News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
Common uses of Indian metal balers
Author : admin Time : 21-09-29 AllPageView : 245

We all know that the metal baler is a powerful tool for packaging metal scrap, but the scrap baler is one of the hydraulic baler types in the final analysis. There are many types and varieties of balers, so many people must do it early when buying. fully understand. In order to enable users to buy their ideal machine at the time of purchase, Nick Machinery will introduce the scrap baler below:

The composition of the metal baler is generally: main machine (frame, main hydraulic cylinder, pusher hydraulic cylinder, bottom hydraulic cylinder, supporting mold frame and mold, pressure head); hydraulic station (motor, hydraulic pump, pump protection device, professional Control valve block and piping system used to connect the baler); console (plc control system and electrical system). These three major components, three of which are indispensable components. At present, the most common scrap balers on the market are mainly used for hydraulic cold packaging of metal blocks by using hydraulic cylinders as power. Use the function of the product to squeeze various metal scraps, steel shavings, scrap steel, scrap iron, scrap copper, scrap aluminum, aluminum shavings, disintegrated car shells, waste oil drums and other metal materials under hydraulic pressure to compress them into various occupations. The shape body that needs to be used makes the supply of great convenience in transportation and storage. It not only improves the work efficiency of workers and reduces the cost of daily transportation, but also reduces the cost of raw materials, which can be described as killing two birds with one stone.

Metal balers are widely used in metal recovery and processing occupations, reuse occupations and metal forging industries. It can be said that they have played a revolutionary effect in this occupation, environmentally friendly, efficient, and invented more on the premise of reducing material costs. Great effect. All models use hydraulic drive mode, which can be adapted to both hydraulic and electrical environments, and can be driven by diesel engines, which provides convenient conditions for operators to a large extent. Safe operation, diversified adaptation to the environment, and large output make the baler a white-hot product in the market.

1 拷贝.jpg

From the perspective of traditional recovery processing and training occupations, the presentation of the baler really solves many unsolvable problems, and it is also a better metal processing equipment now. In the future market, as the industry develops faster and faster, the market demand for balers will definitely increase and will be adapted to more and more occupations. https://www.nickbaler.net


Recommended news
  • Process 10 tons of waste paper balers per day?

    How to choose the type to process 10 tons of waste paper every day?

    First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;

    If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?

    1. The architecture is different

    2. Different packing methods

    3. The output is different

    NKW 250Q 01.jpg

    Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net


  • How to clean the hydraulic system of the baler in the Philippines?

    1. String the baling pressrope of the hydraulic baler through the automatic spring tightening device behind the garbage compressor, and place it along the baling pressbelt groove, then tie the baling press belt to the pull-stop at the bottom of the baling pressgroove, and rotate the automatic spring tightening device 90 degrees , close the bottom door and lock

    2. Put the recycled waste paper, plastic and film waste into the hydraulic baler. When the material is loaded to the height of the pressure plate, close the door tightly and press the "press down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door)

    3. The pressure plate moves down and compresses to the maximum pressure and automatically returns to the fully open position. When compressing the baling pressconstraints, the platen stops at the preset position of the compressed material

    4. Open the door of the device and pass the tie rope through the bottom wire groove from front to back and back to the front through the pressure plate wire groove. Tighten the tie rope by hand and tie a knot. Push the baling press rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "Up" button, the return trip of the oil cylinder will automatically turn out the bundled bundles. (When opening the lower door, it is not allowed to go in front of the door。

    Stand up to avoid accidental injury from the door popping open)

    5. After the bale is ejected, reset the bale rod to press down. Finally, remove the bales of waste paper and plastic waste before stacking them for storage, close and lock the door and enter the next packaging cycle task

    NKW250Q 02.jpg

    The hydraulic baler produced by NICKBALER has a simple structure, stable operation, low failure rate and easy cleaning and maintenance. You are welcome to buy https://www.nickbaler.net


  • Daily maintenance of automatic hydraulic balers in India

    1. Before starting the machine, check whether the components of the baler are in good condition; whether the screws and nuts of each component are loose, if so, you need to tighten the screws and nuts, repair personnel to deal with.

    2. Check whether there is any debris blockage inside the machine. The debris blockage will affect the work of the automatic hydraulic baler, so it needs to be removed;

    3. Check whether the knife group and the sliding part are short of oil. If the oil is short, it will cause serious wear on the parts. It must be oiled by dipping and dripping. Use a small stick to dip the oil and slowly drip it on it.

    牛粪01.jpg

    For more information on the fault maintenance and maintenance work of the automatic hydraulic baler, please pay attention to the website of NICKBALER Machinery Company: https://www.nickbaler.net


Recommended products
  • RDF baler's maintance
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • info@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top