News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
Installation and debugging method of waste paper baler
Author : admin Time : 20-09-07 AllPageView : 233

The horizontal waste paper baler is a hydraulic compression baler that is better for us to deal with fluffy materials such as waste paper shells,cardboard,paper scraps,etc.It can ensure that the finished paper bales of the baler are tidy,which is conducive to storage,transportation and handling. 

But how much can you know about installing and debugging the Compactor Baler?

1.Installation of the baler machine:Choose a horizontal position when installing the baler,and the baler should not be installed in direct sunlight.Installing the baler in a well-ventilated environment is conducive to the heat dissipation of the baler during work.

2.Test of the power supply of the Compactor Baler:Install the Compactor Baler's power supply according to the manual of the Compactor Baler,and then turn on the main switch of the Compactor Baler to check whether the Compactor Baler can start normally.

废纸1.jpg

3.Debugging of the baler machine:After the power supply is notified,start to check the machine.First,adjust the speed of the baler to the bottom position,turn on the switch,and test to see if the baler can work normally.

After the Compactor Baler is running,test whether the performance of each switch of the Compactor Baler can operate normally,and whether each device is abnormal in its work.

The Nick brand waste paper baler is simple to operate and automatically discharges the bale,which improves work efficiency.The installation of emergency stop settings makes the operation safer and perfect after-sales.


Recommended news
  • Preparation of plastic bottle Baling Press machine

    Now that the application of plastic bottle balers has become more and more extensive, what preparations should we make when applying this product?

    Next, let's follow the editor to find out.

    The plastic bottle baler works for a long time and reaches a certain service life. In order to make the equipment play the overall value, the old parts need to be replaced. There are several aspects that need attention in the process of replacing the cylinder of the plastic bottle baler.

    According to the correct disassembly method, on the one hand, the disassembly process is smooth and not damage the equipment; on the other hand, it is also to take care of safety issues.

    Before disassembling the hydraulic cylinder of the mineral water bottle Baler, drain the hydraulic oil in the two chambers of the hydraulic cylinder, then remove the end cover, and then pull out the piston rod and piston for disassembly.

    When disassembling the parts, don't beat them forcefully. If it is unavoidable, a copper rod should be used to prevent damage to the parts of the Baler.

    Some parts need tools, must use tools, do not beat or pry hard.

    Some bolt-fastened parts use thread tightening agent during assembly, which is difficult to disassemble. If disassembling may break the bolts, the exposed part of the bolts can be heated to make the glue fall off before disassembling. .

    When disassembling the hydraulic cylinder of the plastic bottle Baler, pay attention to whether there is a hydraulic lock on the cylinder. If so, remove the hydraulic lock first, otherwise there will be pressure from the hydraulic lock in the hydraulic cylinder, which will not only cause difficulty in disassembly, but also easy Cause equipment and personal injury.

    net.jpg

    When the hydraulic lock is removed, several layers of clean cotton cloth can be used to wrap the connecting part, and then loosen the screw to prevent high-pressure oil from spraying out.

    NICKBALER plastic bottle Baling Press machine manufacturers have accumulated mature production technology for many years, and we are committed to providing customers with good service, low-cost and high-quality products. www.nickbaler.net


  • Disadvantages of unqualified beverage bottle Baling Press machine

    With the further improvement of our environmental awareness, the utilization rate of beverage bottle Baling Press machines continues to increase.

    Individual users ordered beverage bottle Balers that failed due to poor inspections, causing commercial investment failures, production failures and waste of funds.

    In order to meet market demand, many manufacturers without production experience and strength are imitating production. 

    The equipment produced has only appearance, without any substance, and quality cannot be controlled.

    Next, let us understand the harmful consequences of not ordering the waste paper baler.

    Beverage bottle Balers that cannot be ordered, equipment cannot be used, production cannot be carried out, all investments cannot create value, and the harmful consequences of investment costs cannot be recovered.

    For beverage bottle packaging machines, all investments must be at least 300,000 yuan. For ordinary investors, this is definitely not a small amount. It may cause heavy debts and serious bankruptcy consequences.

    net2-2.jpg

    In view of the serious harmful consequences of the packaging of beverage bottles that are not ordered, you must go to the manufacturer’s site for on-site inspection to determine whether the equipment logo is produced by the manufacturer.

    NICKBALER recommends that you shop around when choosing a beverage bottle Baler, and don't choose an unqualified Baler because of the low price, so as not to cause serious losses. www.nickbaler.net

  • Selection of waste paper baler

    We often encounter customer inquiries about how to choose a horizontal and vertical waste paper baler. What is the difference between the two? Let's analyze this problem for you. Welcome everyone to pay attention.

    The vertical waste paper baler is a small-scale baling station or equipment selected in the case of insufficient initial funds. In addition, the vertical baler can pack the waste generated in the production of wool, shreds, rags, etc., and is used on a small scale. The product.

    Horizontal waste paper baler is now the mainstream equipment used in waste paper baling stations, which can satisfy more than ten tons of paper per day. Can prepare for future scale expansion.

    For raw materials such as yellow cardboard, air-conditioned cartons, etc., you can choose a conventional horizontal waste paper baler, and for raw materials with paper edges, you can choose a small horizontal baler.

    net 1 2.jpg

    If the daily waste paper recycling business volume is large, it is wise to choose a horizontal baler. If the business volume is small, it is recommended to choose a vertical waste paper baler to save the purchase cost.

    Both NICKBALER waste paper balers have their own use occasions and advantages, and users can choose according to production needs. www.nickbaler.net


Recommended products
  • Cow dung compressor, Cow Dung Block Press
  • NK8060T15 Diesel Engine Baler
  • Wood Shaving Bedding Machine
  • PET Bottle Baling Press Nick Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top