News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
What are the solutions to the abnormal pressure of the waste paper baler?
Author : admin Time : 20-03-09 AllPageView : 386

According to our increasing national awareness, we are using more and more waste paper balers, but when working with waste paper balers, sometimes we encounter abnormal pressure on the baler. This situation usually occurs mainly because The oil filter is blocked, the system oil viscosity is too low, and the motor power (refers to the amount of work performed by the object in a unit of time) is insufficient. The reasons for the abnormal pressure of the waste paper baler are explained below. Solution. The waste paper packing machine is used to squeeze and solidify waste paper and similar products under normal conditions, and use special packaging tape to pack and shape, so that its volume is greatly reduced, so as to reduce the volume of transportation, save freight, and increase benefits for enterprises. Introduced advanced technology and advanced technology of similar products at home and abroad. The lead frame of the full-automatic waste paper baler is composed of 4 sets of lead devices installed on a frame. The entire lead frame is suspended on a central axis of the compaction frame and moves horizontally relative to the compaction frame under the action of a hydraulic motor. The compaction frame is a welded component, and the bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of a hydraulic cylinder. The lifting platform is mainly bolted by two horizontal beams. The lifting platform can be moved up and down in the vertical direction by the pushing of two hydraulic cylinders.

First, the reasons for the abnormal pressure of the waste paper baler are as follows:

1. The oil filter is blocked, the liquid flow path is too small, and the oil viscosity is too high to suck oil.

2. The oil viscosity of the system is too low and the leakage is serious. Excessive air in oil and severe infection.

3. The motor power (referring to the amount of work done by the object in unit time) is insufficient and the speed is too low. The tubing is connected incorrectly. Damaged pressure gauge.

Second, the solution to the abnormal pressure of the waste paper baler:

1. When installing and debugging the hydraulic pump of the waste paper baler, carefully read the instruction manual and strictly implement the requirements of the installation and commissioning process regulations. There are 4 sets of wire feeding devices for waste metal balers, each corresponding to a baling head, and each set includes a baling line conveying device and a baling line anti-tensioning device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The compactor wheels are guided to run along the outside of the two tracks, and hydraulic cylinders that push the compactor to run are arranged in it. In addition, in addition to the mechanical components, there is a complete set of hydraulic stations. It can be seen from the above description that various movements of the waste paper hydraulic baler are completed by the power of the fluid. Check the suction and discharge ports of the pump. Fill the pump with hydraulic oil before starting the pump. The inlet and outlet ports of the hydraulic pump must be well sealed and must not leak or enter the air. If it is confirmed that air has entered, you can butter the sealing part and see if the noise of the pump is reduced to determine whether air has entered during the operation of the pump.

2. When assembling the hydraulic pump of the waste paper baler, it is necessary to perform the cleaning and assembly process procedures. For example, the blades in the vane pump must not be installed backwards, and the movement must be live. Pump internal parts processing, storage and transportation must strictly implement the drawings and various technological requirements, strict inspection system before assembly, unqualified parts, can not be installed on the pump.as more information ,please visit: www.nickbaler.net 


Recommended news
  • The impact of environmental awareness on waste paper baler

    With the increasing use of waste paper baler machinery, the frequency of use has gradually increased. However, there are still some people who may not know the waste paper baler very well. Some people even think that the waste paper baler is a waste paper recycling machine. Some people even think that it is the evolution of the waste paper basket. In fact, this is not the case. The waste paper baler is actually an existence for more convenient recycling of waste paper. The waste paper baler can compress and integrate waste paper to facilitate recycling and transportation.

    People's awareness of environmental protection is getting stronger and stronger, and environmental problems are becoming more and more serious. Every one of us citizens should fulfill their environmental protection obligations and contribute to environmental protection. Therefore, under the background of environmental protection, the waste paper baler came into being and was well received. Our waste paper packaging technology is not particularly perfect, but we are also following in the footsteps of foreign advanced technology, and we are constantly innovating and improving. 

