The waste paper hydraulic baling machine has a wide range of uses.It can pack loose items such as waste paper,waste paper boxes,straw,straw,etc.,to facilitate transportation and save space,making it an indispensable equipment for many industries.
So do you know the reason for the heating of the hydraulic oil of the waste paper hydraulic baling machine?Today Nick Machinery will give you an explanation.
1.The accuracy of the components and the quality of the equipment are poor.The mechanical conflict between relative motions is too large,the planned structure of the hydraulic components in the system is unreasonable,and the production quality is poor.
The unloading circuit in the system is faulty.Perhaps because the unloading circuit is not set,the oil pump cannot unload when the operation is stopped.The entire flow of the pump overflows under high pressure,and the overflow rate generates heat,which causes the oil to heat up.
2.Select the fixed pump oil supply system of the oil pump capacity according to the fast forward speed.During operation,most of the remaining flow will overflow from the overflow valve under high pressure and generate heat.The standard selection of hydraulic components in the hydraulic system is unreasonable.
If the standard is too small,the formation energy will lose too much and cause the system to heat up,or the flow rate will be too high and cause noise.When the pump flow is too large when the pump is selected,the remaining oil will overflow from the overflow valve and cause heat.
It is recommended that you choose high-quality equipment,so as to improve production and better serve you.Recommended here is Nick Machinery's waste paper hydraulic baling machine,which is of good quality,good quality,simple structure and easy to operate.
1. Automatic control mode, install the interlock switch
2. Independently install emergency stop button, which can stop emergency at any time in any state to ensure safety;
3. The pressure plate adopts the guide groove type balance to effectively prevent the tilt;
4. Hook type automatic package turning, easy to install;
5. Quickly lock and loosen the device, install it well and quickly.
Nick Machinery has rich production experience and integrated service. Using our baler can greatly improve work efficiency and reduce human and financial expenditure. Contact us at 86-29-86031588 or https://www.nickbaler.net
The automatic waste paper baler is a completely unmanned operation and is suitable for places with a lot of materials. After the articles are compressed and bundled, they are easy to store and stack and reduce transportation costs. The unique automatic strapping device of the automatic waste paper baler is fast, simple in structure, stable in action, low in failure rate and easy to maintain. The automatic waste paper baler is suitable for waste paper cartons, plastics, fabrics and large garbage disposal places.
The automatic waste paper baler is to increase profit margins for employees, reduce labor, and improve work efficiency.
The automatic waste paper baler production line is composed of the main machine, conveyor, hopper, and air cooling system.
The automatic waste paper baler has stable performance, high cost performance, simple operation and good safety performance. It is suitable for Baler all kinds of waste cardboard, waste paper boxes, waste paper shells, waste paper barrels, waste paper edges, waste plastics, and other waste garbage into blocks to achieve cost saving and convenient transportation.
The shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, cold shearing, pressing and flanging of various shapes of steel and various metal materials, as well as powdered products, plastics, glass steel, insulation Material and rubber compression molding. Let's take a look at what are the characteristics of the shearing machine?
1. The closed steel plate structure eliminates and reduces any side twisting or bending deformation.
2. The blade design improves productivity, and it is convenient to replace the blade, which can reduce the downtime of mechanical failure and optimize the productivity.
3. PLC hand-automatic control box. It can be installed and replaced manually and automatically. With remote control operation, it can realize remote start, stop and automatic operation.
4. Pushing trough with gland: It can realize automatic feeding, and the material will be cut along the gland and pushed into the main shearing machine.
5. The hydraulic system adopts advanced cartridge valve or slide valve system control, and implements a hydraulic press with button centralized operation.
Nick mechanical shears are suitable for metal recycling companies, scrap steel mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures. 86-29-86031588