News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
Renewable function of metal baler
Author : admin Time : 21-04-16 AllPageView : 316

The metal baler can be used for product recycling and processing to turn these product waste into treasure, which greatly helps the company's product renewal function.

Through the operation of the metal baler, the volume of our original waste products has been reduced a lot, so that our transportation process has become more convenient and convenient for us to carry. Moreover, after the waste is pressed into blocks, it is not only convenient to transport, but also the recovery rate is relatively high. During the entire production process, we did not pass any chemical action, so to a large extent the performance of the original material was preserved intact.

Nowadays, domestic companies advocate energy conservation, and many companies have increased awareness. With the development of the economic market, metal balers are well-known by more and more companies, and even used as important production equipment by companies.

金属2-2.jpg

The important thing is that the metal baler has changed the industries in the economic chain, responded to the country's long-term economic policy development, and continued to follow the path of sustainable and stable development. The benefits of choosing a metal baler are very obvious, not to mention the benefits to the enterprise.

The metal baler can squeeze all kinds of metal scraps, steel shavings, scrap steel, scrap aluminum, scrap copper, etc. into rectangular, cylindrical, octagonal and other shapes of qualified charge to reduce transportation and torch costs.

Nick Metal Balers are mainly used in steel mills, recycling and processing industries, and non-ferrous and ferrous metal smelting industries. www.nickbaler.net


Recommended news
  • Routine inspection of NICKBALER brand automatic baler

    The automatic waste paper baler needs to be turned on and checked before it is used. It can be put into use after the startup and check everything is normal. The check contents are as follows:

    1. The location, temperature and cleanliness of hydraulic oil. Hydraulic oil is generally not a problem, so it only needs to be checked regularly.

    2. It is summer now, and the rain is relatively abundant. If the baler is placed outdoors, be sure to do a good job of coping with it before and after the rain. Such as: whether the circuit is smooth, whether there is water in the box

    3. Check whether the conveying of the conveyor is normal

    4. Look around the machine, comprehensively check whether the equipment is normal, and ensure that the work is correct before feeding.

    If the operator develops the good habit of daily inspection, it can not only maintain the normal production of the equipment, but also bring greater value to the production.

    NKW250Q 02.jpg

    NICKBALER Machinery warmly reminds you: When using the baler, you should strictly follow the operating instructions. For more information on maintenance, please follow us https://www.nickbaler.net


  • Hydraulic baler cylinder

    The hydraulic baler mainly uses the hydraulic cylinder to "output" objects, but once the hydraulic cylinder has a problem, it will not only affect the normal use, but also need to determine the fault. Today, some customers responded that the hydraulic baler oil cylinder could not go up and down, as if it was stuck. What is the cause? How can we trouble shoot the problem?

    First check the hydraulic baler oil cylinder and eliminate it step by step as follows:

    1.First find a pressure gauge to check the pressure in the valve? And know the stroke and working pressure of the hydraulic cylinder.

    2.Check each fitting on the hydraulic valve block for oil seepage or leakage. And know if the manual generation or the control generation is working properly.

    3.Whether the load when the hydraulic cylinder is loaded is abnormal.

    4.To remove the above is to see if the working pressure of the overflow raft is low, and then adjust it.

    5.If none of the above is to consider whether the cylinder is stuck or there is an obstruction in the valve block.

    NICKBALER machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other baling machine equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!


  • Process 10 tons of waste paper balers per day?

    How to choose the type to process 10 tons of waste paper every day?

    First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;

    If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?

    1. The architecture is different

    2. Different packing methods

    3. The output is different

    NKW 250Q 01.jpg

    Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net


Recommended products
  • RDF baler's maintance
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • info@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top