    8-2废纸.jpg

    The waste paper baler can pack some waste paper for recycling and reuse, which is mainly suitable for some large paper mills or large users of paper products. And the waste paper baler can also recycle old things such as plastic straws.

    The application of waste paper baler greatly reduces the loss of manpower and material resources, and is convenient and fast, simple to use, and large-area waste paper baling and recycling is of great significance to environmental protection and avoiding waste.

    NICKBALER waste paper baler can be designed and customized according to the actual site of the customer. www.nickbaler.net

  • The influence of hydraulic system on waste paper baler

    The cleaning operation of the hydraulic system inside the waste paper baler is very important to the baler, because the waste paper baler needs a good hydraulic system when working. Therefore, in daily work, the cleaning of the baler should not be underestimated and must be taken seriously. Below, let's take a look at the precautions for cleaning the waste paper baler:

    When cleaning the waste paper baler, a low-viscosity special cleaning oil should be used. The clean oil is added to the fuel tank of the waste paper baler and heated to 50-80 degrees Celsius. Start the hydraulic pump and let it run dry. When cleaning the baler, you must often knock on the tube. This can remove the attachments. Clean for about 20 minutes. Check the contamination status of the oil filter, and clean the filter, and then clean it again. Repeat until there are not many contaminants on the filter. It’s okay when it’s time.

    The cleaning time of waste paper baler is generally 2 hours. For the more messy hydraulic system, each area can be cleaned according to the work area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate to clean the system.

    7-2废纸.jpg

    After cleaning, the clean oil must be drained, and the inside of the oil tank must be cleaned. When the waste paper baler system is restored to the normal operating state, add the specified hydraulic oil.

    Nick Machinery's waste paper baler has the characteristics of easy installation and operation, safe and reliable use, strong adaptability to the workplace, and reasonable price. www.nickbaler.net

  • Technological innovation is the top priority for the development of waste paper baler

    After years of development, waste paper baler has formed a considerable scale, although the scale of development of my country's baler industry has been very large. Nowadays, the development of all walks of life is inseparable from innovation. If the vertical waste paper baler can be developed in terms of technological innovation, at the same time in response to the call of the country, it will also bring more economy to the vertical waste paper baler equipment enterprises. interest.

    The new technology of vertical waste paper baler can increase the output of equipment. Although my country's waste paper baler industry has developed so fast in the past two years and the export volume has increased significantly, it is undeniable that there are still many shortcomings in the vertical waste paper baler

    If these problems are not improved in a short time, it will inevitably affect the development of the baler industry and the position of the vertical waste paper baler in the baler industry. The concentration of my country's baler industry is not enough, production capacity is scattered, and economies of scale cannot be formed. At present, the production capacity of the vertical waste paper baler has developed rapidly, but the technological progress of the industry is relatively slow, and the R&D and innovation capabilities are low. The service life and reliability of the vertical waste paper baler have gradually been unable to meet the needs of technological development. Therefore, technological innovation is urgently needed.

    The vertical waste paper baler is currently still stuck on capacity expansion, which makes China's baler industry lack a certain brand effect. Therefore, in terms of technological innovation of vertical waste paper baler, we must increase efforts to make contributions to my country's baler industry.

    6-2废纸.jpg

    The quality of the vertical waste paper baler is inseparable from the oil cylinder, and the function of the oil cylinder determines the stability of the baler. Similarly, the quality of hydraulic oil also affects the failure rate and service life of the cylinder. The cylinder needs to use No. 46 anti-wear hydraulic oil to ensure the efficient production of the baler.

    In the current baler industry, many small manufacturers are reluctant to develop and research new products, and will blindly imitate the products of large baler manufacturers. This is also an important factor leading to the slow development of the waste paper baler market.

    With the management philosophy of "Integrity creates the brand, and quality determines the future", Nick Machinery continues to improve the mechanism, strengthen brand awareness, and make products with excellent quality and better after-sales service. www.nickbaler.net


Recommended products
  • NK8060T15 Diesel Engine Baler
  • Wood Shaving Bedding Machine
  • PET Bottle Baling Press Nick Baler
  • Automatic Waste Paper Box Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top