News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
Beverage bottle Baler machine enables plastic reuse to reduce consumption
Author : admin Time : 21-10-13 AllPageView : 234

Beverage bottle balers are more common in the field at this stage, and demand has continued to increase. Beverage bottle balers, a new type of industry, quickly occupy the key machinery manufacturing industry in my country’s beverage bottles at this stage. The horizontal manufacturing is produced by everyone. The automatic beverage bottle packaging machine has beautiful appearance design, easy maintenance in actual operation, and high safety performance. The automatic beverage bottle packaging machine has excellent reliability at this stage and has been widely used in beverage bottle factories and waste recycling enterprises. And other corporate companies.

The packaging categories of beverage bottle Balers are mainly waste glass bottles, beverage bottles, waste cloth, waste plastic film, waste plastic foam and wood. Among them, waste cotton and hemp textile product packaging products can be made of high-quality plastic; wood can be multiplexed according to its quality, even if it is not purchased, because its basic composition of methyl cellulose is easy to rot, dissolve and be digested by the soil layer Absorption, there will be no residues, and it is not easy to cause adverse effects on the natural environment.

Other packaging wastes generally have a negative impact on the natural environment. Some of them have excellent reliability and are difficult to dissolve in nature, and over time they become the most critical waste on the earth. With the rapid development of plastic packaging products, the inability to adopt strong countermeasures for waste management methods, emergency disposal and reuse is also the key reason for this situation.

Use the beverage bottle balers to pack the waste products, especially plastics that can be purchased and used to save flowers, plants and trees... In the hydraulic transmission system of the beverage bottle balers, the working pressure of the fluid liquid damages the output power of the system, Leakage and working characteristics have a negative impact, but we only need to consider it in the design and installation of the pipeline, so that it can be completely manipulated within a smaller range of marked values.

mmexport1550914839742 拷贝.jpg

Since its establishment, Nick Machinery has developed into a production expert in the production of hydraulic machinery and equipment after years of hard work, pioneering and enterprising. https://www.nickbaler.net


Recommended news
  • Process 10 tons of waste paper balers per day?

    How to choose the type to process 10 tons of waste paper every day?

    First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;

    If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?

    1. The architecture is different

    2. Different packing methods

    3. The output is different

    NKW 250Q 01.jpg

    Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net


  • How to clean the hydraulic system of the baler in the Philippines?

    1. String the baling pressrope of the hydraulic baler through the automatic spring tightening device behind the garbage compressor, and place it along the baling pressbelt groove, then tie the baling press belt to the pull-stop at the bottom of the baling pressgroove, and rotate the automatic spring tightening device 90 degrees , close the bottom door and lock

    2. Put the recycled waste paper, plastic and film waste into the hydraulic baler. When the material is loaded to the height of the pressure plate, close the door tightly and press the "press down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door)

    3. The pressure plate moves down and compresses to the maximum pressure and automatically returns to the fully open position. When compressing the baling pressconstraints, the platen stops at the preset position of the compressed material

    4. Open the door of the device and pass the tie rope through the bottom wire groove from front to back and back to the front through the pressure plate wire groove. Tighten the tie rope by hand and tie a knot. Push the baling press rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "Up" button, the return trip of the oil cylinder will automatically turn out the bundled bundles. (When opening the lower door, it is not allowed to go in front of the door。

    Stand up to avoid accidental injury from the door popping open)

    5. After the bale is ejected, reset the bale rod to press down. Finally, remove the bales of waste paper and plastic waste before stacking them for storage, close and lock the door and enter the next packaging cycle task

    NKW250Q 02.jpg

    The hydraulic baler produced by NICKBALER has a simple structure, stable operation, low failure rate and easy cleaning and maintenance. You are welcome to buy https://www.nickbaler.net


  • Daily maintenance of automatic hydraulic balers in India

    1. Before starting the machine, check whether the components of the baler are in good condition; whether the screws and nuts of each component are loose, if so, you need to tighten the screws and nuts, repair personnel to deal with.

    2. Check whether there is any debris blockage inside the machine. The debris blockage will affect the work of the automatic hydraulic baler, so it needs to be removed;

    3. Check whether the knife group and the sliding part are short of oil. If the oil is short, it will cause serious wear on the parts. It must be oiled by dipping and dripping. Use a small stick to dip the oil and slowly drip it on it.

    牛粪01.jpg

    For more information on the fault maintenance and maintenance work of the automatic hydraulic baler, please pay attention to the website of NICKBALER Machinery Company: https://www.nickbaler.net


Recommended products
  • RDF baler's maintance
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • info@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top