News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
The economic benefits brought by the waste carton Baler
Author : admin Time : 21-05-27 AllPageView : 289

Today's society must be guided by economic development. With the rapid development of my country's market economy system, most things can be considered by price, and the same is true for project investment in waste carton Balers. The waste carton Baler has many advantages, leaving aside the part that benefits the people, the rest is all economic benefits.

Today, I will explain to everyone what economic benefits the used carton Baler has:

1. Save labor cost:

Before using the waste carton Baler to compress and pack, it takes a lot of human resources to pack piles of waste paper, and the efficiency is very low, and the labor cost is very high. The key function of the waste carton Baler is to replace manual services. It packs waste paper and waste paper boxes. The work efficiency is very high. And the automation technology of the waste carton Baler is also more and more developed. The production line is usually operated by several people. The capacity is equal to the labor of tens or even hundreds of employees, which greatly saves the cost of labor services.

2. Save warehousing logistics and logistics costs:

The raw materials that can be compressed and packaged with a waste carton Baler are generally relatively bulky and scattered, such as waste paper boxes, cardboard, newspapers, and straws. This kind of raw materials often has a characteristic, that is, the volume is quite large, whether it is stacked storage or long-distance freight, it takes up a large area, and the cost of warehousing logistics and logistics is high. However, after the waste carton Baler compresses and packs, the problem is solved well, and it is conducive to stacking. Whether it is warehouse storage or freight transportation, it provides great convenience and saves a lot of cost.
6-2废纸.jpg

3. Enhance the economic development use value of raw materials themselves:

The economic development use value of raw materials such as waste paper, waste plastic, straw, etc. has long been squeezed out. If it is used as a waste material, it will not be sold at a good price. However, after compression and packaging according to the waste paper baler, the previous waste has The use value that has been re-used, the price can increase a lot, this is the profit model of the waste carton Baler and the use value of economic development.

NICKBALER continues to improve the mechanism, strengthen brand awareness, make the product quality better, better after-sales service, and serve customers in many ways, so that new and old customers are satisfied. www.nickbaler.net


Recommended news
  • Process 10 tons of waste paper balers per day?

    How to choose the type to process 10 tons of waste paper every day?

    First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;

    If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?

    1. The architecture is different

    2. Different packing methods

    3. The output is different

    NKW 250Q 01.jpg

    Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net


  • How to clean the hydraulic system of the baler in the Philippines?

    1. String the baling pressrope of the hydraulic baler through the automatic spring tightening device behind the garbage compressor, and place it along the baling pressbelt groove, then tie the baling press belt to the pull-stop at the bottom of the baling pressgroove, and rotate the automatic spring tightening device 90 degrees , close the bottom door and lock

    2. Put the recycled waste paper, plastic and film waste into the hydraulic baler. When the material is loaded to the height of the pressure plate, close the door tightly and press the "press down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door)

    3. The pressure plate moves down and compresses to the maximum pressure and automatically returns to the fully open position. When compressing the baling pressconstraints, the platen stops at the preset position of the compressed material

    4. Open the door of the device and pass the tie rope through the bottom wire groove from front to back and back to the front through the pressure plate wire groove. Tighten the tie rope by hand and tie a knot. Push the baling press rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "Up" button, the return trip of the oil cylinder will automatically turn out the bundled bundles. (When opening the lower door, it is not allowed to go in front of the door。

    Stand up to avoid accidental injury from the door popping open)

    5. After the bale is ejected, reset the bale rod to press down. Finally, remove the bales of waste paper and plastic waste before stacking them for storage, close and lock the door and enter the next packaging cycle task

    NKW250Q 02.jpg

    The hydraulic baler produced by NICKBALER has a simple structure, stable operation, low failure rate and easy cleaning and maintenance. You are welcome to buy https://www.nickbaler.net


  • Daily maintenance of automatic hydraulic balers in India

    1. Before starting the machine, check whether the components of the baler are in good condition; whether the screws and nuts of each component are loose, if so, you need to tighten the screws and nuts, repair personnel to deal with.

    2. Check whether there is any debris blockage inside the machine. The debris blockage will affect the work of the automatic hydraulic baler, so it needs to be removed;

    3. Check whether the knife group and the sliding part are short of oil. If the oil is short, it will cause serious wear on the parts. It must be oiled by dipping and dripping. Use a small stick to dip the oil and slowly drip it on it.

    牛粪01.jpg

    For more information on the fault maintenance and maintenance work of the automatic hydraulic baler, please pay attention to the website of NICKBALER Machinery Company: https://www.nickbaler.net


Recommended products
  • RDF baler's maintance
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • info@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top