Scrap steel baler is a large-scale machine, this kind of machine is relatively long in use, in the process of long-term use, it is inevitable that there will be wear and tear. After the baler wears out, its operation will be more or less affected, and it will also bring certain losses to the enterprise. Therefore, after the scrap balers are worn out, they must be processed in time to allow them to work normally.
The temperature of the scrap baler will continue to rise during use. Once it is not working, the parts of the baler will cool, and the volume of the connected parts will also hinder each other's internal force changes. If the internal force exceeds the maximum part When it resists pressure, it will break. At this time, the scrap baler cannot continue to work. Therefore, everyone must pay more attention to the use of the scrap baler.
When the scrap baler is in use, it is found that the parts are deformed, and it must be repaired to change the deformed condition of the parts. When you use it again, you must be careful. When repairing the baler, it is necessary to consider from many aspects, it is best to also calculate the weight of the parts, so as not to let the parts appear out of balance.
At present, the scope of use of the baler is very wide. We need to learn more about the characteristics and methods of use of the baler, so as to ensure the normal use of the baler, and relatively reduce the probability of failure of the baler.
Nick Machinery keeps abreast of market development trends, continuously enhances its innovation capabilities to meet the needs of the ever-changing market, and strives to launch more Balers that meet the needs of the society. www.nickbaler.net
The automatic waste paper baler needs to be turned on and checked before it is used. It can be put into use after the startup and check everything is normal. The check contents are as follows:
1. The location, temperature and cleanliness of hydraulic oil. Hydraulic oil is generally not a problem, so it only needs to be checked regularly.
2. It is summer now, and the rain is relatively abundant. If the baler is placed outdoors, be sure to do a good job of coping with it before and after the rain. Such as: whether the circuit is smooth, whether there is water in the box
3. Check whether the conveying of the conveyor is normal
4. Look around the machine, comprehensively check whether the equipment is normal, and ensure that the work is correct before feeding.
If the operator develops the good habit of daily inspection, it can not only maintain the normal production of the equipment, but also bring greater value to the production.
NICKBALER Machinery warmly reminds you: When using the baler, you should strictly follow the operating instructions. For more information on maintenance, please follow us https://www.nickbaler.net
The hydraulic baler mainly uses the hydraulic cylinder to "output" objects, but once the hydraulic cylinder has a problem, it will not only affect the normal use, but also need to determine the fault. Today, some customers responded that the hydraulic baler oil cylinder could not go up and down, as if it was stuck. What is the cause? How can we trouble shoot the problem?
First check the hydraulic baler oil cylinder and eliminate it step by step as follows:
1.First find a pressure gauge to check the pressure in the valve? And know the stroke and working pressure of the hydraulic cylinder.
2.Check each fitting on the hydraulic valve block for oil seepage or leakage. And know if the manual generation or the control generation is working properly.
3.Whether the load when the hydraulic cylinder is loaded is abnormal.
4.To remove the above is to see if the working pressure of the overflow raft is low, and then adjust it.
5.If none of the above is to consider whether the cylinder is stuck or there is an obstruction in the valve block.
NICKBALER machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other baling machine equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!
How to choose the type to process 10 tons of waste paper every day?
First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;
If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?
1. The architecture is different
2. Different packing methods
3. The output is different
Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net