Nick brand waste paper baler has an unmanned operating system, automatic bundling, fast speed, simple structure and stable action. It is a good helper for your production.
The waste paper baler is specially used for the recovery, compression and Baler of waste paper, waste cardboard, carton factory scraps, waste books, waste magazines, plastic film, straw and other loose materials, which is easy to store and transport.
Let's follow Nick Machinery to understand from which three aspects we have increased the steady growth of waste paper baler sales?
1. Improve the pre-sales and after-sales service of the baler. After-sales service is also one of the means of enterprise competition. It is a very effective way to maintain the corporate brand effect. This can not only greatly increase the corporate reputation, but also establish us In order to achieve a more scientific sales method, a good reputation is an intangible asset of an enterprise.
2. Analyze the current waste paper baler market and make correct market judgments. Only by providing customers with cost-effective and high-quality waste paper box baler equipment can they continue to win the favor of consumers and the sales market Only when the growth rate is stable can it remain stable.
3. Continuously develop and research new and highly automated waste paper baler products, which are similar to the development of the company. Only by constantly seeking new and good products can the company's waste paper baler products be marketed. Frontier, so as to gain an advantage in market competition and win more new customers.
Nick Machinery provides: waste paper baler, metal baler, straw baler and other packaging equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!
Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.
Common causes of failure: the overflow valve fails, and the oil pump is not working properly.
Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.
1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.
2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.
Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nickbaler.net
The oil pump of the horizontal waste paper baler generally has a plunger pump and a vane pump. The reasons for the loud noise of the oil pump system may include: loosening of the fastening screws of the oil pump; wear of the power bearing or stator of the oil pump; serious damage to the oil pump; inside the oil tank Air bubbles, poor oil intake of the hydraulic pump and other reasons will cause this problem. At this time, we should analyze the specific situation and solve the problem of excessive noise in the hydraulic waste paper baler oil pump!
The possible causes of the failure of the oil pump overheating problem are that the oil pipe is blocked, causing the pressure of the hydraulic oil to increase; the power of the oil pump is too large and overloaded; the hydraulic oil is used unreasonably and the viscosity is too high.
The quality of the hydraulic oil of the hydraulic waste paper Baler has a great influence on the hydraulic pump. The replacement cycle of the plunger pump is generally one year. If the plunger pump is noisy, it is recommended to consider replacing the plunger pump plunger.
The waste paper baler is used to extrude waste paper and similar products under normal conditions to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. https://www.nickbaler.net
The method of refueling the newly purchased waste paper baler equipment before starting, and the oil leakage problem of the newly purchased horizontal waste paper baler equipment has been plagued by the majority of user groups, so how to solve the problem of the waste paper baler oil Well, let's take a look at the waste paper baler equipment with Nick Machinery. What should I pay attention to when using the refueling method?
1. The oil leakage of the waste paper baler is relatively severe. If the oil pump pressure is adjusted too high, the wear of the movable parts will increase the sealing gap, the sealing device will be damaged, the viscosity of the oil used in the waste paper baler will be too low, etc., which will increase the leakage. After clarifying the reason, adopt the corresponding steps to eliminate it.
2. Poor heat dissipation, insufficient heat dissipation area of ??the fuel tank, too little oil storage in the fuel tank, resulting in too fast oil circulation, poor cooling of the waste paper Baler cooler, such as failure of cooling water supply or failure of electric fans, high ambient temperature, etc. All are the reasons for poor heat dissipation.
3. The system does not have an unloading circuit or the unloading circuit does not perform well. When the waste paper baler system does not need to pressurize the oil, the oil is still overflowing to the fuel tank under the working pressure set by the overflow valve or at the unloading pressure Return to the fuel tank downstream in a higher environment.
4. Misuse of oil with too high viscosity, the waste paper baler will cause excessive hydraulic loss.