pressure-free hydraulic system of the waste paper baler

    Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.

    Common causes of failure: the overflow valve fails, and the oil pump is not working properly.

    Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.

    1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.

    2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.

    微信图片_20200731152256 拷贝.jpg

    Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nickbaler.net


  • The oil pump of the horizontal waste paper baler is overheated.

    The oil pump of the horizontal waste paper baler generally has a plunger pump and a vane pump. The reasons for the loud noise of the oil pump system may include: loosening of the fastening screws of the oil pump; wear of the power bearing or stator of the oil pump; serious damage to the oil pump; inside the oil tank Air bubbles, poor oil intake of the hydraulic pump and other reasons will cause this problem. At this time, we should analyze the specific situation and solve the problem of excessive noise in the hydraulic waste paper baler oil pump!

    The possible causes of the failure of the oil pump overheating problem are that the oil pipe is blocked, causing the pressure of the hydraulic oil to increase; the power of the oil pump is too large and overloaded; the hydraulic oil is used unreasonably and the viscosity is too high.

    The quality of the hydraulic oil of the hydraulic waste paper Baler has a great influence on the hydraulic pump. The replacement cycle of the plunger pump is generally one year. If the plunger pump is noisy, it is recommended to consider replacing the plunger pump plunger.

    IMG_20190508_075449 拷贝.jpg

    The waste paper baler is used to extrude waste paper and similar products under normal conditions to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. https://www.nickbaler.net


  • The first refueling method of horizontal waste paper baler

    The method of refueling the newly purchased waste paper baler equipment before starting, and the oil leakage problem of the newly purchased horizontal waste paper baler equipment has been plagued by the majority of user groups, so how to solve the problem of the waste paper baler oil Well, let's take a look at the waste paper baler equipment with Nick Machinery. What should I pay attention to when using the refueling method?

    1. The oil leakage of the waste paper baler is relatively severe. If the oil pump pressure is adjusted too high, the wear of the movable parts will increase the sealing gap, the sealing device will be damaged, the viscosity of the oil used in the waste paper baler will be too low, etc., which will increase the leakage. After clarifying the reason, adopt the corresponding steps to eliminate it.

    2. Poor heat dissipation, insufficient heat dissipation area of ??the fuel tank, too little oil storage in the fuel tank, resulting in too fast oil circulation, poor cooling of the waste paper Baler cooler, such as failure of cooling water supply or failure of electric fans, high ambient temperature, etc. All are the reasons for poor heat dissipation.

    3. The system does not have an unloading circuit or the unloading circuit does not perform well. When the waste paper baler system does not need to pressurize the oil, the oil is still overflowing to the fuel tank under the working pressure set by the overflow valve or at the unloading pressure Return to the fuel tank downstream in a higher environment. 

    4. Misuse of oil with too high viscosity, the waste paper baler will cause excessive hydraulic loss.

    3-2废纸 (2).jpg

    The horizontal waste paper baler can be customized in different models according to the different needs of customers.https://www.nickbaler.net

Recommended products
  • Cow dung dewatering machine manufacturers
  • Cow dung dring machine price
  • Cow dung compressor, Cow Dung Block Press
  • NK8060T15 Diesel Engine Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top