News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
Small waste paper baler is versatile and powerful
Author : admin Time : 20-03-07 AllPageView : 335

Our company specializes in the production of waste paper balers. The small waste paper balers produced are widely used. The products are widely used in the packaging of soft fiber materials and iron scraps in various industries (such as plush, cotton, linen, clothing, cloth). , Towels, paper edges, and waste plastics bring great convenience and considerable economic benefits to the storage and transportation of customer goods. There are 4 sets of wire feeding devices for waste metal balers, each corresponding to a packing head, and each set includes a packing line Conveying device and anti-tensioning device of packing line. The main rail seat of the waste paper hydraulic packing machine is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compaction frame are guided to run along the outside of the two rails to push the compaction frame. The operating hydraulic cylinder is arranged in it. In addition, in addition to the mechanical components, there is a complete set of hydraulic stations. 

As can be seen from the above description, various movements of the waste paper hydraulic baler are completed by fluid power. The waste paper baler is used in the normal state. The waste paper and similar products are squeezed and compacted, and packed with special packaging tape to reduce the volume greatly, so as to reduce the volume of transportation, save freight, and increase benefits for the enterprise. The introduction of advanced technology and advanced technology of similar products at home and abroad. Fully automatic waste paper baler is a mechatronic product, mainly composed of mechanical system, control system, feeding system and power system. The entire packaging process is by pressing. , Backhaul, pick-up, transfer, outbound packet outbound, outbound packet outbound, packet receiving and other auxiliary time.

 The stage of the baler development and production of our factory has been from manual to semi-automatic to fully automatic. The compact waste paper baler has a compact model with a weight of only 500 kg. The compact body is not only easy to handle and easy to handle.

The small waste paper baler not only has a compact model and takes up little space, but also has a beautiful and reasonable appearance design and smooth lines. The small waste paper packer adopts the characteristics of international standards and advanced foreign technology, and has made great breakthroughs in terms of standard level, design and manufacturing technology and product quality.

Compared with other automatic balers, the unique characteristics of small waste paper balers are that it has fast binding speed, low noise during work, saves consumables, etc. It is suitable for a variety of small goods, especially for post offices where the frequency of large items is low. use. The launch of the small waste paper baler, due to its unique performance, leads the way, is loved and affirmed by consumers, and is loved by users. The future development trend of the baler is to fully automated, advanced and diversified. To extend, our factory is committed to developing balers for various uses. In order to serve our customers! as more information ,please visit : www.nickbaler.net 


Recommended news
  • The impact of environmental awareness on waste paper baler

    With the increasing use of waste paper baler machinery, the frequency of use has gradually increased. However, there are still some people who may not know the waste paper baler very well. Some people even think that the waste paper baler is a waste paper recycling machine. Some people even think that it is the evolution of the waste paper basket. In fact, this is not the case. The waste paper baler is actually an existence for more convenient recycling of waste paper. The waste paper baler can compress and integrate waste paper to facilitate recycling and transportation.

    People's awareness of environmental protection is getting stronger and stronger, and environmental problems are becoming more and more serious. Every one of us citizens should fulfill their environmental protection obligations and contribute to environmental protection. Therefore, under the background of environmental protection, the waste paper baler came into being and was well received. Our waste paper packaging technology is not particularly perfect, but we are also following in the footsteps of foreign advanced technology, and we are constantly innovating and improving. 

    8-2废纸.jpg

    The waste paper baler can pack some waste paper for recycling and reuse, which is mainly suitable for some large paper mills or large users of paper products. And the waste paper baler can also recycle old things such as plastic straws.

    The application of waste paper baler greatly reduces the loss of manpower and material resources, and is convenient and fast, simple to use, and large-area waste paper baling and recycling is of great significance to environmental protection and avoiding waste.

    NICKBALER waste paper baler can be designed and customized according to the actual site of the customer. www.nickbaler.net

  • The influence of hydraulic system on waste paper baler

    The cleaning operation of the hydraulic system inside the waste paper baler is very important to the baler, because the waste paper baler needs a good hydraulic system when working. Therefore, in daily work, the cleaning of the baler should not be underestimated and must be taken seriously. Below, let's take a look at the precautions for cleaning the waste paper baler:

    When cleaning the waste paper baler, a low-viscosity special cleaning oil should be used. The clean oil is added to the fuel tank of the waste paper baler and heated to 50-80 degrees Celsius. Start the hydraulic pump and let it run dry. When cleaning the baler, you must often knock on the tube. This can remove the attachments. Clean for about 20 minutes. Check the contamination status of the oil filter, and clean the filter, and then clean it again. Repeat until there are not many contaminants on the filter. It’s okay when it’s time.

    The cleaning time of waste paper baler is generally 2 hours. For the more messy hydraulic system, each area can be cleaned according to the work area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate to clean the system.

    7-2废纸.jpg

    After cleaning, the clean oil must be drained, and the inside of the oil tank must be cleaned. When the waste paper baler system is restored to the normal operating state, add the specified hydraulic oil.

    Nick Machinery's waste paper baler has the characteristics of easy installation and operation, safe and reliable use, strong adaptability to the workplace, and reasonable price. www.nickbaler.net

  • Technological innovation is the top priority for the development of waste paper baler

    After years of development, waste paper baler has formed a considerable scale, although the scale of development of my country's baler industry has been very large. Nowadays, the development of all walks of life is inseparable from innovation. If the vertical waste paper baler can be developed in terms of technological innovation, at the same time in response to the call of the country, it will also bring more economy to the vertical waste paper baler equipment enterprises. interest.

    The new technology of vertical waste paper baler can increase the output of equipment. Although my country's waste paper baler industry has developed so fast in the past two years and the export volume has increased significantly, it is undeniable that there are still many shortcomings in the vertical waste paper baler

    If these problems are not improved in a short time, it will inevitably affect the development of the baler industry and the position of the vertical waste paper baler in the baler industry. The concentration of my country's baler industry is not enough, production capacity is scattered, and economies of scale cannot be formed. At present, the production capacity of the vertical waste paper baler has developed rapidly, but the technological progress of the industry is relatively slow, and the R&D and innovation capabilities are low. The service life and reliability of the vertical waste paper baler have gradually been unable to meet the needs of technological development. Therefore, technological innovation is urgently needed.

    The vertical waste paper baler is currently still stuck on capacity expansion, which makes China's baler industry lack a certain brand effect. Therefore, in terms of technological innovation of vertical waste paper baler, we must increase efforts to make contributions to my country's baler industry.

    6-2废纸.jpg

    The quality of the vertical waste paper baler is inseparable from the oil cylinder, and the function of the oil cylinder determines the stability of the baler. Similarly, the quality of hydraulic oil also affects the failure rate and service life of the cylinder. The cylinder needs to use No. 46 anti-wear hydraulic oil to ensure the efficient production of the baler.

    In the current baler industry, many small manufacturers are reluctant to develop and research new products, and will blindly imitate the products of large baler manufacturers. This is also an important factor leading to the slow development of the waste paper baler market.

    With the management philosophy of "Integrity creates the brand, and quality determines the future", Nick Machinery continues to improve the mechanism, strengthen brand awareness, and make products with excellent quality and better after-sales service. www.nickbaler.net


Recommended products
  • NK8060T15 Diesel Engine Baler
  • Wood Shaving Bedding Machine
  • PET Bottle Baling Press Nick Baler
  • Automatic Waste Paper Box Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top