News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
Waste paper baler supply and demand receives the impact of logistics after the Spring Festival
Author : admin Time : 20-02-13 AllPageView : 762

Affected by the prolongation of the Spring Festival holiday, the operating rate of paper enterprises is not high, and downstream enterprises are still in a state of rest.
In terms of logistics: transportation is blocked, and the new order volume is not large. At present, most local production enterprises resume work in accordance with the postponement plan, but the possibility of postponing the resumption of production in some regional production companies will not be ruled out.
In terms of raw materials: most baling stations have slow resumption of work, and domestic baling stations have a low rate of resumption, and paper mills' procurement enthusiasm and arrival volume are relatively low. Affected by the simultaneous delay in supply and demand in the waste paper market, the current price of waste paper is temporarily stable. The amount of approval for waste is reduced, and it is also in the off-season of seasonal trading. Most domestic paper mills choose to wait and see.
On the supply side: Delaying the start of the paper mill has reduced the supply of finished paper to a certain extent, but some traders and downstream customers have been actively preparing for the warehouse before the holiday. In addition, during the Spring Festival, the production lines of large-scale enterprises normally schedule or rotate production, and corrugated box board. The overall supply of the paper market is still relatively sufficient, and the base paper inventory of enterprises that regularly schedule production and rotate production has increased slightly.
On the demand side: the holiday market is mainly closed, and downstream demand recovery is relatively slow after the holiday. Coupled with poor logistics and transportation, paper mills mainly focus on small-scale supply in the surrounding area, and mainly to protect the packaging needs of medical supplies. The overall market demand recovery will take time.
It is expected that in the short term, the corrugated and containerboard market will continue to run lightly and steadily. As downstream demand gradually recovers, the end of February or early March may usher in a small-scale outbreak, but the duration is expected to be short. Therefore, the price of corrugated and containerboard is expected to increase slightly.

Recommended news
  • Features of MSW Baling Press Machine

    1. The structure of the hydraulic MSW horizontal baler is mainly closed-door and open-door structure. The closed-door structure can make the density of the bales larger, which is suitable for the compression and baling machine of more items, hydraulic opening and closing, manual bundling, safe and fast operation.Open door structure, both sides are locked, continuous delivery, automatic threading (wire) or hooking (wire), automatic bundling, and faster operation.

    2. Imported PLC programming, LCD screen, simple, clear and clear at a glance.

    3. The connection method of the ball joint hydraulic cylinder is not prone to failure and increases the use time of the cylinder.

    4. Thickened steel plate, the fuselage is firmer.

    5. The oil circuit is standardized, and the hydraulic oil pipe hose is rarely used, which avoids the oil leakage phenomenon caused by the loosening of the screw due to the vibration of the machine, and also reduces the potential safety hazard.

    6. A variety of operation methods.

    7. Energy saving, low noise.

    mmexport1560419350147 拷贝.png

    All of NICKBALER Machinery's balers can do the job you need and are very easy to operate. If you have any questions, you can go to NICKBALER's website to learn.https://www.nickbaler.net.


  • NK-T90L Double Chambers Clothes Balers

    NK-T90L double-chamber Clothes baler The double-chamber clothes baler is used for the compression and Baling Machine of old clothes, towels, rags, fabrics and other materials.

    It is also known as an open double-chamber baler, a rotatable dual-chamber baler, or a two-case baler. This baler is designed with two compression chambers. The two compression chambers are rotated and balanced by a central shaft. The double cavity can realize feeding in one cavity and compressing the bale in the other cavity, which greatly improves the work efficiency. When the block is compressed,the cavity will have a signal to automatically carry the box, so that it can be easily bundled. This double-chamber clothes baler combines the dual advantages of the double-chamber baler and the suitcase baler, and is currently the most efficient, user-friendly and labor-saving garment baler in the industry.

    cc561b38ee076be9aa635a9ef866467 拷贝.png

    The double-chamber clothes baler produced by NICKBALER has always had its own uniqueness, because we believe that only by making our products more refined and more distinctive, our sales will be broader. If necessary, feel free to contact us at 86-29-86031588


  • Features of foam Baling machine

    The Baling Machine generally consists of five parts: the pressing part, the crushing part, the electrical control part, the pressure control part and the power part. So what are its characteristics? Let's find out

    1. The compression ratio is large, and the maximum capacity can be reduced by 50 times.

    2. Save storage space, save transportation and storage costs

    3. The compressed PS material is easy to recycle

    4. Large-scale models can operate synchronously with the conveyor belt to improve production efficiency

    mmexport1562302687362.jpg

    Foam Baling Machine is our main product for many years, we have very valuable experience, if you want to know more, about us https://www.nickbaler.net


Recommended products
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
  • Waste paper baling machine with manufacturer price
  • Manufacturer supply scrap paper baling machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • Tony.wang@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top