The waste paper baler is used to squeeze waste paper,waste paper boxes, waste newspapers and other products under normal conditions,and pack them with special packaging tapes to greatly reduce the volume,so as to reduce transportation volume and save freight.The purpose of increasing efficiency.So,what performance does the waste paper baler require oil?
1.It has good lubrication function. The working fluid in the hydraulic system of the waste paper baler is not only used to transfer energy,but also to lubricate the friction surfaces of the hydraulic components.In some machine tools, the oil source of the machine tool lubrication system comes from the hydraulic system,and the same oil pump is used for the hydraulic system.Therefore,hydraulic oil should have high oil film strength and good lubrication performance within the range of working temperature and pressure changes to avoid dry friction.
2.The quality should be pure and free of impurities.If it contains water,it will reduce the lubrication performance of the waste paper baler oil;if it contains mechanical impurities,it will block the throttle orifice and the valve core will jam;the acid and alkali will corrode the metal and damage the sealing structure;if there are volatile substances,the oil will be trapped The liquid thickens and produces bubbles,which destroys the stability of the transmission.
3.The oil should not be easily oxidized to prevent the production of gums and asphaltenes due to oxidation and deterioration of the oil.The impurities formed by oxides can also block the oil circuit and destroy the normal operation of the waste paper baler system.
4.Where fire prevention is required,the burning point of oil should be high;in cold climates,the freezing point of oil should be low.
5.Non-toxic,no impact on human health.
Now that the application of plastic bottle balers has become more and more extensive, what preparations should we make when applying this product?
Next, let's follow the editor to find out.
The plastic bottle baler works for a long time and reaches a certain service life. In order to make the equipment play the overall value, the old parts need to be replaced. There are several aspects that need attention in the process of replacing the cylinder of the plastic bottle baler.
According to the correct disassembly method, on the one hand, the disassembly process is smooth and not damage the equipment; on the other hand, it is also to take care of safety issues.
Before disassembling the hydraulic cylinder of the mineral water bottle Baler, drain the hydraulic oil in the two chambers of the hydraulic cylinder, then remove the end cover, and then pull out the piston rod and piston for disassembly.
When disassembling the parts, don't beat them forcefully. If it is unavoidable, a copper rod should be used to prevent damage to the parts of the Baler.
Some parts need tools, must use tools, do not beat or pry hard.
Some bolt-fastened parts use thread tightening agent during assembly, which is difficult to disassemble. If disassembling may break the bolts, the exposed part of the bolts can be heated to make the glue fall off before disassembling. .
When disassembling the hydraulic cylinder of the plastic bottle Baler, pay attention to whether there is a hydraulic lock on the cylinder. If so, remove the hydraulic lock first, otherwise there will be pressure from the hydraulic lock in the hydraulic cylinder, which will not only cause difficulty in disassembly, but also easy Cause equipment and personal injury.
When the hydraulic lock is removed, several layers of clean cotton cloth can be used to wrap the connecting part, and then loosen the screw to prevent high-pressure oil from spraying out.
NICKBALER plastic bottle Baling Press machine manufacturers have accumulated mature production technology for many years, and we are committed to providing customers with good service, low-cost and high-quality products. www.nickbaler.net
With the further improvement of our environmental awareness, the utilization rate of beverage bottle Baling Press machines continues to increase.
Individual users ordered beverage bottle Balers that failed due to poor inspections, causing commercial investment failures, production failures and waste of funds.
In order to meet market demand, many manufacturers without production experience and strength are imitating production.
The equipment produced has only appearance, without any substance, and quality cannot be controlled.
Next, let us understand the harmful consequences of not ordering the waste paper baler.
Beverage bottle Balers that cannot be ordered, equipment cannot be used, production cannot be carried out, all investments cannot create value, and the harmful consequences of investment costs cannot be recovered.
For beverage bottle packaging machines, all investments must be at least 300,000 yuan. For ordinary investors, this is definitely not a small amount. It may cause heavy debts and serious bankruptcy consequences.
In view of the serious harmful consequences of the packaging of beverage bottles that are not ordered, you must go to the manufacturer’s site for on-site inspection to determine whether the equipment logo is produced by the manufacturer.
We often encounter customer inquiries about how to choose a horizontal and vertical waste paper baler. What is the difference between the two? Let's analyze this problem for you. Welcome everyone to pay attention.
The vertical waste paper baler is a small-scale baling station or equipment selected in the case of insufficient initial funds. In addition, the vertical baler can pack the waste generated in the production of wool, shreds, rags, etc., and is used on a small scale. The product.
Horizontal waste paper baler is now the mainstream equipment used in waste paper baling stations, which can satisfy more than ten tons of paper per day. Can prepare for future scale expansion.
For raw materials such as yellow cardboard, air-conditioned cartons, etc., you can choose a conventional horizontal waste paper baler, and for raw materials with paper edges, you can choose a small horizontal baler.
If the daily waste paper recycling business volume is large, it is wise to choose a horizontal baler. If the business volume is small, it is recommended to choose a vertical waste paper baler to save the purchase cost.