In logistics, batches of express parcels are concentrated and distributed to various places. In this link, the parcel waste paper and waste paper baler is a key factor, and the parcel waste paper and waste paper baler packs a large number of express parcels from the same place. Treatment, so as to facilitate the transportation of goods, save space and resources. In online shopping, the annual Double Eleven is equivalent to a shopping carnival. Some large shopping malls and online malls will launch a large number of promotional discount activities to further promote the increase in the market transaction volume of goods. At this time, the logistics industry also ushered in. There is a big wave of transportation, large and small parcels are piled up like a mountain, and higher requirements are placed on the waste paper baler. The efficiency of the waste paper baler is the primary condition. The second is the level of automation, the packaging effect, and the work efficiency of the waste paper baler is related to the overall work. Speed, so the waste paper baler is very important for manufacturers.
With the development of society, our consumption patterns are diversified, and shopping patterns are constantly changing. Nowadays, shopping is more fashionable than online shopping. With the development and growth of some online shopping malls, online shopping has gradually integrated into our lives, providing many conveniences to our lives. One of the necessary procedures for online shopping is the distribution of logistics. Therefore, the popularization and development of online shopping drives the progress and development of the logistics industry at home and abroad. As long as there is a distribution point across provinces and regions, it can be delivered, which solves the geographical restrictions, time restrictions and space of shopping. limits.
With the improvement of living standards, if waste paper balers want to make long-term progress, they must first carry out technological innovation. Technological innovation and reform are a good strategy for the development and progress of waste paper balers. Technical innovation is to wrap waste paper. The essence of the advancement of waste paper baler. www.nickbaler.net
For the purpose of protecting the environment, the country has strict control measures on the deforestation of virgin forests, and now it is an era of high paper and cardboard output and consumption, which has caused a serious shortage of paper-making raw materials. Nowadays, wood is mainly used as the main raw material for papermaking. In the planning of the papermaking industry, it is clearly stated that in the future, the papermaking raw materials should form a wood fiber material, increase the recycling rate of waste paper, and encourage the diversification of non-wood raw materials. Raw material structure. From this point of view, as a form of non-wood fiber papermaking, reed pulping and papermaking has very important practical significance in our country.
By analyzing the status quo of the papermaking, animal husbandry and straw wood-based panel industries, it is concluded that the demand for these three industries will increase at a relatively high rate now and in the future, but at the same time they have to face the situation that the lack of raw materials affects production. Modern production and processing techniques have solved the feasibility of using reed as a raw material in these three industries. my country is rich in reed resources, but except for a small part of the reed resources that are used, most of them are in a primitive state of self-sustaining. The reason is that the general reed growing area is far away from the factory, and the transportation cost of loose reeds is high, which restricts enterprises. The use of reeds. It is under this background that a reed baler is proposed to solve the serious loss of tonnage caused by loose materials and low bulk density during transportation by packaging the reeds. The reed is packed by a baler to increase the bulk density of the reed, so as to achieve the purpose of reducing freight and increasing the utilization rate of the reed.
NKBALER is a professional manufacturer of waste paper baler, carton baler, straw baler, paper shell hydraulic baler, clothing hydraulic baler, rice husk hydraulic baler, plastic bottle hydraulic baler and other automatic balers and semi-automatic balers Manufacturer.
1. Shearing oil cylinder: It is a double-acting single-piston rod type oil cylinder. Its front end is connected with the frame, and the rear part is connected with the machine base by lower pins (one on each side), and the frame shaft is driven by the push-out and retraction of the piston rod. swing. Implement the cutting action.
2 Frames: The frame is an important flowing part. The left side of the front part is equipped with an upper shear. The middle is connected with the frame by the frame shaft and frame bushing, and the rear is connected with the upper pin shaft of the shear cylinder. .
3. Machine base: It is composed of welding base, left frame, right frame, etc. The right frame and the left frame of the base are welded parts, of which the right and left frames use inner and outer (double) side plates, and the structure is firm.
4. There is a platform and a slope at the front of the machine base, and a lower shear is installed between them. There is a large hole in the middle of the left and right frames for installing the frame, and there is a hole in the rear for installing the shearing cylinder. The front part of the frame is welded with a pressure material cylinder bracket, which is used to install the pressure material cylinder and other portal metal shears.
NICKBALER has rich production experience and integrated services. Using our balers can greatly improve work efficiency and reduce human and financial expenditures. Contact us at 86-29-86031588 or https://www.nkbaler.net/.
The semi-automatic plastic bottle Baling machine is mainly used for Baling machinewaste products, but because it is semi-automatic packing, it needs to be worn manually. Many friends do not know how to operate it. NKBALER has summarized the following points based on experience , I hope it can help everyone.
Semi-automatic plastic bottle Baling machine strapping method:
1. Install the pp tape on the pp tape mounting roller.
2. There is a brake pad connected to the "L"-shaped metal rod on the roller and the fuselage. There are two white rollers on the metal rod. middle.
3. After the upper and lower extensions are inserted, press the connecting spring on the front of the upper extension (the machine is turned on at this time).Line packing.
The above is the method of wearing the semi-automatic plastic bottle baler. I believe that through the introduction, everyone has a deeper understanding of how to operate the plastic baler. If you have other questions, you can leave a message for consultation.https://www.nkbaler.net/.