Proper use of hydraulic baler machinery and equipment, careful implementation of maintenance systems and strict compliance with safe operating procedures are necessary conditions for extending the life of the machine, baler improving production efficiency and ensuring safe production. To this end, it is recommended that users establish maintenance and safe operation procedures. Operators should be familiar with the machine structure and operating procedures, and must also pay attention to the following points:
1 High-quality anti-wear hydraulic oil should be strictly used in the hydraulic oil added into the oil tank, must be strictly filtered, and should always maintain a sufficient amount of oil, and should be filled with oil immediately when insufficient.
2 The oil tank should be cleaned and replaced with new oil once every six months. The filtered oil should not exceed one month in a single cleaning. The new oil used once is allowed to be used again after strict filtration.
3 The lubricating parts of the machine should be filled with lubricant at least once per shift as required.
4 The debris in the bin should be cleaned in time.
5 Without learning, those who do not understand the structure, performance and operation rules of the machine shall not start the machine without permission.
6 When the machine has serious oil leakage or abnormal phenomena in the work, it should be stopped immediately to analyze the cause and eliminate the fault, and it must not be forced to run with disease.
7 During the operation of the machine, it is not allowed to repair or touch the moving parts, and it is strictly prohibited to press the materials in the bin with hands or feet.
8 When adjusting pumps, valves and pressure gauges, it must be done by experienced technical workers. If the pressure gauge is found to be faulty, it should be checked or updated immediately.
9 The user should formulate detailed maintenance and safe operation rules according to the specific situation of the hydraulic baler. The control system of the metal hydraulic baler is composed of the core control unit PLC and the man-machine interface used for operation. The core control unit is controlled by "PLC". The hydraulic system is the core part of the pressurized baler, and its reliability directly determines the packaging. Whether the operation of the machine is normal and reliable, which oil temperature control has become the key to the hydraulic control part of the metal hydraulic baler.
1. Automatic control mode, install the interlock switch
2. Independently install emergency stop button, which can stop emergency at any time in any state to ensure safety;
3. The pressure plate adopts the guide groove type balance to effectively prevent the tilt;
4. Hook type automatic package turning, easy to install;
5. Quickly lock and loosen the device, install it well and quickly.
Nick Machinery has rich production experience and integrated service. Using our baler can greatly improve work efficiency and reduce human and financial expenditure. Contact us at 86-29-86031588 or https://www.nickbaler.net
The automatic waste paper baler is a completely unmanned operation and is suitable for places with a lot of materials. After the articles are compressed and bundled, they are easy to store and stack and reduce transportation costs. The unique automatic strapping device of the automatic waste paper baler is fast, simple in structure, stable in action, low in failure rate and easy to maintain. The automatic waste paper baler is suitable for waste paper cartons, plastics, fabrics and large garbage disposal places.
The automatic waste paper baler is to increase profit margins for employees, reduce labor, and improve work efficiency.
The automatic waste paper baler production line is composed of the main machine, conveyor, hopper, and air cooling system.
The automatic waste paper baler has stable performance, high cost performance, simple operation and good safety performance. It is suitable for Baler all kinds of waste cardboard, waste paper boxes, waste paper shells, waste paper barrels, waste paper edges, waste plastics, and other waste garbage into blocks to achieve cost saving and convenient transportation.
The shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, cold shearing, pressing and flanging of various shapes of steel and various metal materials, as well as powdered products, plastics, glass steel, insulation Material and rubber compression molding. Let's take a look at what are the characteristics of the shearing machine?
1. The closed steel plate structure eliminates and reduces any side twisting or bending deformation.
2. The blade design improves productivity, and it is convenient to replace the blade, which can reduce the downtime of mechanical failure and optimize the productivity.
3. PLC hand-automatic control box. It can be installed and replaced manually and automatically. With remote control operation, it can realize remote start, stop and automatic operation.
4. Pushing trough with gland: It can realize automatic feeding, and the material will be cut along the gland and pushed into the main shearing machine.
5. The hydraulic system adopts advanced cartridge valve or slide valve system control, and implements a hydraulic press with button centralized operation.
Nick mechanical shears are suitable for metal recycling companies, scrap steel mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures. 86-29-86031588