News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
Hydraulic straw baler improves crop production
Author : admin Time : 21-05-18 AllPageView : 283

The hydraulic baler has strong flexibility. The hydraulic baler can be driven by a diesel engine. It is equipped with wheels below for easy movement, so the flexibility is better. This is also one of the reasons for the high sales. This machine is mainly used for straw processing. Processing, the following analysis of its practicality:

First of all, in terms of objective factors, there will be a large amount of straw after the harvest of crops every year, and the straw baler can be combined with the silk rolling machine, shredder, etc. to carry out in-depth processing of it, to achieve full utilization of waste resources, and the entire production The process is noise-free and pollution-free, and meets the requirements of energy-saving and environmentally friendly social development.

5-2秸秆.jpg

Secondly, in terms of user production needs, straw balers are usually used in breeding, animal husbandry and other industries. The finished products processed by this machine can directly feed cattle, sheep and other livestock. After processing, it can also greatly save volume and facilitate storage and transportation.

NICKBALER hydraulic straw baler can turn a lot of green garbage into treasure, protect the environment, increase the utilization rate of rural soil, and conform to the concept of environmental protection. www.nickbaler.net

Recommended news
  • Routine inspection of NICKBALER brand automatic baler

    The automatic waste paper baler needs to be turned on and checked before it is used. It can be put into use after the startup and check everything is normal. The check contents are as follows:

    1. The location, temperature and cleanliness of hydraulic oil. Hydraulic oil is generally not a problem, so it only needs to be checked regularly.

    2. It is summer now, and the rain is relatively abundant. If the baler is placed outdoors, be sure to do a good job of coping with it before and after the rain. Such as: whether the circuit is smooth, whether there is water in the box

    3. Check whether the conveying of the conveyor is normal

    4. Look around the machine, comprehensively check whether the equipment is normal, and ensure that the work is correct before feeding.

    If the operator develops the good habit of daily inspection, it can not only maintain the normal production of the equipment, but also bring greater value to the production.

    NKW250Q 02.jpg

    NICKBALER Machinery warmly reminds you: When using the baler, you should strictly follow the operating instructions. For more information on maintenance, please follow us https://www.nickbaler.net


  • Hydraulic baler cylinder

    The hydraulic baler mainly uses the hydraulic cylinder to "output" objects, but once the hydraulic cylinder has a problem, it will not only affect the normal use, but also need to determine the fault. Today, some customers responded that the hydraulic baler oil cylinder could not go up and down, as if it was stuck. What is the cause? How can we trouble shoot the problem?

    First check the hydraulic baler oil cylinder and eliminate it step by step as follows:

    1.First find a pressure gauge to check the pressure in the valve? And know the stroke and working pressure of the hydraulic cylinder.

    2.Check each fitting on the hydraulic valve block for oil seepage or leakage. And know if the manual generation or the control generation is working properly.

    3.Whether the load when the hydraulic cylinder is loaded is abnormal.

    4.To remove the above is to see if the working pressure of the overflow raft is low, and then adjust it.

    5.If none of the above is to consider whether the cylinder is stuck or there is an obstruction in the valve block.

    NICKBALER machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other baling machine equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!


  • Process 10 tons of waste paper balers per day?

    How to choose the type to process 10 tons of waste paper every day?

    First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;

    If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?

    1. The architecture is different

    2. Different packing methods

    3. The output is different

    NKW 250Q 01.jpg

    Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net


Recommended products
  • RDF baler's maintance
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • info@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top