The metal briquetting machine is fully hydraulically controlled, and the electrical main control part adopts PLC control, and the whole working process can realize automatic operation. The system is equipped with a manual working program, which is convenient for the adjustment of forward, backward, mold opening, and mold closing actions. The equipment is equipped with one-time and two-time feeding procedures to facilitate the pressing of metals of different shapes and sizes. According to customer requirements, automatic feeding and discharging devices can be added.
There are some precision parts in the hydraulic transmission system of the metal briquetting press. The operator feels convenient and labor-saving for the hydraulic transmission of the machine. However, its disadvantage is that it is quite easy to damage. The reason can not be analyzed is that it is not clear about its structural characteristics and working principle, so it is not known how to prevent and maintain it.
The hydraulic system of the metal briquetting machine has three factors: air ingress, pollution, and overheating. These three factors are all very bad. There is a close internal connection between them, and the connection is relatively strong. If there is a problem on any one side, another one or more problems will occur together. Through long-term practice, it has been concluded that 75% of the causes of diseases in hydraulic systems have a lot to do with these three aspects. One is overheating; two, the working fluid is deteriorated due to the dirt entering; third, it enters the air.
Solution: The assembly and cleaning of some main precision parts in the system must be carried out in a very clean room. Closed doors and windows, clean floors, and good room temperature are all indispensable factors indoors.
Nick Machinery's metal briquetting machine has the characteristics of reasonable and simple structure, convenient installation, long use time and high working efficiency. www.nickbaler.net
With the development of the economy and the continuous innovation of science and technology, more and more people are now paying attention to environmental protection, and environmental issues have also attracted attention, making the straw baler more popular, and its advantages are becoming more and more prominent. What are the advantages of the straw baler? ? Please see the analysis below
1. It is very versatile, mainly for packing some large or loose items.
2. Save storage space and recycle waste items.
3. The parts of the straw baler have high structural performance and good work efficiency, which reduces labor and transportation costs.
Only a high-quality baler can be better trusted by customers, and only by understanding the performance of the baler, can the straw baler be better utilized and used. Follow NICKBALER, let you grow more https://www.nickbaler.net
Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. https://www.nickbaler.net
The straw baler must be inspected and maintained at ordinary times to ensure that it can operate normally. While ensuring the characteristics and working efficiency of the straw baler, the following 4 points must be done:
1. Check the screws of each component of the straw baler on time to prevent falling off or bursting;
2. Pay attention to the moisture-proof, waterproof, anti-corrosion and fly-proof of some electrical equipment. The interior of the electrical control cabinet and the terminal block must be kept clean to prevent common failures of electrical equipment;
3. The machine of the straw baler is broken. The two heat-sealing rollers should be in the extended position to prevent the baling machine products from being scalded.
4. Lubricate the junction of each transmission gear, the oil filling hole of the bearing with seat and the oil pump of each movable component of the straw baler on time.
5. When the straw baler is filled with grease, it is not necessary to drop droplets on the transmission belt of the transmission system to prevent damage caused by deviation and vibration or aging of the transmission belt.
For more information about the fault maintenance and maintenance work of the straw baler, please pay attention to the website of NICKBALER M: https://www.nickbaler.net
1. The operator should be strictly trained and qualified before using the machine.
2. When the ambient temperature is less than 2°C above zero, the straw baler is not allowed to be used.
3. When the moisture content of straw and pasture is more than 65%, the straw baler is not allowed to be used.
4. The operator is not allowed to pour liquids such as bacteria water on the baler while bundling.
5. The straw baler is not allowed to have 2 boring cars per hour.
6. When using the motor as power, it is necessary to install the grounding wire.
7. It is necessary to clean up the small silt under the straw baler in time. If there are too many scraps, it may damage the machine parts.
If you are still unclear, you can continue to pay attention to our website https://www.nickbaler.net, and you are welcome to contact us at any time , thank you for reading.
