News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
The vertical hydraulic Heavy Duty Baler
Author : admin Time : 20-10-09 AllPageView : 194

When the vertical hydraulic Heavy Duty Baler is used for a long time,the battery may have some problems,so you must be cautious when using the battery of the vertical hydraulic Heavy Duty Baler.

If you don't know this well,then,our Nick Machinery will share with you common knowledge about the battery usage of the vertical hydraulic Heavy Duty Baler

I hope you can read it carefully and look forward to your attention.

1.The new battery must be charged for 12 hours after the battery has cooled down 3 to 5 times before the battery is used up.Only after the first 3 to 5 times of repeated charging and discharging can the battery exert its normal larger power.

2.The different voltage changes in various regions will affect the length of charging time.The high temperature of the battery or charger will reduce the charging efficiency and cause the battery to not be fully charged.Therefore,it is recommended that customers should charge in an environment of 10-40 degrees Celsius when charging,and install a regulated power supply before the charger.

1.jpg

3.To avoid short circuit of the battery,do not store it with metal objects.The positive and negative electrodes of the battery cannot be connected in any way.Do not open the battery case to keep the battery dry forever.

4.When the machine is not in use,please remove the battery of the vertical hydraulic packer to avoid rapid power loss.A fully charged battery will lose its power completely after about 1 to 2 months.In order to extend the battery life of the automatic hydraulic Heavy Duty Baler,please install the removed battery on the machine to use up the remaining power,and confirm that the battery power is used up(red light is on) before charging.

The above is the usage method of the vertical hydraulic Heavy Duty Baler battery,I hope it will be helpful to you.

If you have more questions,please open our Nick Heavy Duty Baler company's website:www.nickbaler.net, or call:86-29-86031588


Recommended news
  • Precautions for Australian textile balers

    The textile packing machine force is widely used in various garment factories, garment recycling stations and other units and enterprises. It is suitable for packing and recycling textiles and fabric strips. It is a good equipment to improve labor efficiency, reduce labor intensity, and reduce transportation costs.

    Precautions for textile baler:

    1. Pay attention to the grounding of the power cord, lightning protection, rain protection and moisture protection.

    2. It is forbidden to use the hydraulic packing electric control cabinet by non-operators.

    3. Pay attention to the antifreeze work of the motor and the long-term overload of the motor. Effective prevention of these two can reduce the damage of the motor and maintain the normal packaging of the textile baler.

    4. Pay attention to the button operation of the console. Don't use too much force on the switch button, and prevent misoperation to avoid damage caused by short circuit.

    cc561b38ee076be9aa635a9ef866467 拷贝.jpg

    NICKBALER clothing baler is based on market demand. The products start from simple and reasonable energy saving and pay attention to practicability, so as to serve more new and old customers. www.nickbaler.net

  • American clothing packing machine supplier

    The dedicated vertical garment packing machine is divided into two kinds of single oil cylinder and double oil cylinder. It is mainly used for compressing and packing various garments, which is quick and easy to pack.

    It is widely used for compression packaging of various garments such as cloth, textiles, sweaters, shirts, sweaters, underwear, socks, and export garments.

    All doors of the equipment can be opened, and the packing is convenient. It adopts hydraulic manual control. It has the characteristics of simple operation, high packing efficiency, low investment cost, and multiple selection of pressing plate stroke parameters.

    The ideal effect can be achieved by selecting the pressing plate stroke for compressing various garments. The inner box can be made of stainless steel, which saves manpower, improves labor efficiency, reduces labor intensity, and reduces transportation costs.

    5-2服装.jpg

    NICKBALER is a professional service manufacturer specializing in the development, production, sales and service of hydraulic machinery and packaging machinery. www.nickbaler.net

  • Preparation of plastic bottle Baling Press machine

    Now that the application of plastic bottle balers has become more and more extensive, what preparations should we make when applying this product?

    Next, let's follow the editor to find out.

    The plastic bottle baler works for a long time and reaches a certain service life. In order to make the equipment play the overall value, the old parts need to be replaced. There are several aspects that need attention in the process of replacing the cylinder of the plastic bottle baler.

    According to the correct disassembly method, on the one hand, the disassembly process is smooth and not damage the equipment; on the other hand, it is also to take care of safety issues.

    Before disassembling the hydraulic cylinder of the mineral water bottle Baler, drain the hydraulic oil in the two chambers of the hydraulic cylinder, then remove the end cover, and then pull out the piston rod and piston for disassembly.

    When disassembling the parts, don't beat them forcefully. If it is unavoidable, a copper rod should be used to prevent damage to the parts of the Baler.

    Some parts need tools, must use tools, do not beat or pry hard.

    Some bolt-fastened parts use thread tightening agent during assembly, which is difficult to disassemble. If disassembling may break the bolts, the exposed part of the bolts can be heated to make the glue fall off before disassembling. .

    When disassembling the hydraulic cylinder of the plastic bottle Baler, pay attention to whether there is a hydraulic lock on the cylinder. If so, remove the hydraulic lock first, otherwise there will be pressure from the hydraulic lock in the hydraulic cylinder, which will not only cause difficulty in disassembly, but also easy Cause equipment and personal injury.

    net.jpg

    When the hydraulic lock is removed, several layers of clean cotton cloth can be used to wrap the connecting part, and then loosen the screw to prevent high-pressure oil from spraying out.

    NICKBALER plastic bottle Baling Press machine manufacturers have accumulated mature production technology for many years, and we are committed to providing customers with good service, low-cost and high-quality products. www.nickbaler.net


Recommended products
  • Cow dung compressor, Cow Dung Block Press
  • NK8060T15 Diesel Engine Baler
  • Wood Shaving Bedding Machine
  • PET Bottle Baling Press Nick Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top