In automatic mode, the cylinder of the waste paper Baling Machine will not retreat:
1. After checking whether the relay of the relay relay has been turned on, it should be damaged.
2. The lights of the switch parts at the rear of the cylinder are off and should not be turned on.
3. Check if the overrun limit is close to the switch indicator and should be turned off.
The manual mode of the main cylinder of the waste paper Baling Machine will not be returned
1. Check the manual back button.
2. Check whether the relay works normally.
The function of the waste paper baler determines the stability of the baler. Waste paper packing airport operation method The paper packing machine shown in the figure is a larger hydraulic equipment, which also has certain requirements on the R & D and design site.
1. The site should be large enough, the size and volume of the carton packing machine are large, and the supporting conveyor also occupies a large position. Before purchasing equipment, the workshops required for R & D and production should be prepared in advance, and in addition, simple planning should be made according to the size of the equipment.
2. To carry out ground treatment, the paper shell baler is fixed, and the ground plane can make the equipment run more stable, and follow-up installation and maintenance work.
Shaanxi Nick machinery equipment can supply many kinds of baler machine
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on .
For more information ,please visit : www.nickbaler.net or www.nkbaler.com
even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time .
1. Automatic control mode, install the interlock switch
2. Independently install emergency stop button, which can stop emergency at any time in any state to ensure safety;
3. The pressure plate adopts the guide groove type balance to effectively prevent the tilt;
4. Hook type automatic package turning, easy to install;
5. Quickly lock and loosen the device, install it well and quickly.
Nick Machinery has rich production experience and integrated service. Using our baler can greatly improve work efficiency and reduce human and financial expenditure. Contact us at 86-29-86031588 or https://www.nickbaler.net
The automatic waste paper baler is a completely unmanned operation and is suitable for places with a lot of materials. After the articles are compressed and bundled, they are easy to store and stack and reduce transportation costs. The unique automatic strapping device of the automatic waste paper baler is fast, simple in structure, stable in action, low in failure rate and easy to maintain. The automatic waste paper baler is suitable for waste paper cartons, plastics, fabrics and large garbage disposal places.
The automatic waste paper baler is to increase profit margins for employees, reduce labor, and improve work efficiency.
The automatic waste paper baler production line is composed of the main machine, conveyor, hopper, and air cooling system.
The automatic waste paper baler has stable performance, high cost performance, simple operation and good safety performance. It is suitable for Baler all kinds of waste cardboard, waste paper boxes, waste paper shells, waste paper barrels, waste paper edges, waste plastics, and other waste garbage into blocks to achieve cost saving and convenient transportation.
The shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, cold shearing, pressing and flanging of various shapes of steel and various metal materials, as well as powdered products, plastics, glass steel, insulation Material and rubber compression molding. Let's take a look at what are the characteristics of the shearing machine?
1. The closed steel plate structure eliminates and reduces any side twisting or bending deformation.
2. The blade design improves productivity, and it is convenient to replace the blade, which can reduce the downtime of mechanical failure and optimize the productivity.
3. PLC hand-automatic control box. It can be installed and replaced manually and automatically. With remote control operation, it can realize remote start, stop and automatic operation.
4. Pushing trough with gland: It can realize automatic feeding, and the material will be cut along the gland and pushed into the main shearing machine.
5. The hydraulic system adopts advanced cartridge valve or slide valve system control, and implements a hydraulic press with button centralized operation.
Nick mechanical shears are suitable for metal recycling companies, scrap steel mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures. 86-29-86031588