With the gradual influx of waste paper hydraulic baler series equipment into people's daily lives, people's living standards have been improved to some extent, and as the people's favorite waste paper hydraulic baler equipments have performed even more in the progress of the times. Efforts in the development of the market are even more shining. This gives people more convenience.
The development of the market is better served by the needs of consumers. The progress of the times has brought about more improvement in people's lives. It has continuously given people a higher class of living conditions, and the continuous use of waste paper hydraulic balers series products. Efforts have been made to get a good response from the market. The help brought to people's lives has been affirmed, and they have been continuously enjoyed by consumers. With the progress of the times, hydraulic baler products have increased in strength and brought more convenience to people. No matter what kind of development, the waste paper hydraulic baler series products have made some progress and brought more and more people's surprises. In the future development of the era, it is hoped that it will bring more convenience to people. And work hard.
The progress of the packaging industry has brought about some changes and progress in people’s lives. It continues to give people more colors of life, and it has also been applied to waste paper hydraulic balers equipment products along with the advanced technology of science and technology. It has more power to bring new chapters of life to people, leading people to move further forward.
Waste paper hydraulic baler equipment, according to the size of the model and customer requirements for production efficiency, will choose to configure waste paper hydraulic baler conveyor equipment. Conveyors can save manpower, increase the working efficiency of waste paper hydraulic balers, save our human investment. However, the conveyor must be determined based on actual production and comprehensively considered in many aspects. The final decision is whether to configure the conveyor equipment.
We have a complete range of waste paper hydraulic balers and we have a variety of specifications and models of waste paper hydraulic balers. At the same time, we can change the structure of the equipment according to the special needs of the site. These different specifications and models are suitable for different scales of production.
The small waste paper hydraulic baler is suitable for a small amount of waste paper per day. This model is generally not configured with conveyor equipment, but if you want to save human resources or in the case of insufficient human resources, you can configure the conveyor equipment, under normal circumstances need to support the conveyor equipment to speed up the entire machine Packaging efficiency of the equipment.
Because the daily packing capacity of these models is very large, the manpower is less than the supply of the host package is in short supply. This will reduce the packing efficiency of the waste paper packer as a whole. Therefore, the conveyor needs to be configured under normal production conditions.
However, if the packaged site has sufficient human resources and it is hoped to save some equipment investment in the early stage, it is recommended not to use a conveyor. Rely on artificial feeding, but need to meet the timely supply of materials.as more information ,please visit : www.nickbaler.net
1. The equipment should be operated by human beings, and others are not allowed to use it arbitrarily without training.
2. Before driving, check whether all parts are normal and whether the fasteners are firm.
3. It is prohibited to cut unannealed steel parts, cast iron parts, soft metal parts, over-thin parts, parts less than 100 mm in length, and parts that exceed the length of the scissors.
4. During operation, the human body is forbidden to be close to the transmission part and the knife edge of the equipment, and the safety of the surrounding personnel should be paid attention to to prevent the material from lifting up and hurting people. When cutting, the material should be cut as close as possible to the inside of the knife. When cutting shorter materials, do not use hand-held workpieces to feed materials, and use clamps to feed materials.
5. When the equipment is running, the operator is not allowed to leave the post privately, and the power supply should be blocked when the operation is over or temporarily leaving the post.
Nick machinery does not need to install anchor screws, in places where there is no power supply can use diesel engines as power. For more information, contact 86-29-86031588
This series of equipment is classified into two types: vertical type and horizontal type.
Components:
This series of equipment is mainly composed of the following components:
①Main machine: It is composed of frame, main hydraulic cylinder, pusher hydraulic cylinder, bottom hydraulic cylinder, matching mold frame and mold, and indenter number.
The frame part is composed of upper and lower beams and uprights. The upper and lower beams are all made of all cast steel parts. The upper and lower beams are connected by inner and outer nuts with four columns to withstand the tension during operation.
The main hydraulic cylinder eliminates steel castings and eliminates safety hazards. Ensure the service life and operational safety of the equipment. Supporting mold frames and molds, the top number of indenters, through professional planning, cooperation, and superior processing capabilities are the guarantee for an outstanding taste of the equipment.
②Hydraulic station: It is composed of motor, hydraulic pump, pump protection device, professional control valve block and piping system for connecting briquetting machine. The planning is reasonable and the quality is stable. Equipped with a cooling system to prevent the equipment from being unable to operate continuously due to overheating of the oil.
③Console: It is composed of electrical system and plc control system.
Equipped with an adjustable text display, the sequence of actions and each action moment are completely controlled by the PLC system, and can be adjusted by the operator at any time, which is convenient and quick, simple and easy to understand.
Nick Machinery's metal baler is mainly suitable for steel mills, recycling and processing industries and non-ferrous and ferrous metal smelting industries. Contact consultation telephone 86-29-86031588
The mechanical processing method is to use special scrap steel processing machinery to process the scrap steel, to achieve the purpose of improving the quality of the scrap steel, which is conducive to the tempering of the furnace and the convenience of transportation.
There are many types of scrap steel processing machinery, and users can choose appropriate scrap steel processing equipment according to the processing requirements of scrap steel and the scale of production and economic capacity of the enterprise.
At that time, scrap steel processing equipment was divided into processing and auxiliary feeding equipment. Processing methods include Baler, briquetting, cutting, crushing, etc.
1. Mechanical packaging method
The mechanical baling method is to use a metal baler at room temperature to limit the frivolous steel scrap into bales with a certain shape and density. This kind of bale can be exercised in the furnace, and it is also easy to transport, which saves transportation capacity and reduces environmental pollution during transportation. The equipment used is a metal baler.
2. Mechanical briquetting method
Many metal cutting processes in the production process of the machinery industry produce a lot of steel chips, cast iron chips, copper chips, aluminum chips and other chips. If these chips are discarded, it will not only waste resources, but also severely pollute the environment. Taking it back and returning it to the oven after processing is a useful way to deal with it.
The processing equipment for metal chips is a metal chip briquetting machine, whose processing method is to directly limit cast iron chips, copper chips, and aluminum chips into a cylinder with a higher density at room temperature. If it is a long strip of steel shavings, the steel shavings should be broken before the restriction, and then restricted.
The scrap steel briquettes processed by the briquetting machine generally have a density of more than 4500kg/m3, which greatly reduces the volume of the scraps, improves the transportation capacity and can be returned to the furnace for exercise, and can also reduce the environmental pollution during transportation. The equipment used is: Metal briquetting machine.
3. Mechanical shearing method
The so-called shearing is to use a scrap shearing machine to cut the long strip of steel scrap to a suitable length for training. Nowadays, the scrap steel shearing machine has three types of structure: crocodile type, double-edged crocodile type and portal type. The equipment used is: metal shearing Machine, box-type shearing machine, heavy-duty shearing machine, etc.
Nick Machinery's automatic hydraulic baler is an unmanned operation of fully automatic compression and Baler, suitable for places with a lot of materials, reducing labor expenditures and improving work efficiency. https://www.nickbaler.net
