The first effective use of wheat straw is to return it directly to the field after being crushed by a harvester.In this way,it can improve the structure of the soil and increase nutrition,which is beneficial to the next crop planting.Soare there other uses?
1.Livestock breeding.After the wheat is harvested,the wheat stalks remain useless in the field,and burning pollutes the environment.However,wheat stalks can also be recycled and used as feed for cattle and sheep to eat,which can reduce the purchase of a large amount of grains.Wheat stalks contain a lot of trace elements needed by livestock.After eating,cattle and sheep can supplement their needs while helping them to Food digestion.
2.After the wheat straw is collected,it can be sold to a manufacturer of plates or new materials.For example,the production of wood-plastic materials requires wheat straw as part of the raw material.
3.Used to make paper.Both wood and crop stalks can be used to make paper,but in the face of the increasing shortage of wood raw materials,wheat stalks are a good raw material and can be used by most manufacturers.
4.Fermentation bed pig raising technology can also use wheat straw,which not only degrades pig excrement and converts it into bacterial protein for pigs to eat,but also provides nutrition for it.The house has no odor,less mosquitoes and fresh environment.Solve the problem of difficult disposal of pig manure.
5.Wheat straw as a new energy source.As an energy source,straw needs to be further processed,such as making biomass pellets,combustible gas,etc.At present,as a new energy source,it is mainly used in these two aspects.The production process of biomass pellets is through a straw pellet machine and pressed into diameter It is 8mm round cylindrical pellets,or is compressed into 30mmX30mm block pellets by a straw briquetting machine.These pellets can be used as feed to increase the feed intake of livestock,and can also be used as a new energy alternative to coal.Its main sales location is urban In places where coal is needed,such as boiler houses and power plants,the income is quite substantial.
The Nick brand straw briquetting machine is easy to operate and continuous out of the bale,which can be directly transported,which is convenient and fast.
Web:www.nickbaler.net,Tel:+86-29-8631588
1. Shearing oil cylinder: It is a double-acting single-piston rod type oil cylinder. Its front end is connected with the frame, and the rear part is connected with the machine base by lower pins (one on each side), and the frame shaft is driven by the push-out and retraction of the piston rod. swing. Implement the cutting action.
2 Frames: The frame is an important flowing part. The left side of the front part is equipped with an upper shear. The middle is connected with the frame by the frame shaft and frame bushing, and the rear is connected with the upper pin shaft of the shear cylinder. .
3. Machine base: It is composed of welding base, left frame, right frame, etc. The right frame and the left frame of the base are welded parts, of which the right and left frames use inner and outer (double) side plates, and the structure is firm.
4. There is a platform and a slope at the front of the machine base, and a lower shear is installed between them. There is a large hole in the middle of the left and right frames for installing the frame, and there is a hole in the rear for installing the shearing cylinder. The front part of the frame is welded with a pressure material cylinder bracket, which is used to install the pressure material cylinder and other portal metal shears.
NICKBALER has rich production experience and integrated services. Using our balers can greatly improve work efficiency and reduce human and financial expenditures. Contact us at 86-29-86031588 or https://www.nkbaler.net/.
The semi-automatic plastic bottle Baling machine is mainly used for Baling machinewaste products, but because it is semi-automatic packing, it needs to be worn manually. Many friends do not know how to operate it. NKBALER has summarized the following points based on experience , I hope it can help everyone.
Semi-automatic plastic bottle Baling machine strapping method:
1. Install the pp tape on the pp tape mounting roller.
2. There is a brake pad connected to the "L"-shaped metal rod on the roller and the fuselage. There are two white rollers on the metal rod. middle.
3. After the upper and lower extensions are inserted, press the connecting spring on the front of the upper extension (the machine is turned on at this time).Line packing.
The above is the method of wearing the semi-automatic plastic bottle baler. I believe that through the introduction, everyone has a deeper understanding of how to operate the plastic baler. If you have other questions, you can leave a message for consultation.https://www.nkbaler.net/.
The electrical control part of the waste paper baler is mainly composed of PLC, motor and electrical components of relays and switches. The most vulnerable parts of these parts are the motor and electrical components. Today we share with you: baler electrical control Box Daily Precautions
1. Pay attention to the grounding, lightning protection, rainproof and moisture-proof of the power cord.
2. Non-professional operators of the electric control cabinet are prohibited from using it.
3. Pay attention to the antifreeze work of the motor and the long-term overload of the motor. Effective prevention of these two items can greatly reduce the damage to the motor, thereby maintaining the normal Baling machineof the waste paper baler.
4. Pay attention to the button operation of the console part, do not use too much force on the switch button, and prevent misoperation to avoid damage caused by short circuit.
The above 4 points are what I want to share with you today, I hope it can help you!
NKBALER provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other Baling machineequipment, company website: https://www.nkbaler.net/. Tel: 86-29-86031588, looking forward to contacting your cooperation!