In recent years, the emergence of fully automatic hydraulic balers has made ordinary balers less brilliant than before.
This is why, let's take a look at the difference between the automatic baler and the ordinary baler.
1. Working principle:
The working principle of the automatic baler is different from that of the ordinary baler, one does not require manual operation, and the other requires manual operation.
It is precisely because of this difference that many factories will choose to use a fully automatic baler. For companies with higher production efficiency, it is more appropriate to choose a fully automatic baler.
2. Work efficiency:
Since the automatic Baler machine adopts automatic Baler, the work efficiency is higher than that of the ordinary Baler machine.
The operation mode of the automatic Baler machine is flexible, and the customer can operate according to their actual situation when operating.
3. Service life:
The service life of the fully automatic baler is longer than that of the ordinary baler, because it does not require much operation during work, and the probability of failure is relatively small, but the relatively short service life of the ordinary machine, in fact, it mainly depends on our maintenance, the machine Good maintenance will increase the service life accordingly.
4. Price:
Because the working principle is different, the working efficiency is different, and the configuration is different, so the price between the two is also very different.
The NICKBALER automatic hydraulic baler is an unmanned operation of automatic compression and baling, suitable for places with a lot of materials. www.nickbaler.net
With the development of the economy and the continuous innovation of science and technology, more and more people are now paying attention to environmental protection, and environmental issues have also attracted attention, making the straw baler more popular, and its advantages are becoming more and more prominent. What are the advantages of the straw baler? ? Please see the analysis below
1. It is very versatile, mainly for packing some large or loose items.
2. Save storage space and recycle waste items.
3. The parts of the straw baler have high structural performance and good work efficiency, which reduces labor and transportation costs.
Only a high-quality baler can be better trusted by customers, and only by understanding the performance of the baler, can the straw baler be better utilized and used. Follow NICKBALER, let you grow more https://www.nickbaler.net
Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. https://www.nickbaler.net
The straw baler must be inspected and maintained at ordinary times to ensure that it can operate normally. While ensuring the characteristics and working efficiency of the straw baler, the following 4 points must be done:
1. Check the screws of each component of the straw baler on time to prevent falling off or bursting;
2. Pay attention to the moisture-proof, waterproof, anti-corrosion and fly-proof of some electrical equipment. The interior of the electrical control cabinet and the terminal block must be kept clean to prevent common failures of electrical equipment;
3. The machine of the straw baler is broken. The two heat-sealing rollers should be in the extended position to prevent the baling machine products from being scalded.
4. Lubricate the junction of each transmission gear, the oil filling hole of the bearing with seat and the oil pump of each movable component of the straw baler on time.
5. When the straw baler is filled with grease, it is not necessary to drop droplets on the transmission belt of the transmission system to prevent damage caused by deviation and vibration or aging of the transmission belt.
For more information about the fault maintenance and maintenance work of the straw baler, please pay attention to the website of NICKBALER M: https://www.nickbaler.net
1. The operator should be strictly trained and qualified before using the machine.
2. When the ambient temperature is less than 2°C above zero, the straw baler is not allowed to be used.
3. When the moisture content of straw and pasture is more than 65%, the straw baler is not allowed to be used.
4. The operator is not allowed to pour liquids such as bacteria water on the baler while bundling.
5. The straw baler is not allowed to have 2 boring cars per hour.
6. When using the motor as power, it is necessary to install the grounding wire.
7. It is necessary to clean up the small silt under the straw baler in time. If there are too many scraps, it may damage the machine parts.
If you are still unclear, you can continue to pay attention to our website https://www.nickbaler.net, and you are welcome to contact us at any time , thank you for reading.
