The straw Baling Machine is a recycling and compression baling machine specially used for waste paper,waste cardboard,carton factory scraps,waste books,waste magazines,plastic film,straw and other loose materials.It can reduce the volume and facilitate transportation.
So,how to maintain the straw Baling Machine?
1.Before starting the machine,please inject 25 kg of gear oil(one time refueling can be used continuously for more than 10 years),and tighten the oil filler plug after refueling.
2.Check the power lines carefully to prevent trouble spots and leakage,and ensure that the electrical level is safe.
3.Carefully check whether the bolts and screws of the connecting parts of the machine motor and transmission parts can be consolidated and whether there is any looseness in order to fasten them in time.
4.Set the preheating temperature according to the species.Corn and wheat stalks are between 80°C and 90°C,and peanut husks and rice husks are between 80°C and 100°C.
5.After turning on the machine,run it idling for 1 minute,check whether the machine can rotate normally,and then feed a small amount of material when it is normal,and load the material evenly after the remaining material in the standby device is clean.
6.Before loading,please pay attention to the hard sundries in the raw materials,and prevent stones and iron from entering the silo to avoid damage to the machine.
7.It is necessary to add oil to the oil filling space on the universal joint every 8 hours of operation,and 2-3 drops of oil at a time are sufficient.Please load a little wet material before stopping,so that the material can be discharged smoothly after starting the next day.
Nick brand straw Baling Machine has simple structure,small volume, simple daily operation and maintenance,convenient transportation and storage,continuous operation,high efficiency
1. Automatic control mode, install the interlock switch
2. Independently install emergency stop button, which can stop emergency at any time in any state to ensure safety;
3. The pressure plate adopts the guide groove type balance to effectively prevent the tilt;
4. Hook type automatic package turning, easy to install;
5. Quickly lock and loosen the device, install it well and quickly.
Nick Machinery has rich production experience and integrated service. Using our baler can greatly improve work efficiency and reduce human and financial expenditure. Contact us at 86-29-86031588 or https://www.nickbaler.net
The automatic waste paper baler is a completely unmanned operation and is suitable for places with a lot of materials. After the articles are compressed and bundled, they are easy to store and stack and reduce transportation costs. The unique automatic strapping device of the automatic waste paper baler is fast, simple in structure, stable in action, low in failure rate and easy to maintain. The automatic waste paper baler is suitable for waste paper cartons, plastics, fabrics and large garbage disposal places.
The automatic waste paper baler is to increase profit margins for employees, reduce labor, and improve work efficiency.
The automatic waste paper baler production line is composed of the main machine, conveyor, hopper, and air cooling system.
The automatic waste paper baler has stable performance, high cost performance, simple operation and good safety performance. It is suitable for Baler all kinds of waste cardboard, waste paper boxes, waste paper shells, waste paper barrels, waste paper edges, waste plastics, and other waste garbage into blocks to achieve cost saving and convenient transportation.
The shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, cold shearing, pressing and flanging of various shapes of steel and various metal materials, as well as powdered products, plastics, glass steel, insulation Material and rubber compression molding. Let's take a look at what are the characteristics of the shearing machine?
1. The closed steel plate structure eliminates and reduces any side twisting or bending deformation.
2. The blade design improves productivity, and it is convenient to replace the blade, which can reduce the downtime of mechanical failure and optimize the productivity.
3. PLC hand-automatic control box. It can be installed and replaced manually and automatically. With remote control operation, it can realize remote start, stop and automatic operation.
4. Pushing trough with gland: It can realize automatic feeding, and the material will be cut along the gland and pushed into the main shearing machine.
5. The hydraulic system adopts advanced cartridge valve or slide valve system control, and implements a hydraulic press with button centralized operation.
Nick mechanical shears are suitable for metal recycling companies, scrap steel mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures. 86-29-86031588