We are now in terms of straw hydraulic balers work efficiency has been very high, but a variety of straw hydraulic balers also have its dependency factors, for example, for the dry storage of straw for packaging efficiency will be greatly improved.
The first is a large area of straw is difficult to store the occupied area is relatively large, we have to classify him packaged, and then in the storage, thus reducing the straw storage burden, which greatly reduces the burden of straw storage, but also It is this difficult to store because of the very large welfare of our peasant brothers. It is this way that our straw has a dry process, through a number of links, and then in the packaging process, so greatly improved The efficiency of packaging for our baler is played a protective role, and let our straw after a long period of storage will not be metamorphosed.
We have studied the storage problem in this area, dry straw so that our packaging efficiency to enhance a lot do not say that also greatly improve the performance of our packaging machinery, if the wet straw will not only reduce the efficiency will damage the machinery.
The above is the dry straw on a variety of straw hydraulic balers to improve the efficiency of production, we have a professional straw balers after-sales service team, please rest assured that we trust, let our friends know more about it, understand it, To better play its performance. If you have a need, please contact: www.nickbaler.com
The hydraulic baler mainly uses the hydraulic cylinder to "output" objects, but once the hydraulic cylinder has a problem, it will not only affect the normal use, but also need to determine the fault. Today, some customers responded that the hydraulic baler oil cylinder could not go up and down, as if it was stuck. What is the cause? How can we trouble shoot the problem?
First check the hydraulic baler oil cylinder and eliminate it step by step as follows:
1.First find a pressure gauge to check the pressure in the valve? And know the stroke and working pressure of the hydraulic cylinder.
2.Check each fitting on the hydraulic valve block for oil seepage or leakage. And know if the manual generation or the control generation is working properly.
3.Whether the load when the hydraulic cylinder is loaded is abnormal.
4.To remove the above is to see if the working pressure of the overflow raft is low, and then adjust it.
5.If none of the above is to consider whether the cylinder is stuck or there is an obstruction in the valve block.
NICKBALER machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other baling machine equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!
How to choose the type to process 10 tons of waste paper every day?
First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;
If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?
1. The architecture is different
2. Different packing methods
3. The output is different
Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net
1. String the baling pressrope of the hydraulic baler through the automatic spring tightening device behind the garbage compressor, and place it along the baling pressbelt groove, then tie the baling press belt to the pull-stop at the bottom of the baling pressgroove, and rotate the automatic spring tightening device 90 degrees , close the bottom door and lock
2. Put the recycled waste paper, plastic and film waste into the hydraulic baler. When the material is loaded to the height of the pressure plate, close the door tightly and press the "press down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door)
3. The pressure plate moves down and compresses to the maximum pressure and automatically returns to the fully open position. When compressing the baling pressconstraints, the platen stops at the preset position of the compressed material
4. Open the door of the device and pass the tie rope through the bottom wire groove from front to back and back to the front through the pressure plate wire groove. Tighten the tie rope by hand and tie a knot. Push the baling press rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "Up" button, the return trip of the oil cylinder will automatically turn out the bundled bundles. (When opening the lower door, it is not allowed to go in front of the door。
Stand up to avoid accidental injury from the door popping open)
5. After the bale is ejected, reset the bale rod to press down. Finally, remove the bales of waste paper and plastic waste before stacking them for storage, close and lock the door and enter the next packaging cycle task
The hydraulic baler produced by NICKBALER has a simple structure, stable operation, low failure rate and easy cleaning and maintenance. You are welcome to buy https://www.nickbaler.net