News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
NICKBALER waste carton Baler can be customized according to customer requirements
Author : admin Time : 21-05-17 AllPageView : 294

With the development of society, only focusing on the quality of waste paper box balers is no longer enough to satisfy the development of our waste paper box balers. Waste paper box balers are a service product.

The waste paper box balers will inevitably have some failures during the use process. The safety of the waste paper box balers is very important. The waste paper box balers are generally worn out by parts in operation. Unsuccessful operation will cause parts. If the damage is not handled in time, it may be affected by the failure, so it is very important to quickly find the failure and repair of the parts of the waste carton Baler.

It is necessary to pay attention to safety and improve safety awareness during the Baler Press process of waste paper baler. To ensure the safety of the person and the waste carton Baler, "safety is the most important" at all times.

4-2废纸.jpg

Nick Machinery specializes in the production of various waste paper box balers. The technology is first-class, and the price of waste paper box balers is the lowest. In our opinion, it is impossible to do without good packaging technology. Then how do we distinguish it? The first is that it can be very good. To understand the needs of customers, the biggest advantage of the waste paper box baler is that it can be designed and customized according to the actual requirements of the customers.

After years of technical improvement of NICKBALER, the baler produced by our company has absolute advantages in quality and efficiency at home and abroad. www.nickbaler.net


Recommended news
  • Routine inspection of NICKBALER brand automatic baler

    The automatic waste paper baler needs to be turned on and checked before it is used. It can be put into use after the startup and check everything is normal. The check contents are as follows:

    1. The location, temperature and cleanliness of hydraulic oil. Hydraulic oil is generally not a problem, so it only needs to be checked regularly.

    2. It is summer now, and the rain is relatively abundant. If the baler is placed outdoors, be sure to do a good job of coping with it before and after the rain. Such as: whether the circuit is smooth, whether there is water in the box

    3. Check whether the conveying of the conveyor is normal

    4. Look around the machine, comprehensively check whether the equipment is normal, and ensure that the work is correct before feeding.

    If the operator develops the good habit of daily inspection, it can not only maintain the normal production of the equipment, but also bring greater value to the production.

    NKW250Q 02.jpg

    NICKBALER Machinery warmly reminds you: When using the baler, you should strictly follow the operating instructions. For more information on maintenance, please follow us https://www.nickbaler.net


  • Hydraulic baler cylinder

    The hydraulic baler mainly uses the hydraulic cylinder to "output" objects, but once the hydraulic cylinder has a problem, it will not only affect the normal use, but also need to determine the fault. Today, some customers responded that the hydraulic baler oil cylinder could not go up and down, as if it was stuck. What is the cause? How can we trouble shoot the problem?

    First check the hydraulic baler oil cylinder and eliminate it step by step as follows:

    1.First find a pressure gauge to check the pressure in the valve? And know the stroke and working pressure of the hydraulic cylinder.

    2.Check each fitting on the hydraulic valve block for oil seepage or leakage. And know if the manual generation or the control generation is working properly.

    3.Whether the load when the hydraulic cylinder is loaded is abnormal.

    4.To remove the above is to see if the working pressure of the overflow raft is low, and then adjust it.

    5.If none of the above is to consider whether the cylinder is stuck or there is an obstruction in the valve block.

    NICKBALER machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other baling machine equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!


  • Process 10 tons of waste paper balers per day?

    How to choose the type to process 10 tons of waste paper every day?

    First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;

    If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?

    1. The architecture is different

    2. Different packing methods

    3. The output is different

    NKW 250Q 01.jpg

    Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net


Recommended products
  • RDF baler's maintance
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • info@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top