The main cylinder loading system of the straw baler includes two parts, an unloading circuit and a two-way locking circuit. The main cylinder is controlled by a plunger pump driven by an electric motor. There is a pilot-operated relief valve at the oil outlet of the plunger pump. When the outlet pressure of the pump is higher than the set pressure, the solenoid 3YA will be connected to the power supply, which will promote the unloading of the plunger pump, which is a kind of pressure overload. protection mechanism. It is a safeguard measure for the company's production safety.
The outlet pressure of the pump can be monitored in real time through a pressure gauge, and the pressure monitoring can be controlled in time. There is a cooler on the oil return line to control the temperature of the hydraulic oil well.
A pressure gauge is also installed at the oil inlet of the loading cylinder of the main cylinder, and a safety valve is also equipped to avoid excessive pressure as a safety device. When the pressure of the main cylinder of the straw baler exceeds the designed pressure value, the safety valve will start to unload.
NICKBALER makes full use of straw resources and suppresses straw burning, which can effectively control pollution, optimize the environment, and ensure the orderly progress of social and economic life. Can promote fresh air, smooth shipping and roads. https://www.nickbaler.net
With the development of the economy and the continuous innovation of science and technology, more and more people are now paying attention to environmental protection, and environmental issues have also attracted attention, making the straw baler more popular, and its advantages are becoming more and more prominent. What are the advantages of the straw baler? ? Please see the analysis below
1. It is very versatile, mainly for packing some large or loose items.
2. Save storage space and recycle waste items.
3. The parts of the straw baler have high structural performance and good work efficiency, which reduces labor and transportation costs.
Only a high-quality baler can be better trusted by customers, and only by understanding the performance of the baler, can the straw baler be better utilized and used. Follow NICKBALER, let you grow more https://www.nickbaler.net
Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. https://www.nickbaler.net
The straw baler must be inspected and maintained at ordinary times to ensure that it can operate normally. While ensuring the characteristics and working efficiency of the straw baler, the following 4 points must be done:
1. Check the screws of each component of the straw baler on time to prevent falling off or bursting;
2. Pay attention to the moisture-proof, waterproof, anti-corrosion and fly-proof of some electrical equipment. The interior of the electrical control cabinet and the terminal block must be kept clean to prevent common failures of electrical equipment;
3. The machine of the straw baler is broken. The two heat-sealing rollers should be in the extended position to prevent the baling machine products from being scalded.
4. Lubricate the junction of each transmission gear, the oil filling hole of the bearing with seat and the oil pump of each movable component of the straw baler on time.
5. When the straw baler is filled with grease, it is not necessary to drop droplets on the transmission belt of the transmission system to prevent damage caused by deviation and vibration or aging of the transmission belt.
For more information about the fault maintenance and maintenance work of the straw baler, please pay attention to the website of NICKBALER M: https://www.nickbaler.net
1. The operator should be strictly trained and qualified before using the machine.
2. When the ambient temperature is less than 2°C above zero, the straw baler is not allowed to be used.
3. When the moisture content of straw and pasture is more than 65%, the straw baler is not allowed to be used.
4. The operator is not allowed to pour liquids such as bacteria water on the baler while bundling.
5. The straw baler is not allowed to have 2 boring cars per hour.
6. When using the motor as power, it is necessary to install the grounding wire.
7. It is necessary to clean up the small silt under the straw baler in time. If there are too many scraps, it may damage the machine parts.
If you are still unclear, you can continue to pay attention to our website https://www.nickbaler.net, and you are welcome to contact us at any time , thank you for reading.
