There are precautions during use of any type of vertical baling machine.This is not only to improve its work efficiency,but more importantly to ensure the safety of human beings. Let’s introduce to you the use of the lower horizontal waste paper vertical baling machine.Various precautions in the process.
1.Pay attention to the production power of the waste paper vertical baling machine.If the transformer is used together for time,the use of excess power will not only cause the equipment's motor to burn out, but also easily cause fire.
2.The equipment ground wire must be installed correctly.If the ground wire is not connected correctly,there is a danger of electric shock.
3.Try not to exceed 10M when using extension cords.
4.Please be sure to use gloves,protective glasses and masks when installing the equipment or when producing the vertical baling machine.
5.Waste paper vertical baling machine is a professional equipment for compressing waste paper and plastic bottles and other soft materials.Do not use for other purposes.Do not put your hands or body close to the main unit.
6.Do not remove the panel,cover,door and other parts of the baling machine while using the machine.When removing the protective parts, it will not only cause the machine to malfunction,but also easily lead to accidents.Do not modify the machine privately.
7.Do not place the power cord in the forklift and other passages,or avoid directly pressing the power cord and other places.
8.Do not use wet hands to plug in and out the power plug,there is a danger of electric shock. Packing items with water or dampness may cause electric shock.
9.When not in use,the plug on the socket must be unplugged.Cut off the power to avoid electric shock or fire caused by leakage.
10.When the heating plate is at a very high temperature,please do not put combustible materials around the back of the machine,as there is a risk of fire.
For your safety,please follow the requirements.
Nick brand waste paper vertical baling machine has simple structure,stable action, simple operation,low failure rate and easy cleaning and maintenance.It is a good helper for your production.
Website: www.nickbaler.net,or call:86-29-86031588
1. Automatic control mode, install the interlock switch
2. Independently install emergency stop button, which can stop emergency at any time in any state to ensure safety;
3. The pressure plate adopts the guide groove type balance to effectively prevent the tilt;
4. Hook type automatic package turning, easy to install;
5. Quickly lock and loosen the device, install it well and quickly.
Nick Machinery has rich production experience and integrated service. Using our baler can greatly improve work efficiency and reduce human and financial expenditure. Contact us at 86-29-86031588 or https://www.nickbaler.net
The automatic waste paper baler is a completely unmanned operation and is suitable for places with a lot of materials. After the articles are compressed and bundled, they are easy to store and stack and reduce transportation costs. The unique automatic strapping device of the automatic waste paper baler is fast, simple in structure, stable in action, low in failure rate and easy to maintain. The automatic waste paper baler is suitable for waste paper cartons, plastics, fabrics and large garbage disposal places.
The automatic waste paper baler is to increase profit margins for employees, reduce labor, and improve work efficiency.
The automatic waste paper baler production line is composed of the main machine, conveyor, hopper, and air cooling system.
The automatic waste paper baler has stable performance, high cost performance, simple operation and good safety performance. It is suitable for Baler all kinds of waste cardboard, waste paper boxes, waste paper shells, waste paper barrels, waste paper edges, waste plastics, and other waste garbage into blocks to achieve cost saving and convenient transportation.
The shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, cold shearing, pressing and flanging of various shapes of steel and various metal materials, as well as powdered products, plastics, glass steel, insulation Material and rubber compression molding. Let's take a look at what are the characteristics of the shearing machine?
1. The closed steel plate structure eliminates and reduces any side twisting or bending deformation.
2. The blade design improves productivity, and it is convenient to replace the blade, which can reduce the downtime of mechanical failure and optimize the productivity.
3. PLC hand-automatic control box. It can be installed and replaced manually and automatically. With remote control operation, it can realize remote start, stop and automatic operation.
4. Pushing trough with gland: It can realize automatic feeding, and the material will be cut along the gland and pushed into the main shearing machine.
5. The hydraulic system adopts advanced cartridge valve or slide valve system control, and implements a hydraulic press with button centralized operation.
Nick mechanical shears are suitable for metal recycling companies, scrap steel mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures. 86-29-86031588