With the increasing number of waste materials and the development of hydraulic technology, metal balers, metal shears, and metal chip briquetting machines are increasingly used in various material recycling processing points. Therefore, it is very important to ensure the normal operation of the hydraulic equipment system and increase the reliability of the work. The correct selection of the type and viscosity of the hydraulic oil is the first condition to ensure the long-term and reliable operation of the system.
On the other hand, when the hydraulic equipment system fails, it is also very important to be able to quickly find the cause and effectively solve it. The hydraulic equipment is composed of mechanical, hydraulic, electrical and instrumentation devices. Therefore, when analyzing the failure of the hydraulic equipment system, it is necessary to understand the transmission principle, structural characteristics, components and material configuration of the entire hydraulic system. Since the hydraulic equipment system is a sealed and pressurized system, it is difficult to observe the flow of oil in the pipeline, the movement of the internal parts of the hydraulic component and whether the seal is damaged, so it is difficult to analyze the cause of the failure and determine the location of the failure.
There are many reasons for the failure of hydraulic equipment systems such as metal balers, metal shears, and metal chip briquetting machines. Most of the reasons are: mechanical failure of the equipment, such as unreasonable design of the hydraulic equipment system, incorrect installation clearance, and hydraulic components Quality problems, improper selection of seals, etc., and operating errors caused hydraulic system failures---this refers to hydraulic equipment systems that are caused by improper operation of the operator during normal operation, such as incorrect operation sequence or incorrect opening and closing of valves, and normal operation When the power supply is suddenly interrupted, the temperature or pressure of the hydraulic oil is too high during work, no action is taken, the wrong oil is added when refueling, and the existing oil volume of the oil tank is too much or too little. In addition, the quality of the hydraulic oil causes the failure of the hydraulic equipment system. This is mostly caused by improper oil selection or the use of unqualified oil. It may also be caused by the hydraulic oil being used for a long time, and the new oil is not replaced in time.
NICKBALER automatic hydraulic baler is specially designed for compressing waste paper, waste cardboard, waste paper mills, waste, waste books, waste magazines, plastic films, straws and other loose items, it is designed as a high performance, continuous processing It is widely used in garbage recycling stations and large garbage treatment plants. So how to use the automatic baler correctly? There are the following, I hope you all know:
1. Strictly follow the instructions for use and must comply with our prescribed installation, disassembly, reorganization, start-up, operation and maintenance work procedures.
2. Operators need to be familiar with the operating procedures and have certain foresight of dangers
3. If the machine is damaged or faulty, be sure to send someone to repair it
4. It is not allowed to disassemble the equipment without authorization. If necessary, please consult the relevant personnel of our technical department
5. It is not an item in the compression category. Do not try it, so as not to damage the machine. If you want to try it, you need to consult carefully.
NICKBALER Machinery's automatic hydraulic baler has the characteristics of fast speed, simple structure, stable action, low failure rate and easy cleaning and maintenance. https://www.nickbaler.net 86-29-86031588
NICKBALER hydraulic baler features: convenient material refill, simple structure, small footprint, beautiful appearance, hydraulic door opening, high box body, fast delivery speed, high pressure, beautiful appearance and easy installation. It has good rigidity and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving. It is widely used in various waste paper factories, old recycling companies and other units and enterprises, and is suitable for the packaging and recycling of old waste paper, plastic straw, etc. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs.
With the increasing awareness of environmental protection, hydraulic balers have played a great role in reusing some solid wastes, and they are more and more accepted by everyone.
NICKBALER hydraulic balers keep up with the trend of the times and contribute to environmental protection.
NICKBALER hydraulic baler has fine workmanship, energy saving and electricity saving, good baling effect, beautiful appearance, and has been well received by users.
NICKBALER machinery waste cardboard baler has the characteristics of high work efficiency, low energy consumption, easy installation and operation, safe and reliable use, strong workplace adaptability, and reasonable price. Free consultation hotline 86-29-86031588
The automatic waste paper baler needs to be turned on and checked before it is used. It can be put into use after the startup and check everything is normal. The check contents are as follows:
1. The location, temperature and cleanliness of hydraulic oil. Hydraulic oil is generally not a problem, so it only needs to be checked regularly.
2. It is summer now, and the rain is relatively abundant. If the baler is placed outdoors, be sure to do a good job of coping with it before and after the rain. Such as: whether the circuit is smooth, whether there is water in the box
3. Check whether the conveying of the conveyor is normal
4. Look around the machine, comprehensively check whether the equipment is normal, and ensure that the work is correct before feeding.
If the operator develops the good habit of daily inspection, it can not only maintain the normal production of the equipment, but also bring greater value to the production.
NICKBALER Machinery warmly reminds you: When using the baler, you should strictly follow the operating instructions. For more information on maintenance, please follow us https://www.nickbaler.net