News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
What are the reasons for the increase in the temperature of the hydraulic oil of the metal baler
Author : admin Time : 21-04-21 AllPageView : 379

As the temperature rises, the temperature of the hydraulic oil of the metal baler also rises. The temperature of the rising hydraulic oil is not only affected by the surrounding environment, but also affected by other reasons. When the temperature of the hydraulic machine oil is found to rise, the customer can find out the reasons from the following aspects:

1. Poor heat dissipation of the metal baler

Too thick dirt deposited on the surface of the radiator will cause heat and poor ventilation, resulting in excessively high oil temperature in the hydraulic oil tank; low liquid level and insufficient circulating oil in the system will result in high temperature in the system.

2. Improper pressure adjustment of the metal baler

The adjustment of the system pressure relief valve is too high to perform normal overflow and pressure reduction, resulting in an increase in internal leakage and a rise in temperature.

3. Hydraulic pump suction

The air sucked by the hydraulic pump mixes with the air in the oil too much, forming "cavitation", and under high hydraulic shock, it is accompanied by strong vibration and noise, which leads to a rapid rise in temperature.

金属8-2.jpg

4. Parts wear

Severe wear and tear on hydraulic system components can cause the system to overheat. Many parts of the components in the system rely on the sealing gap. Once the hydraulic components are worn, this will increase the internal leakage, which will lead to an increase in temperature and a decrease in the viscosity of the oil. Finally, the internal leakage will further increase, resulting in oil temperature. Further increase, forming a vicious circle.

5. Leak

In the process of energy transfer, if the leakage is serious, the volume loss of the system will be increased, and the energy loss will be converted into the high temperature heat energy of the system. If the element space is too small, the friction between relative motions can also increase the temperature of the oil; and the gap is too large, causing serious leakage.

Nick Machinery's metal baler is easy to operate, and does not require foot screws for installation. It can be equipped with a diesel engine for power operation where there is no power supply. www.nickbaler.net


Recommended news
  • How does Kenya prevent the aging of plastic hydraulic balers?

    The protection status of the plastic hydraulic baler often determines the service life of the machine itself and the working power of the machine. The plastic hydraulic baler itself is actually a type of high-precision machinery. High-precision machinery has very high process requirements. Structural parts need to be strictly inspected before mass production. Insufficient internal density will lead to problems and faults in plastic hydraulic balers. Faced with this, the large or regional brand plastic hydraulic baling machinery manufacturers on the market at that time did a good job. Therefore, We should pay attention to this.

    1.When choosing a plastic hydraulic baler, try to choose brand products.

    2.The problem of proper use of itself, everything has a shipping cost, and the high strength and overloaded working strength shorten the service life of the plastic baler, so the customers who use the plastic hydraulic baler should be moderate in their use.

    3.The daily maintenance of plastic hydraulic balers is the basic work of equipment protection, and it must be institutionalized and standardized. For the regular protection and maintenance of plastic hydraulic balers, work quotas and material consumption quotas should be formulated and checked according to the quotas.The regular protection and maintenance operations of plastic hydraulic balers should be included in the audit content of the worker contract responsibility system.

    4.The regular inspection of the plastic hydraulic baler is a planned preventive inspection. In addition to the human senses, the inspection method should also be checked regularly.

    5.The plastic hydraulic baler equipment should also be thoroughly inspected and dealt with: inspection of oil cylinders, oil pumps, electrical appliances, and various sliding parts. The protection of the plastic hydraulic baler should comply with the protection regulations.

    The protection specification of the plastic hydraulic baler is the requirements and regulations for the daily protection of the equipment. Following the protection specification of the plastic hydraulic baler can prolong the service life of the equipment and ensure a safe and comfortable working environment.

    微信图片_202206220828158.jpg

    Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. Follow NICKBALER: https://www.nickbaler.net


  • Features of MSW Baling Press Machine

    1. The structure of the hydraulic MSW horizontal baler is mainly closed-door and open-door structure. The closed-door structure can make the density of the bales larger, which is suitable for the compression and baling machine of more items, hydraulic opening and closing, manual bundling, safe and fast operation.Open door structure, both sides are locked, continuous delivery, automatic threading (wire) or hooking (wire), automatic bundling, and faster operation.

    2. Imported PLC programming, LCD screen, simple, clear and clear at a glance.

    3. The connection method of the ball joint hydraulic cylinder is not prone to failure and increases the use time of the cylinder.

    4. Thickened steel plate, the fuselage is firmer.

    5. The oil circuit is standardized, and the hydraulic oil pipe hose is rarely used, which avoids the oil leakage phenomenon caused by the loosening of the screw due to the vibration of the machine, and also reduces the potential safety hazard.

    6. A variety of operation methods.

    7. Energy saving, low noise.

    mmexport1560419350147 拷贝.png

    All of NICKBALER Machinery's balers can do the job you need and are very easy to operate. If you have any questions, you can go to NICKBALER's website to learn.https://www.nickbaler.net.


  • NK-T90L Double Chambers Clothes Balers

    NK-T90L double-chamber Clothes baler The double-chamber clothes baler is used for the compression and Baling Machine of old clothes, towels, rags, fabrics and other materials.

    It is also known as an open double-chamber baler, a rotatable dual-chamber baler, or a two-case baler. This baler is designed with two compression chambers. The two compression chambers are rotated and balanced by a central shaft. The double cavity can realize feeding in one cavity and compressing the bale in the other cavity, which greatly improves the work efficiency. When the block is compressed,the cavity will have a signal to automatically carry the box, so that it can be easily bundled. This double-chamber clothes baler combines the dual advantages of the double-chamber baler and the suitcase baler, and is currently the most efficient, user-friendly and labor-saving garment baler in the industry.

    cc561b38ee076be9aa635a9ef866467 拷贝.png

    The double-chamber clothes baler produced by NICKBALER has always had its own uniqueness, because we believe that only by making our products more refined and more distinctive, our sales will be broader. If necessary, feel free to contact us at 86-29-86031588


Recommended products
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
  • Waste paper baling machine with manufacturer price
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • Tony.wang@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top