News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
Reasons for the automatic waste paper baler to be waterproof
Author : admin Time : 21-04-13 AllPageView : 253

People are becoming more and more aware of environmental protection, and the fully automatic waste paper baler can realize the recycling and reuse of waste paper, so it has been widely used. There are still a lot of attention when using the fully automatic waste paper baler. In terms of matters, such as waterproofing, why should the automatic waste paper baler be waterproof?

1. Water erodes the metal materials in the hydraulic drive system of the waste paper baler, reducing the service life of the components, and the eroded particles fall into the system software and cause damage.

2. Accelerate oily mildew, especially when there are particles of iron, copper, manganese, etc., the oxygen in the water and the air quickly oxidizes the oil and transforms it into a thick polymer, collectively referred to as grease stain. When the application temperature of the waste paper baler exceeds 65 degrees, the air oxidation rate accelerates, and the chemical effect increases exponentially for every 10 degrees increase.

全废纸1-2.jpg

3. The wettability of the automatic waste paper baler is reduced. When using the plastic strapping of the automatic waste paper baler, it is not necessary to make the plastic strapping dirty and damaged. If you pay attention to it, it is generally not easy to get dirty. However, there is a situation to pay attention to. The staff is wearing the strap. After belting, I forgot to close the door of the belt storage box of the automatic waste paper baler, and immediately pressed the button to send the belt, causing all the plastic packaging belts to fall to the ground. Therefore, the actual operation staff must be careful when working.

Nick Machinery has rich production experience and integrated service. Using our balercan greatly improve work efficiency and reduce human and financial expenditure. Contact consultation 86-29-86031588 or www.nickbaler.net 


Recommended news
  • Saudi tire balers market

    Customers can choose their own models according to their actual conditions. Tire balers are now in a situation where all kinds of tire balers coexist in the market. Because of its significant advantages, tire balers are increasingly occupying a larger market mainstream.

    The tire baler equipment is also being updated from time to time, and technology is advancing. For example, the tire balers were also manually tightened from the beginning. Later, the tire balers have been developed into the fully-active computer-controlled balers with active rope ties in recent years, and they have quickly become the mainstream in the shopping malls, used tire balers, So what are the advantages of tire balers;

    Because automatic production also reduces many disadvantages caused by human operation, manual and semi-active balers can significantly improve production efficiency compared with fully-active tire balers. It also reduces the labor intensity of workers.

    The volume of the material is greatly reduced, and the density of the bale produced by the tire baler is greater. This saves shipping costs. Customers who have used both generations of equipment should have a deep understanding.

    Due to the hydraulic system used by the tire balers, the package appearance is more neat. The tire balers can also enhance our company's technical strength and corporate image.

    The tire baler is not easy to be scattered during loading, unloading and transportation, because the density of waste products packed into the tire baler is high. Will not pollute the environment.

    DSC01727 拷贝.jpg

    The tire baler saves electricity bills. Greatly reduce the energy consumption of the equipment.

    In the future, NKBALER will continue to research and innovate rubber tire balers to serve consumers better and more assuredly.


  • Operation matters of Myanmar straw baler

    Grasp the hydraulic principle of the straw baler, know which spool must be closed and which spool must be opened in a specific operation. If the closed spool cannot be completely closed, the opened spool cannot be opened, which will inevitably cause the oil flow to go wrong and cause a hydraulic failure.

    As a qualified operator of the straw baler, we should master some operations of the straw baler during normal operation. The following are some of the contents we need to master.

    1. Familiar with the working steps of each working mechanism of the straw baler.

    2. Familiar with the position and function of each switch of the straw baler.

    3. Master the electric beat table of the electromagnet in each working step of the straw baler.

    4. Grasp the control principle of the opening and closing of the cartridge valve core of the straw baler.

    2-2秸秆.jpg

    When a failure occurs, you cannot simply search for the cartridge valve part. The failure may also involve mechanical jamming, electrical part failure, and other hydraulic component failures. Therefore, when a straw baler failure occurs, a comprehensive and careful inspection must be performed to distinguish the type of failure (mechanical, electrical, and hydraulic) in order to quickly eliminate the failure. In the process of troubleshooting the hydraulic failure, do not install the object wrongly or reversely. Otherwise, not only the fault cannot be eliminated, but also the fault becomes difficult to judge.

  • Morocco Horizontal Hydraulic Baler Advantages

    This product has the characteristics of good rigidity and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. Waste paper baler is widely used in various waste paper factories, waste recycling companies and other units and enterprises. It is suitable for packaging and recycling waste paper, plastic straw, etc. It is to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation. Good equipment for cost.

    mmexport1619686061967 拷贝.jpg

    1. This machine is suitable for compressing and Press loose materials such as waste paper and newspapers.

    2. This machine uses a high-performance, low-noise hydraulic circuit system, and uses imported hydraulic accessories; the whole machine has stable performance and low vibration.

    3. Fast and simple wire binding device, low failure rate, easy to clean, maintain and repair.

    4. Freely set the package length and accurately record the package value.

    5. Easy to install, no special site infrastructure is required.


Recommended products
  • Cow Dung Dewatering Machine Manufacturers
  • Cow Dung Dring Machine Price
  • Cow Dung Compressor Supplier
  • NK8060T15 Diesel Engine Baler
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top