Our waste plastic baler has now changed from the traditional packaging type to more diversified to meet the needs of our different users. Today we will analyze how the waste plastic baler type is operated and controlled for your convenience. Choose our baler type according to your actual situation. The waste paper packer is used to squeeze the waste paper and similar products under normal conditions, and pack it with special packaging tape to form it, which greatly reduces its volume, so as to reduce the transportation volume, save freight, and increase the benefits for the enterprise. Introduced advanced technology and advanced technology of similar products at home and abroad. There are 4 sets of wire feeding device for scrap metal baler, each set corresponds to a baling head, each set includes baling line conveying device and baling line anti-tensioning device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compression frame are guided to run along the outer sides of the two tracks, and the hydraulic cylinders that drive the operation of the compression frame are arranged therein.
In addition, there are a whole set of hydraulic stations besides mechanical components. As can be seen from the above description, various movements of the waste plastic baler are completed by the power of the fluid. Mineral water bottle packing machine This product has the characteristics of good rigidity and stability, beautiful appearance, easy operation and maintenance, safety and energy saving, low investment cost of equipment basic engineering and so on. It is widely used in various types of waste paper mills, old waste recycling companies and other unit enterprises. It is suitable for packaging and recycling of old waste paper and plastic straws. It is a good equipment for improving labor efficiency, reducing labor intensity, saving manpower, and reducing transportation costs.
The use of relatively small production is our manual baler. This requires manual operation to complete the entire process. Normally, there are: electric hot-melt and iron buckle clamping methods. The second point is that our semi-automatic baler type baler needs manual insertion of the baling tape before the machine can automatically complete the baling process of tape gathering, bonding, cutting and tape out. Since each product requires manual operation, the relative efficiency is low. The third point is that the automatic baler with technology is added. This baler does not require manual insertion. The triggering methods are divided into jog, manual, continuous play, ball switch, and foot switch. Just press the switch to complete the packaging automatically. Fast. It is suitable for large-scale production enterprises to choose an automatic unmanned baler. It does not require manual insertion of tape, and only needs to be set: the entire process of poly tape, bonding, cutting, and tape out can be automatically completed. 5 packages, speed: 2.0 seconds / channel.
With the rapid development of high technology, the waste plastic baler is gradually approaching the development of full intelligence. Adding technology gradually replaces manual and reduces the use of labor. This is also an inevitable trend. I am ready for your surprise, I hope you can watch us grow along the way. as more information ,please visit : www.nickbaler.net
The textile packing machine force is widely used in various garment factories, garment recycling stations and other units and enterprises. It is suitable for packing and recycling textiles and fabric strips. It is a good equipment to improve labor efficiency, reduce labor intensity, and reduce transportation costs.
Precautions for textile baler:
1. Pay attention to the grounding of the power cord, lightning protection, rain protection and moisture protection.
2. It is forbidden to use the hydraulic packing electric control cabinet by non-operators.
3. Pay attention to the antifreeze work of the motor and the long-term overload of the motor. Effective prevention of these two can reduce the damage of the motor and maintain the normal packaging of the textile baler.
4. Pay attention to the button operation of the console. Don't use too much force on the switch button, and prevent misoperation to avoid damage caused by short circuit.
NICKBALER clothing baler is based on market demand. The products start from simple and reasonable energy saving and pay attention to practicability, so as to serve more new and old customers. www.nickbaler.net
The dedicated vertical garment packing machine is divided into two kinds of single oil cylinder and double oil cylinder. It is mainly used for compressing and packing various garments, which is quick and easy to pack.
It is widely used for compression packaging of various garments such as cloth, textiles, sweaters, shirts, sweaters, underwear, socks, and export garments.
All doors of the equipment can be opened, and the packing is convenient. It adopts hydraulic manual control. It has the characteristics of simple operation, high packing efficiency, low investment cost, and multiple selection of pressing plate stroke parameters.
The ideal effect can be achieved by selecting the pressing plate stroke for compressing various garments. The inner box can be made of stainless steel, which saves manpower, improves labor efficiency, reduces labor intensity, and reduces transportation costs.
Now that the application of plastic bottle balers has become more and more extensive, what preparations should we make when applying this product?
Next, let's follow the editor to find out.
The plastic bottle baler works for a long time and reaches a certain service life. In order to make the equipment play the overall value, the old parts need to be replaced. There are several aspects that need attention in the process of replacing the cylinder of the plastic bottle baler.
According to the correct disassembly method, on the one hand, the disassembly process is smooth and not damage the equipment; on the other hand, it is also to take care of safety issues.
Before disassembling the hydraulic cylinder of the mineral water bottle Baler, drain the hydraulic oil in the two chambers of the hydraulic cylinder, then remove the end cover, and then pull out the piston rod and piston for disassembly.
When disassembling the parts, don't beat them forcefully. If it is unavoidable, a copper rod should be used to prevent damage to the parts of the Baler.
Some parts need tools, must use tools, do not beat or pry hard.
Some bolt-fastened parts use thread tightening agent during assembly, which is difficult to disassemble. If disassembling may break the bolts, the exposed part of the bolts can be heated to make the glue fall off before disassembling. .
When disassembling the hydraulic cylinder of the plastic bottle Baler, pay attention to whether there is a hydraulic lock on the cylinder. If so, remove the hydraulic lock first, otherwise there will be pressure from the hydraulic lock in the hydraulic cylinder, which will not only cause difficulty in disassembly, but also easy Cause equipment and personal injury.
When the hydraulic lock is removed, several layers of clean cotton cloth can be used to wrap the connecting part, and then loosen the screw to prevent high-pressure oil from spraying out.
NICKBALER plastic bottle Baling Press machine manufacturers have accumulated mature production technology for many years, and we are committed to providing customers with good service, low-cost and high-quality products. www.nickbaler.net