The common failures of the automatic straw baler are related to the maintenance standards of hydraulic machinery.
If the application and maintenance are good, the full-automatic straw baler will have a long service life. Taking certain effective measures to improve the normal maintenance of the hydraulic transmission system will benefit the increase in the service life of the straw baler.
Raising the usual maintenance of the straw balers is a fundamental way to prevent common failures of the fully automatic straw balers.
Prediction and analysis of the abnormality of the straw baler system Carry out regular execution or continuous detection of the operation of the hydraulic machinery of the fully automatic straw baler to identify its technical conditions or common failures of the hydraulic press, so that the common straw baler can be cleared before the failure of the straw baler occurs. The possibility of failure.
With the development trend of the failure detection technology of straw balers, the use of failure detection methods to predict, analyze and monitor the common failures of the hydraulic system of the straw balers in operation will further improve the credibility of the operation of the fully automatic straw balers.
The automatic waste paper baler needs to be turned on and checked before it is used. It can be put into use after the startup and check everything is normal. The check contents are as follows:
1. The location, temperature and cleanliness of hydraulic oil. Hydraulic oil is generally not a problem, so it only needs to be checked regularly.
2. It is summer now, and the rain is relatively abundant. If the baler is placed outdoors, be sure to do a good job of coping with it before and after the rain. Such as: whether the circuit is smooth, whether there is water in the box
3. Check whether the conveying of the conveyor is normal
4. Look around the machine, comprehensively check whether the equipment is normal, and ensure that the work is correct before feeding.
If the operator develops the good habit of daily inspection, it can not only maintain the normal production of the equipment, but also bring greater value to the production.
NICKBALER Machinery warmly reminds you: When using the baler, you should strictly follow the operating instructions. For more information on maintenance, please follow us https://www.nickbaler.net
The hydraulic baler mainly uses the hydraulic cylinder to "output" objects, but once the hydraulic cylinder has a problem, it will not only affect the normal use, but also need to determine the fault. Today, some customers responded that the hydraulic baler oil cylinder could not go up and down, as if it was stuck. What is the cause? How can we trouble shoot the problem?
First check the hydraulic baler oil cylinder and eliminate it step by step as follows:
1.First find a pressure gauge to check the pressure in the valve? And know the stroke and working pressure of the hydraulic cylinder.
2.Check each fitting on the hydraulic valve block for oil seepage or leakage. And know if the manual generation or the control generation is working properly.
3.Whether the load when the hydraulic cylinder is loaded is abnormal.
4.To remove the above is to see if the working pressure of the overflow raft is low, and then adjust it.
5.If none of the above is to consider whether the cylinder is stuck or there is an obstruction in the valve block.
NICKBALER machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other baling machine equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!
How to choose the type to process 10 tons of waste paper every day?
First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;
If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?
1. The architecture is different
2. Different packing methods
3. The output is different
Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net