News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
Safe operation of metal shears
Author : admin Time : 20-09-08 AllPageView : 321

The metal shearing machine is suitable for metal recycling companies,scrap steel plants, smelting and foundry enterprises to perform cold shearing on various shapes of steel and various metal structures to add qualified charge.

The safe operation of the metal shearing machine is as follows:

1.The metal shear equipment should be operated by a dedicated person,and other people are not allowed to use it without training.

2.Before starting the machine,check whether all parts are normal and whether the fasteners are firm.  

3.It is forbidden to cut unannealed steel parts,cast iron parts,soft metal parts,over-thin parts,parts less than 100 mm in length,and parts that exceed the length of the scissors. 

剪贴2.jpg 

4.During operation,the human body is not allowed to approach the transmission part and the knife edge of the equipment, and attention should be paid to the safety of the surrounding personnel to prevent the material from lifting up and hurting people.When cutting,cut the material as close as possible to the inside of the knife.When cutting short materials,do not use hand-held workpieces to feed materials,but use clamps to feed material  

5. When the metal shearing machine is running,the operator shall not leave the post without authorization,and the power supply shall be cut off when the work is completed or temporarily leaving the post.

Nick brand metal baler is easy to operate safe and energy-saving,it is your best helper.

Recommended news
Recommended products
  • Vertical Scrap Briquetting Press
  • Cow Dung Dewatering Machine Manufacturers
  • Cow Dung Dring Machine Price
  • Cow Dung Compressor Supplier
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • Tony.wang@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top